Electrolyte composition and removal mechanism of Cu electrochemical mechanical polishing

Abstract

The optimization of electrolytes and the material removal mechanisms for Cu electrochemical mechanical planarization (ECMP) at different pH values including 5-methyl-1H-benzotriazole (TTA), hydroxyethylidenediphosphoric acid (HEDP), and tribasic ammonium citrate (TAC) were investigated by electrochemical techniques, X-ray photoelectron spectrometer (XPS) analysis, nano-scratch tests, AFM measurements, and polishing of Cu-coated blanket wafers. The experimental results show that the planarization efficiency and the surface quality after ECMP obtained in alkali-based solutions are superior to that in acidic-based solutions, especially at pH=8. The optimal electrolyte compositions (mass fraction) are 6% HEDP, 0.3% TTA and 3% TAC at pH=8. The main factor affecting the thickness of the oxide layer formed during ECMP process is the applied potential. The soft layer formation is a major mechanism for electrochemical enhanced mechanical abrasion. The surface topography evolution before and after electrochemical polishing (ECP) illustrates the mechanism of mechanical abrasion accelerating electrochemical dissolution, that is, the residual stress caused by the mechanical wear enhances the electrochemical dissolution rate. This understanding is beneficial for optimization of ECMP processes.

Keywords

electrochemical mechanical polishing / electrolyte composition / removal mechanism / 5-methyl-1H-benzotriazole / hydroxyethylidenediphosphoric acid / tribasic ammonium citrate

References

[1] DeshpandeS, KuiryS C, KlimovM, ObengY, SealS. Chemical mechanical planarization of copper: Role of oxidants and inhibitors [J]. Journal of The Electrochemical Society, 2004, 151(1): G788-G794

[2] LiuF Q, DuT B, DuboustA, TsaiS, HsuW Y. Cu planarization in electrochemical mechanical planarization [J]. Journal of The Electrochemical Society, 2006, 153(6): C377-C381

[3] LinJ Y, AlanC W. Adsorption-desorption study of benzotriazole in a phosphate-based electrolyte for Cu electrochemical mechanical planarization [J]. Electrochimica Acta, 2010, 55(7): 2325-2331

[4] HongY, RoyD, BabuS V. Ammonium dodecyl sulfate as a potential corrosion inhibitor surfactant for electrochemical mechanical planarization of copper [J]. Electrochemical and Solid-State Letters, 2005, 8(11): G297-G300

[5] LinJ Y, WestA C, WanC C. Adsorption and desorption studies of glycine and benzotriazole during Cu oxidation in a chemical mechanical polishing bath [J]. Journal of The Electrochemical Society, 2008, 155(6): H396-H400

[6] GoonetillekeP C, RoyD. Relative roles of acetic acid, dodecyl sulfate and benzotriazole in chemical mechanical and electrochemical mechanical planarization of copper [J]. Applied Surface Science, 2008, 254(9): 2696-2707

[7] StewartK L, ZhangJ, LiS T, CarterP W, GewirthA A. Anion effects on Cu-benzotriazole film formation implications for CMP [J]. Journal of The Electrochemical Society, 2007, 154(1): D57-D63

[8] LinJ Y, ChouS W. Synergic effect of benzotrizaole and chloride ion on Cu passivation in a phosphate electrochemical mechanical planarization electrolyte [J]. Electrochimica Acta, 2011, 56: 3303-3310

[9] WangK, LiY Z, KangR K, GuoD M. Generation and removal of pits during chemical mechanical polishing process for MgO single crystal substrate [J]. Applied Surface Science, 2010, 256(9): 2691-2699

[10] HuoJ, SolankiR, McandrewJ. Electrochemical polishing of copper for microelectronic applications [J]. Surface Engineering, 2003, 19(1): 11-16

[11] HuoJ, SolankiR, McandrewJ. Study of anodic layers and their effects on electropolishing of bulk and electroplated films of copper [J]. Journal of Applied Electrochemistry, 2004, 34: 305-314

