Bearing capacity and settlement of strip footing on geosynthetic reinforced clayey slopes

Abstract

The effect of geosynthetic reinforcing on bearing capacity of a strip footing resting on georeinforced clayey slopes was investigated. The results of a series of numerical study using finite element analyses on strip footing upon both reinforced and unreinforced clayey slopes were presented. The objectives of this work are to: 1) determine the influence of reinforcement on the bearing-capacity of the strip footings adjacent slopes, 2) suggest an optimum number of reinforcement and 3) survey the effect of friction angle in clayey soils reinforced by geogrids. The investigations were carried out by varying the edge distance of the footing from slope. Also different numbers of geosynthetic layers were applied to obtaining the maximum bearing capacity and minimum settlement. To achieve the third objective, two different friction angles were used. The results show that the load-settlement behavior and ultimate bearing capacity of footing can be considerably improved by the inclusion of reinforcing layer. But using more than one layer reinforcement, the ultimate bearing capacity does not change considerably. It is also shown that for both reinforced and unreinforced slopes, the bearing capacity increases with an increase in edge distance. In addition, as the soil friction angle is increased, the efficiency of reinforcing reduces.

Keywords

geosynthetic reinforcing / numerical analysis / bearing capacity / strip footing / clayey slope / friction angle

References

[1] ShieldsD. H., ScottJ. D., BauerG. E., DeschenesJ. H., BarsvaryY.. Bearing capacity of foundation near slopes [C]. Proceedings of the 9th International Conference on Soil Mechanics and Foundation Engineering. Tokyo, 1977, 2: 715-720

[2] HansenB.. A revised and extended formula for bearing capacity [R]. Copenhagen: Danish Geotechnical Institute Bui, 1970, 28: 5-11

[3] VesicA. S.. Analysis of ultimate loads of shallow foundations [J]. JSMFD, ASCE, 1973, 99(SMI): 45-73

[4] BowlesJ.Foundation analysis and design, 19965th Ed.New YorkMcGraw-Hill

[5] CastelliF., MottaE.. Bearing capacity of strip footings near slopes [J]. Journal of Geotechnical and Geological Engineering, 2010, 28(2): 187-198

[6] KumarA., OhriM. L., BansalR. K.. Bearing capacity tests of strip footings on reinforced layered soil [J]. Journal of Geotechnical and Geological Engineering, 2007, 25(2): 139-150

[7] YangX.-l., WangZ.-b., Zou, LiLiang.. Bearing capacity of foundation on slope determined by energy dissipation method and model experiments [J]. Journal of Central South University of Technology, 2007, 14(1): 125-128

[8] LathaG. M., SomwanshiA.. Bearing capacity of square footings on geosynthetic reinforced sand [J]. Geotextiles and Geomembranes, 2009, 27(4): 281-294

[9] ChoS. D., HamT. G., YangK. S., YouS. K.. An experimental study on the effect of reinforcing materials for the stabilization of soft ground [J]. Geosynthetics in Civil and Environmental Engineering, 2009, 4: 281-285

[10] LathaG. M., DashS. K., RajagopalK.. Equivalent continuum simulations of geocell reinforced sand beds supporting strip footings [J]. Geotechnical and Geological Engineering, 2008, 26(4): 387-398

[11] OtaniJ., OchiaiH., YamamotoK.. Bearing capacity analysis of reinforced foundation on cohesive soil [J]. Geotextiles and Geomembranes, 1998, 16: 195-206

[12] ThallakS. G., SarideS., KumarS. D.. Performance of surface footing on geocell-reinforced soft clay beds [J]. Geotechnical and Geological Engineering, 2007, 25(5): 509-524

[13] EstabraghA. R., BordbarA. T., JavadiA. A.. Mechanical behavior of a clay soid reinforced with nylon fibers [J]. Geotechnical and Geological Engineering, 2011, 29(5): 899-908

[14] ParkH. I., LeeS. R.. Evaluation of bearing capacity for multi-layered clay deposits with geosynthetic reinforcement using discrete element method [J]. Marine Georesources and Geotechnology, 2010, 28(4): 363-374

[15] BOUSHEHRIAN A H, HATAF N. Bearing capacity of ring footings on reinforced clay [J]. Geosynthetics in Civil and Environmental Engineering, 2009(4): 328–331.

[16] WeiL. M., NiuJ. D., HuoH. J.. Effect of reinforced sand cushion on the limit fill height of embankment on soft clay foundation [J]. Geosynthetics in Civil and Environmental Engineering, 2009, 4: 261-265

[17] SireeshS., SitharamT. G., DashS. K.. Bearing capacity of circular footing on geocell-sand mattress overlying clay bed with void [J]. Geotextiles and Geomembranes, 2009, 27(2): 89-98

[18] AlamshahiS., HatafN.. Bearing capacity of strip footings on sand slopes reinforced with geogrid and grid-anchor [J]. Geotextiles and Geomembranes, 2009, 27(3): 217-226

[19] AbdrabboF., GaaverK. H., OmerE. A.. Behavior of strip footings on reinforced and unreinforced sand slope [C]. Proceeding of Geocongress 2008: Geosustainability and Geohazard Mitigation (GSP 178), 2008OrleansASCE25-32

[20] BAHLOUL K H M M. Behavior of strip footing resting on randomly fiber reinforced sand cushion underlined by a layer of soft clay and adjacent to a slope [C]// Proceedings of 11th International Colloquium on Structural and Geotechnical Engineering. Cairo, Egypt, 2005: 1–12.

[21] SawwafM. E.. Behavior of strip footing on geogrid-reinforced sand over a soft clay slope [J]. Geotextiles and Geomembranes, 2007, 25(1): 50-60

[22] YetimogluT., InanirM., InanirO. E.. A study on bearing capacity of randomly distributed fiber-reinforced sand fills overlying soft clay [J]. Geotextiles and Geomembranes, 2005, 23(2): 174-183

[23] KoatakeN., TanakaT., TatsuokaF., YamauchiH.. Numerical simulation of strain localization and failure in reinforced sand [C]. Proceedings of the International Symposium on Deformation and Progressive Failure, 1977IS NagoyaPergamon247-252

[24] MoaveniS.Finite element analysis theory and application with ANSYS [M], 1999New JerseyPrentice-Hall, Englewood Cliffs

[25] TerzaghiK.Theoretical soil mechanics [M], 1943New YorkWiley & Sons

[26] MeyerhofG. G.. The ultimate bearing capacity of foundation [J]. Geotechnique, 1951, 2(4): 301-311