Fluid flow and heat transfer characteristics of spiral coiled tube: Effects of Reynolds number and curvature ratio

Abstract

Numerical analysis was performed to investigate flow and heat transfer characteristics in spiral coiled tube heat exchanger. Radius of curvature of the spiral coiled tube was gradually increased as total rotating angle reached 12π. As the varying radius of curvature became a dominant flow parameter, three-dimensional flow analysis was performed to this flow together with different Reynolds numbers while constant wall heat flux condition was set in thermal field. From the analysis, centrifugal force due to curvature effect is found to have significant role in behavior of pressure drop and heat transfer. The centrifugal force enhances pressure drop and heat transfer to have generally higher values in the spiral coiled tube than those in the straight tube. Even then, friction factor and Nusselt number are found to follow the proportionality with square root of the Dean number. Individual effect of flow parameters of Reynolds number and curvature ratio was investigated and effect of Reynolds number is found to be stronger than that of curvature effect.

Keywords

spiral coiled tube heat exchanger / Reynolds number / curvature ratio / secondary flow / friction factor / Nusselt number

References

[1] DeanW. R.. Note on the motion of fluid in a curved pipe [J]. Philosophical Magazine, 1927, 4: 208-223

[2] JanssenL. A. M., HoogendoornC. J.. Laminar convective heat transfer in helical coiled tubes [J]. International Journal of Heat and Mass Transfer, 1978, 21: 1197-1206

[3] PrasadB. V. S. S. S., DasD. H., PrabhakarA. K.. Pressure drop, heat transfer and performance of a helically coiled tubular exchanger [J]. Heat Recovery Systems and CHP, 1989, 9: 249-256

[4] AliS.. Pressure drop correlations for flow through regular helical coil tubes [J]. Fluid Dynamics Research, 2001, 28: 295-310

[5] PrabhanjanD. G., RagbavanG. S. V., RennieT. J.. Comparison of heat transfer rates between a straight tube heat exchanger and a helically coiled heat exchanger [J]. International Communications in Heat and Mass Transfer, 2002, 29: 185-191

[6] RoseJ. W.. Heat-transfer coefficients Wilson plot and accuracy of thermal measurements [J]. Experimental Thermal and Fluid Science, 2004, 28: 77-86

[7] NaphonP.. Thermal performance and pressure drop of the helical-coil heat exchangers with and without helically crimped fins [J]. International Communications in Heat and Mass Transfer, 2007, 34: 321-330

[8] NaphonP., WongwisesS.. A review of flow and heat transfer characteristics in curved tubes [J]. Renewable and Sustainable Energy Reviews, 2006, 10: 463-490

[9] ShokouhmandH., SalimpourM. R., AkhavanbehabadiM. A.. Experimental investigation of shell and coiled tube heat exchangers using Wilson plots [J]. International Communications in Heat and Mass Transfer, 2008, 35: 84-92

[10] SantiniL., CioncoliniA., LombardiC., RicottiM.. Two-phase pressure drops in a helically coiled steam generator [J]. International Journal of Heat and Mass Transfer, 2008, 51: 4926-4939

[11] JayakumarJ. S., MahajaniS. M., MandalJ. C., VijayanP. K., BhoiR.. Experimental and CFD estimation of heat transfer in helically coiled heat exchangers [J]. Chemical Engineering Research and Design, 2008, 86: 221-232

[12] GhorbaniN., Hessam TaherianH., GorjiM., MirgolbabaeiH.. An experimental study of thermal performance of shell-and-coil heat exchangers [J]. International Communications in Heat and Mass Transfer, 2010, 37: 775-781

[13] NAPHON P, WONGWISES S. Experimental and theoretical investigation of the heat transfer characteristics and performance of a spiral-coil heat exchanger under dry-surface conditions [C]// Proceedings of 2nd International Conference on Heat Transfer, Fluid Mechanics, and Thermodynamics. Victoria Falls, Zambia, 2003: 24-26.

[14] NaphonP., SuwagraiJ.. Effect of curvature ratios on the heat transfer and flow developments in the horizontal spirally coiled tubes [J]. International Journal of Heat and Mass Transfer, 2007, 50: 444-451

[15] NaphonP.. Study on the heat transfer and flow characteristics in a spiral-coil tube [J]. International Communications in Heat and Mass Transfer, 2011, 38: 69-74

[16] DravidA. N., SmithK. A., MerrillE., BrianP. L. T.. Effect of secondary fluid on laminar flow heat transfer in helically coiled tubes [J]. AIChE Journal, 1971, 17: 1114-1122

[17] PartankarS. V.Numerical heat transfer and fluid flow [M], 1980, New York, McGraw_Hill: 1-78

[18] CFX v12 Solver theory guide [M]. Southpoint: ANSYS Inc, Southpoint, 2009: 1–169.

[19] OlsonD. E., SynderB.. The upstream scale of flow development in curved circular pipes [J]. Journal of Fluid Mechanics, 1985, 150: 139-158