Stability of boundary pillars in transition from open pit to underground mining

Abstract

Based on the height of back-filled materials, thickness of ore body, height of boundary pillar and dipping angle of ore body and water pressure, the safety factors of all the pillars are calculated with the limit equilibrium method. The calculation results present that the safety factors of pillars in Sections 19, 20, 24, 28 are less than 1.3, and those of unstable sections are identified preliminarily. Further, a numerical investigation in Sections 18, 20, 22, 24, 25 and 28 implemented with numerical code RFPA2D is employed to further validate the pillar performance and the stability of stopes. The numerical results show the pillars in Sections 18, 22 and 24 are stable and the designed pillar size is suitable. The width of the ore body near Section 28 averages 20 m, failure occurs in the left stope, but the boundary pillars near Section 28 maintain good performance. The pillars in Sections 20 and 25 are unstable which are mainly affected by the Faults F8 and F18. The existence of faults alters the stress distribution, failure mode and water inrush pathway. This work provides a meaningful standard for boundary pillar and stope design in a mine as it transitions from an open pit to underground.

Keywords

boundary pillar / stability / underground mining / numerical simulation / case study

References

[1] XuC. Y.Mining from open pit to underground [M], 1989WuhanWuhan University of Industry Press2-10

[2] Compilation Group of Mining Design Manual.Mining design manual (deposit exploitation volume) [M], 1987BeijingChina Architecture and Building Press112-135

[3] HoekE., BrownE. T.Underground excavations in rock. Revised 1st ed [M], 1997New York, USAChapman & Hall27-35

[4] HoekE., BrownE. T.. Empirical strength criterion of rock masses [J]. Journal of Geotechnical Engineering, 1980, 10(6): 1013-1035

[5] MartinC. D., ReadR. S., MartinoJ. B.. Observations of brittle failure around a circular test tunnel [J]. International Journal of Rock Mechanics and Mining Sciences, 1997, 34(7): 1065-1073

[6] GermanovichL. N., DyskinA. V.. Fracture mechanisms and instability of opening in compression [J]. International Journal of Rock Mechanics and Mining Science, 2000, 37: 263-284

[7] MohanG. M., SheoreyP. R., KushwahaA.. Numerical estimation of pillar strength in coal mines [J]. Int J Rock Mech Min Sci, 2001, 38: 1185-1192

[8] HajiabdolmajidV., KaiserP. K.. Brittleness of rock and stability assessment in hard rock tunneling [J]. Tunnelling and Underground Space Technology, 2003, 18: 35-48

[9] DengJ., YueZ. Q., ThamL. G., ZhuH. H.. Pillar design by combining finite element methods, neural networks and reliability: A case study of the Feng Huangshan copper mine, China [J]. Int J Rock Mech Min Sci, 2003, 40(4): 585-599

[10] LiC.. Disturbance of mining operations to a deep underground workshop [J]. Tunneling and Underground Space Technology, 2006, 21: 1-8

[11] WangS. Y., SloanS. W., ShengD. C., TangC. A.. Numerical analysis of the failure process around a circular opening in rock [J]. Computers and Geotechnics, 2012, 39: 8-16

[12] WangS. Y., SloanS. W., HuangM. L., TangC. A.. Numerical study of failure mechanism of serial and parallel rock pillar [J]. Rock Mech Rock Eng, 2011, 44(2): 179-198

[13] Qinhuangdao EngineeringResearch Institute for Metallurgical Industry.Engineering design of the mine transition from open-pit to underground mining in Shirengou iron mine [R], 2001Qinhuangdao, ChinaQinhuangdao Engineering & Research Institute for Metallurgical Industry

[14] MaT.-h., YangT.-h., ZhaoX.-d., ZhangY.-b., TangC.-a., LinPeng.. Three dimensional finite element analysis of parameters of boundary crown pillar in transition from open-pit to underground mining [J]. Metal Mine, 2006, 355: 61-64

[15] ZhaoX.-dong.. Stability analysis of insulating pillar of excavation of Chambishi copper mine in depth [J]. Chinese Journal of Rock Mechanics and Engineering, 2010, 29(S1): 2616-2622

[16] LiY.-h., NanS.-q., ZhaoX.-d., YangT.-h., TangC.-an.. Stability of boundary pillars for transition from open pit to underground mining [J]. Chinese Journal of Rock Mechanics and Engineering, 2005, 24(2): 278-283

[17] SanK., LeshchinskyD., MatsuiT.. Geosynthetic reinforced slopes: limit equilibrium and finite element analyses [J]. Soils and Foundations, 1994, 34(2): 79-85

[18] WangS. Y., LamK. C., AuS. K., TangC. A.. Analytical and numerical study on the pillar rockburst mechanism [J]. Rock Mech Rock Eng, 2006, 39: 445-467

[19] MelchersR. E.Structural reliability analysis and predictions, 19992nd ed [M]New YorkWiley79-86

[20] TangC.-a., XuX.-h., KouS., LindqvistP., LiuHy.. Numerical investigation of partical breakage as applied to mechanical crushing, Part I: single-partical breakage [J]. Int J Rock Mech Min Sci, 2001, 38: 1147-1162

[21] TangC. A.. Numerical simulation on progressive failure leading to collapse and associated seismicity [J]. International Journal of Rock Mechanics & Mining Science, 1997, 34(2): 249-262

[22] TangC. A., KaiserP. K.. Numerical simulation of cumulative damage and seismic energy release during brittle rock failure-Part I: Fundamentals [J]. International Journal of Rock Mechanics & Mining Science, 1998, 35: 113-121

[23] TangC. A., ThamL. G., LeeK. K., YangT. H., LiL. C.. Coupled analysis of flow, stress and damage (FSD) in rock failure [J]. Int J Rock Mech & Min Sci, 2002, 39: 477-489

[24] LiL. C., TangC. A., LiC. W., ZhuW. C.. Slope stability analysis by SRM-based rock failure process analysis (RFPA) [J]. Geomechanics and Geoengineering-An International Journal, 2006, 1(1): 51-62

[25] DightP. M., SnymanL. A.. Stress measurement for St Barbara mines gwalia deeps project-One of the world’s deepest underground haulage mines [J]. Mining Technology, 2010, 119(4): 246-254

[26] KaiserP. K., TangC. A.. Numerical simulation of damage accumulation and seismic energy release during brittle rock failure. Part II: Rib pillar collapse [J]. Int J Rock Mech Min Sci, 1998, 35(2): 123-134

[27] SzwedzickiT.. Pre- and post-failure ground behavior: case studies of surface crown pillar collapse [J]. International Journal of Rock Mechanics and Mining Sciences, 1999, 36: 351-359

[28] SainsburyD. P., SainsburyB. L., LorigL. J.. Investigation of caving induced subsidence at the abandoned Grace Mine [J]. Mining Technology, 2010, 119(3): 151-161