Influence of explosion parameters on wavelet packet frequency band energy distribution of blast vibration

Abstract

Blast vibration analysis is one of the important foundations for studying the control technology of blast vibration damage. According to blast vibration live data that have been collected and the characteristics of short-time non-stationary random signals, the wavelet packet energy spectrum analysis for blast vibration signal has made by wavelet packet analysis technology and the signals were measured under different explosion parameters (the maximal section dose, the distance of blast source to measuring point and the section number of millisecond detonator). The results show that more than 95% frequency band energy of the signals s1–s8 concentrates at 0–200 Hz and the main vibration frequency bands of the signals s1–s8 are 70.313–125, 46.875–93.75, 15.625–93.75, 0–62.5, 42.969–125, 15.625–82.031, 7.813–62.5 and 0–62.5 Hz. Energy distributions for different frequency bands of blast vibration signal are obtained and the characteristics of energy distributions for blast vibration signal measured under different explosion parameters are analyzed. From blast vibration signal energy, the decreasing law of blast seismic waves measured under different explosion parameters was studied and the wavelet packet analysis is an effective means for studying seismic effect induced by blast.

Keywords

blast vibration / wavelet packet analysis / explosion parameter / energy distribution

References

[1] MichelleS., HooF., SunilG. P.. Dynamic pulse buckling of composite shells subjected to external blast [J]. Composite Structures, 2010, 92(7): 1716-1727

[2] LiJ.-c., MaG.-wei.. Analysis of blast wave interaction with a rock joint [J]. Rock Mechanics and Rock Engineering, 2010, 43(6): 777-787

[3] BanasA., BanasK., BahouM., MoserH. O., WenL., YangP., LiZ. J., CholewaM., LimS. K., LimC. H.. Post-blast detection of traces of explosives by means of Fourier transform infrared spectroscopy [J]. Vibrational Spectroscopy, 2009, 51(2): 168-176

[4] RenY.-y., ZhangL., HanFeng.. Dynamic load analysis of underground structure under effect of blast wave [J]. Applied Mathematics and Mechanics, 2006, 27(9): 1281-1288

[5] AidasG.. Application of the Stockwell transform to blasting-induced ground vibration [J]. International Journal of Surface Mining, Reclamation and Environment, 2005, 19(2): 100-107

[6] ZhongG.-s., LiJ., ZhaoKui.. Structural safety criteria for blasting vibration based on wavelet packet energy spectra [J]. Mining Science and Technology, 2011, 21(1): 35-40

[7] LuW.-b., LiP., ChenM., ZhouC.-b., ShuD.-qiang.. Comparison of vibration induced by excavation of deep-buried cavern and open pit with method of bench blasting [J]. Journal of Central South University of Technology, 2011, 18(5): 1709-1718

[8] LingT.-h., LiX.-b., DaiT.-g., PengZ.-bin.. Features of energy distribution for blast vibration signals based on wavelet packet decomposition [J]. Journal of Central South University of Technology, 2005, 12(1): 135-140

[9] LingT.-h., LiX.-b., WangG.-y., ChenW.-sheng.. Influence of distance from blasting center on frequency bands energy distribution of blasting vibration signals [J]. Journal of Chongqing Jianzhu University, 2007, 29(2): 53-55

[10] ZHONG Guo-sheng. Applied fundamental research of blasting vibration analysis based on wavelet transform [D]. Changsha: Central South University, 2006: 56–58. (in Chinese)

[11] YanZ.-x., WangH.-yu.Blast seismic effect and safety [M], 2010BeijingScience Press121-123

[12] DaubechiesI.Ten lectures on wavelets [M], 1992PhiladelphiaSociety for Industrial and Applied Mathematics

[13] CharlesK.An introduction to wavelets [M], 1992New YorkAcademic Press203-206

[14] AdrianS.. Sampling of linear canonical transformed signals [J]. Signal Processing, 2006, 86(7): 1421-1425

[15] ZouY.-p., LinH., ZouX.-dong.Signals transformation and processing (Version 2) [M], 2009BeijingScience Press92-95

[16] XieJ., LiL., LiuW.-feng.. Research on wavelet base selection for vibration signal denoising [J]. Science Technology and Engineering, 2011, 11(25): 5997-6000