Effect of cyclic drying and wetting on engineering properties of heavy metal contaminated soils solidified/stabilized with fly ash

Fu-sheng Zha , Jing-jing Liu , Long Xu , Ke-rui Cui

Journal of Central South University ›› 2013, Vol. 20 ›› Issue (7) : 1947 -1952.

PDF
Journal of Central South University ›› 2013, Vol. 20 ›› Issue (7) : 1947 -1952. DOI: 10.1007/s11771-013-1694-5
Article

Effect of cyclic drying and wetting on engineering properties of heavy metal contaminated soils solidified/stabilized with fly ash

Author information +
History +
PDF

Abstract

Solidification/stabilization (S/S) is one of the most effective methods of dealing with heavy metal contaminated soils. The effects of cyclic wetting and drying on solidified/stabilized contaminated soils were investigated. A series of test program, unconfined compressive strength (UCS) test, TCLP leaching test and scanning electron microscopy (SEM) test, were performed on lead and zinc contaminated soils solidified/stabilized by fly ash. Test results show that UCS and the leaching characteristics of heavy metal ions of S/S contaminated soils are significantly improved with the increase of fly ash content. UCS of S/S soils firstly increases with the increase of the times of drying and wetting cycles, after reaching the peak, it decreases with it. When the pollutant content is lower (1 000 mg/kg), the TCLP concentration first slightly decreases under cyclic drying and wetting, then increases, but the change is minor. The TCLP concentration is higher under a high pollutant content of 5 000 mg/kg, and increases with the increase of the times of drying and wetting cycles. The results of scanning electron microscopy (SEM) test are consistent with UCS tests and TCLP leaching tests, which reveals the micro-mechanism of the variations of engineering properties of stabilized contaminated soils after drying and wetting cycles.

Keywords

solidification/stabilization (S/S) / heavy metal contaminated soil / drying and wetting cycles / long-term stability

Cite this article

Download citation ▾
Fu-sheng Zha, Jing-jing Liu, Long Xu, Ke-rui Cui. Effect of cyclic drying and wetting on engineering properties of heavy metal contaminated soils solidified/stabilized with fly ash. Journal of Central South University, 2013, 20(7): 1947-1952 DOI:10.1007/s11771-013-1694-5

登录浏览全文

4963

注册一个新账户 忘记密码

References

[1]

YongR NGeoenvironmental engineering: Contaminated soils, pollutant fate, and mitigation [M], 2001Boca Raton London, New York, Washington DCCRC Press

[2]

RaicevicS, Kaludierovic-radoicicT, ZouboulisA I. In situ stabilization of toxic metals in polluted soils using phosphates: Theoretical prediction and experimental verification [J]. Journal of Hazardous Materials B, 2005, 117: 41-53

[3]

YangX L, YinJ H. Slope equivalent Mohr-Coulomb strength parameters for rock masses satisfying the Hoek-Brown criterion [J]. Rock Mechanics and Rock Engineering, 2010, 43(4): 505-511

[4]

YangX L, HuangF. Collapse mechanism of shallow tunnel based on nonlinear Hoek-Brown failure criterion [J]. Tunnelling and Underground Space Technology, 2011, 26(6): 686-691

[5]

BurdenF R, ForstnerU, MckelvieI D, GuentherAEnvironmental monitoring handbook [M], 2002New YorkThe McGraw-Hill Companies

[6]

CynthiaR E, DavidA DRemediation of metals-contaminated soils and groundwater technology [D], 1997Pittsburgh, PACarnegie Mellon University

[7]

YangX L. Seismic passive pressures of earth structures by nonlinear optimization [J]. Archive of Applied Mechanics, 2011, 81(9): 1195-1202

[8]

MulliganC N, YongR N, GibbsB F. Remediation technologies for metal-contaminated soils and groundwater: An evaluation [J]. Engineering Geology, 2001, 60: 193-207

[9]

AcarY B, GaleR J. Electrokinetic remediation: Basic and technology status [J]. Journal of Hazardous Materials, 1995, 40: 117-137

[10]