[12] GaoF, LiangH. Material removal mechanisms in electrochemical-mechanical polishing of tantalum [J]. Electrochimica Acta, 2009, 54: 6808-6815

[13] ZhaiW-j, YangY-zhan. Tribo-electrochemical performance of copper ECMP in mixed phosphate electrolytes [J]. Advanced Materials Research, 2011, 314–316: 2565-2568

[14] ZhaiW-j, YangY-zhan. Screening test of phosphoric acid-bta slurries for copper ECMP based on inhibition efficiency [J]. Advanced Materials Research, 2011, 239–242: 920-923

[15] OliverW C, PharrG M. Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology [J]. Journal of Materials Research, 2004, 19: 3-20

[16] ZengF-l, LiuY-z, SunY, HuE-l, ZhouYu. Nanoindentation, nanoscratch, and nanotensile testing of poly (vinylidene fluoride)-polyhedral oligomeric silsesquioxane nanocomposites [J]. Journal of Polymer Physics, 2012, 50(23): 1597-1611

[17] AbhinavTElectrochemical mechanical planarization (ECMP) of Cu [D], 2008, New York, USA, Clarkson University

[18] SukhoonJ, SangjikL, HaedoJ. Effect of polishing pad with holes in electro-chemical mechanical planarization [J]. Microelectronic Engineering, 2008, 85(11): 2236-2242

[19] SerdarA, CyprianU, IsmailE, BulentB. Electrochemical mechanical planarization (eCMP) of copper thin films [J]. ECS Transactions, 2007, 2(6): 417-425

[20] ShattuckK G, LinJ Y, CojocaruP, WestA C. Characterization of phosphate electrolytes for use in Cu electrochemical mechanical planarization [J]. Electrochimica Acta, 2008, 53: 8211-8216

[21] PadhiD, YahalomJ, GandikotaS, DixitG. Planarization of copper thin films by electropolishing in phosphoric acid for ULSI applications [J]. Journal of The Electrochemical Society, 2003, 150(1): G10-G14

[22] AbhinavT, CraigB, IanI S, LiY Z, FrancoisD, AlexB, JamesM A. Electrolyte composition for Cu electrochemical mechanical planarization [J]. Journal of The Electrochemical Society, 2008, 155(7): H918-H922

[23] HuW, TanC-y, CuiH, LiuY, ZhengZ-qiao. Kinetics analysis of Ni-TiO₂ composite system during initial stages of electro-crystallization [J]. Journal of Central South University of Technology, 2010, 17: 460-466

[24] KumarS, BatooK M, PrakashR, ChoiH K, KooB H, SongJ I, ChungH, JeongH, LeeC G. Impedance spectroscopy study on Mn_1+xFe_2−2xTi_xO₄(0≤x≤0.5) ferrites [J]. Journal of Central South University of Technology, 2010, 17: 1133-1138

[25] AbhinavT, IanI S, LiY Z, FrancoisD, JamesM A. Cu electrochemical mechanical planarization surface quality [J]. Journal of The Electrochemical Society, 2009, 156(7): H555-H560

[26] HongY, DevarapalliV K, RoyD, BabuS V. Synergistic roles of dodecyl sulfate and benzotriazole in enhancing the efficiency of CMP of copper [J]. Journal of The Electrochemical Society, 2007, 154: H444-H453

[27] MatjazF, IngridM. Inhibition of copper corrosion by 1,2,3-benzotriazole: A review [J]. Corrosion Science, 2010, 52: 2737-2749

[28] YuH H, SuoZ. Stress-dependent surface reactions and implications for a stress measurement technique [J]. Journal of Applied Physics, 2000, 87(3): 1211-1218

[29] CheW, BastawrosA, ChandraA. Surface evolution during the chemical mechanical planarization of copper [J]. Annals of the CIRP, 2006, 55(1): 605-608

[30] KimK S, HurtadoJ A, TanH. Evolution of a surface-roughness spectrum caused by stress in nanometer-scale chemical etching [J]. Physical Review Letter, 1999, 83(19): 3872-3875