Influences of pre-existing fracture on ground deformation induced by normal faulting in mixed ground conditions

Abstract

Physical model tests have been conducted by various researchers to investigate fault rupture propagation and ground deformation induced by bedrock faulting. However, the effects of pre-existing fracture on ground deformation are not fully understood. In this work, six centrifuge tests are reported to investigate the influence of pre-existing fracture on ground deformation induced by normal faulting in sand, clay and nine-layered soil with interbedded sand and clay layers. Shear box tests were conducted to develop a filter paper technique, which was adopted in soil model preparation to simulate the effects of pre-existing fracture in centrifuge tests. Centrifuge test results show that ground deformation mechanism in clay, sand and nine-layered soil strata is classified as a stationary zone, a shearing zone and a rigid body zone. Inclination of the strain localization is governed by the dilatancy of soil material. Moreover, the pre-existing fracture provides a preferential path for ground deformation and results in a scarp at the ground surface in sand. On the contrary, fault ruptures are observed at the ground surface in clay and nine-layered soil strata.

Keywords

centrifuge modeling / pre-existing fracture / ground deformation / normal faulting / earthquake

References

[1] ColeD. A. J., LadeP. V.. Influence zones in alluvium over dip-slip faults [J]. Journal of Geotechnical Engineering, 1984, 110(5): 599-615

[2] StoneK. J. L., WoodD. M.. Effects of dilatancy and particle size observed in model tests on sand [J]. Soils and Foundations, 1992, 32(4): 43-57

[3] LeeJ. W., HamadaM.. An experimental study on earthquake fault rupture propagation through a sandy soil deposit [J]. Structural Engineering/Earthquake Engineering, 2005, 22(1): 1-13

[4] AnastasopoulosI., GazetasG., BransbyM. F., DaviesM. C. R., El NahasA.. Fault rupture propagation through sand: Finite-element analysis ??and validation through centrifuge experiments [J]. Journal of Geotechnical and Geoenvironmental Engineering, 2007, 133(8): 943-958

[5] AhmedW., BransbyM. F.. Interaction of shallow foundations with reverse faults [J]. Journal of Geotechnical and Geoenvironmental Engineering, 2009, 135(7): 914-924

[6] BonillaM. G.Surface faulting and related effects [M], 1970Englewood CliffsPrentice-Hall47-74

[7] BonillaM. G., LienkaemperJ. J.Factors affecting the recognition of faults exposed in exploratory trenches [M], 1991WashingtonU. S. Geological Survey

[8] SherardJ. L., CluffL. S., AllenC. R.. Potentially active faults in dam foundations [J]. Geotechnique, 1974, 24(3): 367-428

[9] WellsD. L., CoppersmithK. J.. New empirical relationships among magnitude, rupture length, rupture width, rupture area, and surface displacement [J]. Bulletin of the Seismological Society of America, 1994, 84(4): 974-1002

[10] BrayJ. D., SeedR. B., CluffL. S., SeedH. B.. Earthquake fault rupture propagation through soil [J]. Journal of Geotechnical Engineering, 1994, 120(3): 543-561

[11] RothW. H., ScottR. F., AustinI.. Centrifuge modeling of fault propagation through alluvial soils [J]. Geophysical Research Letters, 1981, 8(6): 561-564

[12] BrayJ. D., SeedR. B., SeedH. B.. 1 g small-scale modelling of saturated cohesive soils [J]. Geotechnical Testing Journal, 1993, 16(1): 46-53

[13] LadeP. V., Cole JrD. A., CummingsD.. Multiple failure surfaces over dip-slip faults [J]. Journal of Geotechnical Engineering, 1984, 110(5): 616-627

[14] HuP., CaiQ.-p., LuoG.-y., DingY.-h., NgC. W. W., HouY.-jing.. Centrifuge modeling of the influence of pre-existing fractures in multilayered soils on ground deformations [C]. Proceedings of the Fifth International Conference on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics, 2010San DiegoOmnipress

[15] PowrieW.Soil Mechanics: concepts and applications [M], 1997LondonE&F Spon67-119

[16] NgC. W. W., LiX.-s., Van LaakP. A., HouY.-jing.. Centrifuge modeling of loose fill embankment subjected to uni-axial and bi-axial earthquakes [J]. Soil Dynamics and Earthquake Engineering, 2004, 24(4): 305-318

[17] CaiQ.-p., HuP., Van LaakP., NgC. W. W., ChiuA. C. F.. Investigation of boundary conditions for simulating normal fault propagation in centrifuge [C]. Proceeding of the 4th international conference on geotechnical engineering and soil mechanics, 2010TehranMillpress614

[18] WhiteD. J., RandolphM. F., ThompsonB.. An image-based deformation measurement system for the geotechnical centrifuge [J]. Int J Physical Modelling in Geotechnics, 2005, 5(3): 1-12

[19] WhiteD. J., TakeW. A., BoltonM. D.. Soil deformation measurement using particle image velocimetry (PIV) and photogrammetry [J]. Geotechnique, 2003, 53(7): 619-631