DermatasD, MengX G. Utilization of fly ash for stabilization/solidification of heavy metal contaminated soils [J]. Engineering Geology, 2003, 70: 377-394

[11]

YangX L. Seismic bearing capacity of a strip footing on rock slopes [J]. Canadian Geotechnical Journal, 2009, 46(8): 943-954

[12]

YangX L, WangJ M. Ground movement prediction for tunnels using simplified procedure [J]. Tunnelling and Underground Space Technology, 2011, 26(3): 462-471

[13]

KumpieneJ, LagerkvistA, MauriceC. Stabilization of As, Cr, Cu, Pb and Zn in soil using amendments-A review [J]. Waste Management, 2008, 28: 215-225

[14]

MoonD H, WazneM, YoonI, GrubbD G. Assessment of cement kiln dust (CKD) for stabilization/solidification (S/S) of arsenic contaminated soils [J]. Journal of Hazardous Materials, 2008, 159: 512-518

[15]

MoonD H, GrubbaD G, ReillyT L. Stabilization/solidification of selenium-impacted soils using Portland cement and cement kiln dust [J]. Journal of Hazardous Materials, 2009, 168: 944-951

[16]

YoonI H, MoonD H, KimK W, LeeK Y, LeeJ H, KimM G. Mechanism for the stabilization/solidification of arsenic-contaminated soils with Portland cement and cement kiln dust [J]. Journal of Environmental Management, 2010, 91: 2322-2328

[17]

ZhaF S, LiuJ J, CuiK R, XuL. Utilization of cement for solidification/stabilization (s/s) of heavy metal contaminated soils [J]. Disaster Advances, 2012, 5(4): 1574-1577

[18]

ZhaF S, XuL, CuiK R. Strength characteristics of heavy metal contaminated stabilized/solidified by cement [J]. Rock and Soil Mechanics, 2012, 33(3): 652-656

[19]

YinC Y, MahmudH B, ShaabanM G. Stabilization/solidification of lead-contaminated soil using cement and rice husk ash [J]. Journal of Hazardous Materials, 2006, 137(3): 1758-1764

[20]

YangX L, ZouJ F. Cavity expansion analysis with non-linear failure criterion [J]. Proceedings of the Institution of Civil Engineers-Geotechnical Engineering, 2011, 164(1): 41-49

[21]

VoglarG E, LestanD. Efficiency modeling of solidification/stabilization of multi-metal contaminated industrial soil using cement and additives [J]. Journal of Hazardous Materials, 2011, 192: 753-762

[22]

SinghT S, PantK K. Solidification/stabilization of arsenic containing solid wastes using portland cement, fly ash and polymeric materials [J]. Journal of Hazardous Materials, 2006, 131(1/2/3): 29-36

[23]

MoonD H, LeeJ R, GrubbD G, ParkJ H. An assessment of Portland cement, cement kiln dust and class C fly ash for the immobilization of Zn in contaminated soils [J]. Environmental Earth Science, 2010, 61: 1745-1750

[24]

WangJ H, GaoY Q. Study on the strength degradation mechanism of cement-soils resulting from dry-wet cycles [J]. China Railway Science, 2006, 27(5): 23-27

[25]

ZhaoM L, WangJ H, LiangA H. Test study on the effect of cyclic dry-wet process on the fatigue strength of cement-soil [J]. China Railway Science, 2005, 26(2): 25-28

[26]

LiL, ZhuW, LinC, OhkiT. Study of wet and dry properties of solidified sludge [J]. Rock and Soil Mechanics, 2009, 30(10): 3001-3004

[27]

ZhangH Y, WangB, DongX L, FengL, FanZ M. Leaching properties of heavy metals in solidified sludge [J]. Science in China, 2009, 39(6): 1167-1173

[28]

ZhuW, LiL, LinC. Biochemical effects on permeability of solidified sludge [J]. Rock and Soil Mechanics, 2006, 27(6): 933-938

[29]

YuanJ X. Brief description of environmental geotechnical engineering problems [J]. Rock and Soil Mechanics, 1996, 17(2): 88-93

AI Summary AI Mindmap
PDF

166

Accesses

0

Citation

Detail

Sections
Recommended

AI思维导图

/