Properties and mechanism of red mud in preparation of ultra-lightweight sludge-red mud ceramics

Abstract

New ultra-lightweight sludge-red mud ceramics (ULS-RMC) were prepared by red mud (RM), clay and dried sewage sludge (DSS). The properties and mechanism of RM in the preparation of ULS-RMC were discussed. The chemical components, thermal properties and mineral phases of RM were determined by energy dispersive X-ray (EDX), differential scanning calorimetry/thermal gravimetric analysis (DSC/TGA) and X-ray diffraction (XRD), respectively. Constant dosage of DSS to clay and different amounts of RM were utilized in the preparation of ULS-RMC. Physical properties test (bulk density, grain density, water absorption and expansion ratio), XRD and scanning electron microscopy (SEM) were employed to characterize the ULS-RMC. The results show that RM exhibits high hydroscopic property and good water-retention property, and bloating property and fluxing property of RM are caused by abound of gaseous components and flux, respectively. The two chemical properties are utilized to discuss the mineral phases and microstructures differences between ULSC and ULS-RMC.

Keywords

ultra-lightweight ceramic / red mud / sludge / bloating mechanism

References

[1] Ministry of Environmental Protection of the People’s Republic of China. Solid waste. http://www.sepa.gov.cn/cont/gthw/

[2] Ministry of Environmental Protection of the People’s Republic of China. Pollution control. http://www.sepa.gov.cn/cont/index.htm

[3] LucieH., JaroslavB., VladimirU., ThomasE.. Thermal processing of sewage sludge (II) [J]. Appl Therm Eng, 2008, 28(16): 2083-2088

[4] LuostarinenS., LusteS., SillanpaaM.. Increased biogas production at wastewater treatment plants through co-digestion of sewage sludge with grease trap sludge from a meat processing plant [J]. Bioresource Technology, 2009, 100(1): 79-85

[5] LiangM. S., XuQ.. Research on high temperature compost technology in sludge processing [C]. Proceedings of the 2nd International Conference on Bioinformatics and Biomedical Engineering, 2008, Shanghai, Shanghai Jiaotong University: 4202-4205

[6] RoyB.. Sludge processing [J]. Pollut Eng, 2005, 37: 20-23

[7] PattersonD. A., StemarkL., HoganF.. Pilot-scale supercritical water oxidation of sewage sludge [C]. Proceedings of the 6th European Biosolids and Organic Residuals Conference, 2001, Wakefield, Aqua. Environ. Consultancy Services: 11-15

[8] RozadaF., OteroM., MoránA.. Activated carbons from sewage sludge and discarded tyre: Production and optimization [J]. J Hazard Mater, 2005, 124(1/2/3): 181-191

[9] YangJ. K., ZhangD. D., HouJ., HeB. P., XiaoB.. Preparation of glass-ceramics from red mud in the aluminium industries [J]. Ceram Int, 2008, 34(1): 125-130

[10] PerezR. G. A., GuitianR. F., de Aza PendasS.. Industrial obtaining of ceramic materials from the Bayer process red mud’s [J]. Bol Soc Esp Ceram, 1999, 38: 220-226

[11] BottR., LangelohT., HahnJ.. Re-usage of dry bauxite residue [C]. Proceedings of the 7th International Alumina Quality Workshop, 2005, Perth Australia, AQW: 236-241

[12] ParamguruR. K., RathP. C., MisraV. N.. Trends in red mud utilization-A review [J]. Miner Process Extr M, 2005, 26(1): 1-29

[13] HanS. X., YueQ. Y., YueM., GaoB. Y., ZhaoY. Q., ChenW. J.. Effect of sludge-fly ash ceramic particles (SFCP) on synthetic wastewater treatment in an A/O combined biological aerated filter [J]. Bioresource Technology, 2009, 100(3): 1149-1155

[14] ZhaOY. Q., YueQ. Y., LiR. B., YueM., HanS. X., GaoB. Y., LiQ., YuH.. Research on sludge-fly ash ceramic particles (SFCP) for synthetic and municipal wastewater treatment in biological aerated filter (BAF) [J]. Bioresource Technology, 2009, 100(21): 4955-4962

[15] YueQ. Y., HanS. X., YueM., GaoB. Y., LiQ., YuH., ZhaoY. Q., QiY. F.. The performance of biological anaerobic filters packed with sludge-fly ash ceramic particles (SFCP) and commercial ceramic particles (CCP) during the restart period: Effect of the C/N ratios and filter media [J]. Bioresource Technology, 2009, 100(21): 5016-5020

[16] HanS. X., YueQ. Y., YueM., GaoB. Y., LiQ., YuH., ZhaoY. Q., QiY. F.. The characteristics and application of sludge-fly ash ceramic particles (SFCP) as novel filter media [J]. J Hazard Mater, 2009, 171(1/2/3): 809-814

[17] QiY. F., YueQ. Y., HanS. X., YueM., GaoB. Y., ShaoH. Y. T.. Preparation and mechanism of ultra-lightweight ceramics produced from sewage sludge [J]. J Hazard Mater, 2010, 176(1/2/3): 76-84

[18] MerinoI., ArevaloL. F., RomeroF.. Characterization and possible uses of ashes from wastewater treatment plants [J]. Waste Manage, 2005, 25(10): 1046-1054

[19] MerinoI., ArevaloL. F., RomeroF.. Preparation and characterization of ceramic products by thermal treatment of sewage sludge ashes mixed with different additives [J]. Waste Manage, 2007, 27(12): 1829-1844

[20] CheesemanC. R., VirdG. S.. Properties and microstructure of lightweight aggregate produced from sintered sewage sludge ash [J]. Resour Conserv Recy, 2005, 45(1): 18-30

[21] WangX. R., JinY. Y., WangZ. Y., MaharR. B., NieY. F.. A research on sintering characteristics and mechanisms of dried sewage sludge [J]. J Hazard Mater, 2008, 160(2/3): 489-494

[22] MunK. J.. Development and tests of lightweight aggregate using sewage sludge for nonstructural concrete [J]. Constr Build Mater, 2007, 21(7): 1583-1588

[23] SglavoV. M., MaurinaS., ConciA., SalviatiA., CarturanG., CoccoG.. Bauxite’ red mud’ in the ceramic industry: Part 2. Production of clay-based ceramics [J]. J Eur Ceram Soc, 2000, 20(3): 245-252

[24] SglavoV. M., MaurinaS., ConciA., SalviatiA., CarturanG., CoccoG.. Bauxite’ red mud’ in the ceramic industry: Part 1. Thermal behaviour [J]. J Eur Ceram Soc, 2000, 20(3): 235-244

[25] SrikanthS., RayA. K., BandopadhyayA., RavikumarB., AnimeshJ.. Phase constitution during sintering of red mud and red mud-fly ash mixtures [J]. J Am Ceram Soc, 2005, 88(9): 2396-2401

[26] PontikesY., RathossiC., NikolopoulosP., AngelopoulosG. N., JayaseelanD. D., LeeW. E.. Effect of firing temperature and atmosphere on sintering of ceramics made from Bayer process bauxite residue [J]. Ceram Int, 2009, 35(1): 401-407

[27] TsaiC. C., WangK. S., ChiouI. J.. Effect of SiO₂-Al₂>O₃-flux ratio change on the bloating characteristics of lightweight aggregate material produced from recycled sewage sludge [J]. J Hazard Mater, 2006, 134(1/2/3): 87-93

[28] DucmanV., MirticB.. The applicability of different waste materials for the production of lightweight aggregates [J]. Waste Manage, 2009, 29(8): 2361-2368