Acid-pickling plates and strips speed control system by microwave heating based on self-adaptive fuzzy PID algorithm

Abstract

Double self-adaptive fuzzy PID algorithm-based control strategy was proposed to construct quasi-cascade control system to control the speed of the acid-pickling process of titanium plates and strips. It is very useful in overcoming non-linear dynamic behavior, uncertain and time-varying parameters, un-modeled dynamics, and couples between the automatic turbulence control (ATC) and the automatic acid temperature control (AATC) with varying parameters during the operation process. The quasi-cascade control system of inner and outer loop self-adaptive fuzzy PID controller was built, which could effectively control the pickling speed of plates and strips. The simulated results and real application indicate that the plates and strips acid pickling speed control system has good performances of adaptively tracking the parameter variations and anti-disturbances, which ensures the match of acid pickling temperature and turbulence of flowing with acid pickling speed, improving the surface quality of plates and strips acid pickling, and energy efficiency.

Keywords

self-adaptive fuzzy PID algorithm / microwave heating / acid pickling / plates and strips / mixed-acid media

References

[1] YaoZ.-m., YuJ.-d., HuangF.-y.-zhi.. Choice and application of pickling and rolling line for cold-rolled strip steel [J]. Henan Metallurgy, 2007, 152: 11-14

[2] MagdalenaR. R.. A review on methods of regeneration of spent pickling solutions from steel processing [J]. Journal of Hazardous Materials, 2010, 177(1): 57-69

[3] DingZ.-y., JinZ.-yong.. Analysis and optimization of turbulence pickling technology for cold rolling [J]. Angang Technology, 2008, 351(3): 42-45

[4] AmalK. E. S., NabilA. M., NeveenA. M., SawsanH.. Interventional environmental study and health survey in metal pickling process [J]. Toxicology Letters, 2006, 164: 1-324

[5] WuY.-j., LiuB.-y., LiuC.-qing.. The process and main equipment characteristics of continuous pickling line [J]. Metallurgical Equipment, 2005, 152(4): 58-61

[6] KladnigW. F.. New development of acid regeneration in steel pickling plants [J]. Journal of Iron and Steel Research, International, 2008, 15(4): 1-6

[7] MaoH.-biao.. Based on information of control of automatic control system for pickling line [J]. Coal Technology, 2009, 28(9): 162-163

[8] WachiraD., PiyanuchT., AmornchaiA., PaisanK., MohamedA. H.. Neural network inverse model-based controller for the control of a steel pickling process [J]. Computers & Chemical Engineering, 2005, 29(10): 2110-2119

[9] PaisanK., PiyanuchT., HussainM. A., WachiraD.. Neural network based model predictive control for a steel pickling process [J]. Journal of Process Control, 2009, 19(4): 579-590

[10] YeC.-j., PanH.-liang.. Numerical simulation and parameter analysis of turbulent pickling tank by fluent [J]. Journal of Nanjing University of Technology: Natural Science Edition, 2009, 31(5): 34-41

[11] ZhouZ.-h., YangJie.. Characteristic of push-pull pickling line and its technical development [J]. Wisco Technology, 2010, 48(2): 49-52

[12] ChenL.-g., HuangWei.Cold-rolled steel sheet pickling process and equipment [M], 2005BeijingThe Metallurgical Industry Press77-83

[13] ZhuJ., KuznetsovA. V., SandeepK. P.. Mathematical modeling of continuous flow microwave heating of liquids (effects of dielectric properties and design parameters) [J]. International Journal of Thermal Sciences, 2007, 46(4): 328-341

[14] WangS.-lin.The application of microwave heating technology -Dry and sterilization [M], 2003BeijingMachinery Industry Press1-5

[15] TongS.-c., HeX.-l., LiY.-ming.. Adaptive fuzzy backstepping robust control for uncertain nonlinear systems based on small-gain approach [J]. Fuzzy Sets and Systems, 2010, 161(6): 771-796

[16] SoyguderS., KarakoseM., HasanA.. Design and simulation of self-tuning PID-type fuzzy adaptive control for an expert HVAC system [J]. Expert Systems with Application, 2009, 36(3): 4566-4573

[17] KaramM. E., JiaoZ.-x., ZhangH.-qing.. PID controller optimization by GA and its performances on the electro-hydraulic servo control system [J]. Chinese Journal of Aeronautics, 2008, 21(4): 378-384

[18] RongH.-g., ZhengH., LiZ.-q., XiaY.-xiang.. Tuning of fuzzy PID controller for Smith predictor [J]. Journal of Central South University of Technology, 2010, 17(3): 566-571

[19] ChengY., ZhuangC., AnX.-nan.. A general fuzzy logic controller and its application [J]. Acta Automatica Sinica, 1992, 18(6): 647-654

[20] PrecupR. E., HellendoornH.. A survey on industrial applications of fuzzy control [J]. Computers in Industry, 2011, 62(3): 213-226

[21] PhanP. A., GaleT. J.. Direct adaptive fuzzy control with a self-structuring algorithm [J]. Fuzzy Sets and Systems, 2008, 159(8): 871-899