Influence of cerium on microstructures and mechanical properties of Al-Zn-Mg-Cu alloys

Abstract

Effect of element cerium (Ce) on microstructure and mechanical properties of Al-Zn-Mg-Cu alloys has been investigated by transmission electron microscopy (TEM), scanning electron microscopy (SEM), differential scanning calorimetry (DSC) and hardness test. The results show that addition of Ce can remarkably refine the as-cast grains and eutectic microstructure. A transformation from Mg(Zn,Cu,Al)₂ phase to Al₂CuMg phase is observed during homogenization. Furthermore, the Ce addition introduces changes in the precipitation process and consequently in the age-hardening behavior of the alloy. Microstructural measurements reveal that the addition of Ce promotes the precipitation of η′ phase, but it also partly retards the precipitation of GP zones. The density of precipitates decreases in a certain degree and rod-like η′ precipitates increase when Ce content is from 0.2% to 0.4% (mass fraction).

Keywords

Al-Zn-Mg-Cu alloy / cerium / microstructure / homogenization / precipitation

References

[1] HeinzA., HaszlerA., KeidelC., MoldenhauerS., BenedictusR.. Recent development in aluminum alloys for aerospace applications [J]. Materials Science and Engineering A, 2000, 280: 102-107

[2] WilliamsJ. C., StarkeE. J. A.. Progress in structural materials for aerospace systems [J]. Acta Mater, 2003, 51(19): 5775-5799

[3] SenatoravaO. G., UksusnikovA. N., LeqoshinaS. F., FridlyanderI. N., ZhenqinaI. P.. Influence of different minor additions on structure and properties of high-strength Al-Zn-Mg-Cu alloy sheets [J]. Materials Science Forum, 2000, 331: 1249-1254

[4] SenkovO. N., BhatR. B., SenkovaS. V., SchlozJ. D.. Microstructure and properties of cast ingots of Al-Zn-Mg-Cu alloys modified with Sc and Zr [J]. Metallurgical and Materials Transactions A, 2005, 36(8): 2115-2126

[5] SenkovO. N., ShagievM. R., SenkovaS. V., MiracleD. B.. Precipitation of Al₃(Sc,Zr) particles in an Al-Zn-Mg-Cu-Sc-Zr alloy during conventional solution heat treatment and its effect on tensile properties [J]. Acta Materialia, 2008, 56(15): 3723-3738

[6] ZhangM.-g., ChangZ.-l., YanJ.-m., HaoJ.-zhi.. Investigation of the behaviour of rare earth element cerium in aluminum-lithium alloys by the method of internal friction [J]. Journal of Materials Processing Technology, 2001, 115(3): 294-297

[7] GovindarajuH. K., JayarajT., SadanandaraoP. R., VenkateshaC. S.. Evaluation of mechanical properties of as-cast Al-Zn-Ce alloy [J]. Materials and Design, 2010, 31(1): S24-S29

[8] XiaoD. H., WangJ. N., DingD. Y., YangH. L.. Effect of rare earth Ce addition on the microstructure and mechanical properties of an Al-Cu-Mg-Ag alloy [J]. Journal of Alloys and Compounds, 2003, 352(1/2): 84-88

[9] SongM., ChenK.-h., HuangL.-ping.. Effect of Ce and Ti on the microstructures and mechanical properties of an Al-Cu-Mg-Ag alloy [J]. Rare Metals, 2007, 26: 28-32

[10] WangW.-t., ZhangX.-m., GaoZ.-g., JiaY.-z., YeL.-y., ZhengD.-w., LiuLing.. Influences of Ce addition on the microstructures and mechanical properties of 2519A aluminum alloy plate [J]. Journal of Alloys and Compounds, 2010, 491(1/2): 366-371

[11] ChaubeyA. K., MohapatraS., JayasankarK., PradhanS. K., SatpatiB., SahayS. S., MishraB. K., MukherjeeP. S.. Effect of cerium addition on microstructure and mechanical properties of Al-Zn-Mg-Cu alloy [J]. Transactions of The Indian Institute of Metals, 2009, 62(6): 539-543

[12] MondalC., MukhopadhyayA. K.. On the nature of T(Al₂MgZn₃) and S(Al2CuMg) phases present in as-cast and annealed 7055 aluminum alloy [J]. Materials Science and Engineering A, 2005, 391(1/2): 367-376

[13] FanX.-g., JiangD.-m., MengQ.-c., ZhongLi.. Microstructural evolution of an Al-Zn-Mg-Cu alloy during homogenization [J]. Materials Letters, 2006, 60(12): 1475-1479

[14] DeschampsA., LivetF., BrechetY.. Influence of predeformation on aging in an Al-Zn-Mg alloy: I. Microstruture evolution and mechanical properties [J]. Acta Mater, 1999, 47(1): 281-292

[15] JiangX. J., NobleB., HansenV., TaftoJ.. Influence of zirconium and copper on the early stages of aging in Al-Zn-Mg alloys [J]. Metallurgical and Materials Transactions A, 2001, 32(5): 1063-1073

[16] BuhaJ., LumelyR. N., CroskyA. G.. Secondary ageing in an aluminum alloy 7050 [J]. Materials Science and Engineering A, 2008, 492(1/2): 1-10

[17] ShaG., CerezoA.. Early-stage precipitation in Al-Zn-Mg-Cu alloy [J]. Acta Materialia, 2004, 52(15): 4503-4516

[18] ChenJ.-z., ZhenL., YangS.-j., ShaoW.-z., DaiS.-long.. Investigation of precipitation behavior and related hardening in AA7055 aluminum alloy [J]. Materials Science and Engineering A, 2009, 500(1/2): 34-42

[19] RamanK. S., DasE. S. S., VasuK. I.. Values of solute-vacancy energy in aluminum matrix for Ag, Be, Ce, Dy, Fe, Li, Mn, Nb, Pt, Sb, Si, Y and Yb [J]. Scripta Metallurgica, 1970, 4(4): 291-293

[20] EmburyJ. D., NicholsonR. B.. The nucleation of precipitates: The system Al-Zn-Mg [J]. Acta Metallurgica, 1965, 13(4): 403-417