Design of a d₃₃-mode piezocomposite electricity generating element and its application to bridge monitoring

Abstract

The piezoelectric effect is used in sensing applications such as in force and displacement sensors. However, the brittleness and low performance of piezoceramic lead zirconate titanate (PZT) often impede its applicability in civil structures which are subjected to large loads. The concept of a piezocomposite electricity generating element (PCGE) has been proposed for improving the electricity generation performance and overcoming the brittleness of piezoceramic wafers. The post-curing residual stress in the PZT layer constitutes a main reason for the PCGE’s enhanced performance, and the outer epoxy-based composites protect the brittle PZT layer. A d₃₃-mode PCGE designed for bridge monitoring application was inserted in a bridge bearing to provide a permanent and simple weigh-in-motion system. The designed PCGEs were tested through a series of tests including fatigue and dynamic tests to verify their applicability for monitoring purposes in a bridge structure. A simple beam example was presented to show the applicability of the proposed bridge bearing equipped with the PCGE for adequately measuring the traffic loads.

Keywords

piezocomposite electricity generating element / d₃₃-mode / bridge bearing / traffic monitoring

References

[1] ParkJ C, ParkJ Y, LeeY P. Modeling and characterization of piezoelectric d₃₃-mode MEMS energy harvester [J]. J Microelectromech Syst, 2010, 19: 1215-1222

[2] KimH W, PriyaS, UchinoK, NewnhamR E. Piezoelectric energy harvesting under high pre-stressed cyclic vibrations [J]. J Electroceram, 2005, 15: 27-34

[3] TienC M T, KimJ H, GooN S. Design of a piezocomposite generating element and its characteristics [J]. Transactions of the Korean Society for Mechanical Engineers-A, 2010, 34(7): 867-872

[4] HaD H, ChooJ F, KimD, GooN S. Feasibility of a multifunctional bridge bearing with built-in piezoelectric material [J]. Advances in Information Sciences and Service Sciences, 2012, 4: 142-150

[5] HowellsC A. Piezoelectric energy harvesting [J]. Energ Convers Manage, 2009, 50: 1847-1850

[6] MosesF. Weigh-in-motion system using instrumented bridges [J]. Transportation Engineering Journal (ASCE), 1979, 105: 233-249

[7] BrownA JBridge weigh-in-motion deployment opportunities in Alabama [D], 2011, USA, University of Alabama

[8] CardiniA J, DewolfJ T. Implementation of a long-term bridge weigh-in-motion system for a steel girder bridge in the interstate highway system [J]. Journal of Bridge Engineering (ASCE), 2009, 14: 418-423

[9] ZhaoJ, GooN S, HaD H. Design and performance evaluation of a d₃₃-mode piezocomposite electricity generating element [J]. Journal of Mechanical Science and Technology, 2014, 28: 15-23

[10] SodanoH R, ParkG, InmanD J. Comparison of piezoelectric energy harvesting devices for recharging batteries [J]. J Intell Mater Syst Struct, 2005, 16: 799-807

[11] AndräW, BeyerE, WintergestL. Experiments and applications of new rocker- and sliding-bearings [J]. The Civil Engineer, 196237

[12] ChooJ F, HaD H, LeeC H, JangW S. Experimental study on the optimal layering position of the piezocomposite electricity generating element built in an innovative traffic load-measuring bridge bearing [J]. Advanced Materials Research, 2013, 811: 365-369

[13] ChooJ F, HaD H, GooN S, JangW S. Preliminary test for a multi-functional bridge bearing with built-in piezoelectric material [J]. Advanced Science Letters, 2012, 19(1): 37-41

[14] HaD H, ChooJ F, LeeC H, JangW S, GooN S. Dynamic characteristics of a multi-functional bridge bearing with built-in piezocomposite element [J]. Applied Mechanics and Materials, 2013, 432: 275-280

[15] PhamV L, GooN S, ChooJ F. Effects of cyclic impacts on the performance of a piezo-composite electricity generating element in a d₃₃-mode energy harvesting [J]. J Nanoscience and Nanotechnology, 2014, 14: 7410-7418