Influence of zinc on electrochemical discharge activity of Mg-6%Al-5%Pb anode

Nai-guang Wang , Ri-chu Wang , Chao-qun Peng , Yan Feng

Journal of Central South University ›› 2012, Vol. 19 ›› Issue (1) : 9 -16.

PDF
Journal of Central South University ›› 2012, Vol. 19 ›› Issue (1) : 9 -16. DOI: 10.1007/s11771-012-0965-x
Article

Influence of zinc on electrochemical discharge activity of Mg-6%Al-5%Pb anode

Author information +
History +
PDF

Abstract

Mg-6%Al-5%Pb (mass fraction) anodes with different contents of zinc were prepared by melting and casting. The electrochemical discharge behavior of these anodes in 3.5% NaCl solutions was investigated by galvanostatic test and electrochemical impedance spectroscopy (EIS). The microstructures and the corroded surfaces of these anodes were studied by scanning electron microscopy (SEM) and emission spectrum analysis (ESA). The phase structures and the corrosion products of the anodes were analyzed by X-ray diffraction (XRD). The results show that zinc promotes the grain refinement of Mg-6%Al-5%Pb anode and makes the average discharge potential of Mg-6%Al-5%Pb anode more negative during galvanostatic test. Mg-6%Al-5%Pb anode with the addition of 1% (mass fraction) zinc has the best electrochemical performance. The activation mechanism of zinc to Mg-6%Al-5%Pb anode is as follows: The hydrolyzation of dissolved Zn2+ ions reduces the pH value of the solution near the surface of the anode and accelerates the dissolution of Mg(OH)2 film; The precipitated Zn(OH)2 with similar structure as Mg(OH)2 combines with Mg(OH)2 film easily and makes it break down.

Keywords

magnesium anode / alloying / electrochemistry / electrochemical discharge activity

Cite this article

Download citation ▾
Nai-guang Wang, Ri-chu Wang, Chao-qun Peng, Yan Feng. Influence of zinc on electrochemical discharge activity of Mg-6%Al-5%Pb anode. Journal of Central South University, 2012, 19(1): 9-16 DOI:10.1007/s11771-012-0965-x

登录浏览全文

4963

注册一个新账户 忘记密码

References

[1]

RenukaR.. Influence of allotropic modifications of surphur on the cell voltage in Mg-CuI(S) seawater activated batter [J]. Materials Chemistry and Physics, 1999, 59(1): 42-48

[2]

FengY., WangR.-c., YuK., PengC.-q., LiW.-xian.. Influence of Ga and Hg on microstructure and electrochemical corrosion behavior of Mg alloy anode materials [J]. Transactions of Nonferrous Metals Society of China, 2007, 17: 1363-1366

[3]

RenukA. R.. AgCl and Ag2S as additives to CuI in Mg-CuI seawater activated batteries [J]. Journal of Applied Electrochemistry, 1997, 27(12): 1394-1397

[4]

CaoD.-x., WuL., WangG.-l., LuY.-zhou.. Electrochemical oxidation behavior of Mg-Li-Al-Ce-Zn and Mg-Li-Al-Ce-Zn-Mn in sodium chloride solution [J]. Journal of Power Sources, 2008, 183: 799-804

[5]

FengY., WangR.-c., PengC.-q., WangN.-guang.. Influence of Mg21Ga5Hg3 compound on electrochemical properties of Mg-5%Hg-5%Ga alloy [J]. Transactions of Nonferrous Metals Society of China, 2009, 19: 154-159

[6]

FiraS. S., KiblL., LiwL. W.. Water-activated disposable and long shelf-life microbatteries [J]. Sensors and Actuators A, 2004, 111: 79-86

[7]

VenkatesaraR. K.. Performance evaluation of Mg-AgCl batteries for under water propulsion [J]. Defense Science Journal, 2001, 5(2): 161-170

[8]

FidelG. M., JuanM. F., RubenD. R., GenescaJ.. Electrochemical study on magnesium anodes in NaCl and CaSO4-Mg(OH)2 aqueous solutions [J]. Electrochimic Acta, 2006, 51: 1820-1830

[9]

UdhayanR., BhattD. P.. On the corrosion behavior of magnesium and its alloys using electrochemical techniques [J]. Journal of Power Sources, 1996, 63: 103-107

[10]

WangN.-g., WangR.-c., PengC.-q., FengY., ZhangX.-yu.. Influence of aluminium and lead on activation of magnesium as anode [J]. Transactions of Nonferrous Metals Society of China, 2010, 20: 1403-1411

[11]

BalasubramanianR., VeluchamyA., VenkatakrishnanN., GangadharanR.. Electrochemical characterization of magnesium/silver chloride battery [J]. Journal of Power Sources, 1995, 56: 197-199

[12]

TamarY., MandlerD.. Corrosion inhibition of magnesium by combined zirconia silica sol-gel films [J]. Electrochimica Acta, 2008, 53: 5118-5127

[13]

ZhaoM.-c., LiuM., SongG.-l., AtrensA.. Influence of pH and chloride ion concentration on the corrosion of Mg alloy ZE41 [J]. Corrosion Science, 2008, 50: 3168-3178

[14]

HiromotoS., YamamotoA., MaruyamaN., SomekawaH., MukaiT.. Influence of pH and flow on the polarization behaviour of pure magnesium in borate buffer solutions [J]. Corrosion Science, 2008, 50: 3561-3568

[15]

ZhaoM.-c., SchmutzP., BrunnerS., LiuM., SongG.-l., AtrensA.. An exploratory study of the corrosion of Mg alloys during interrupted salt spray testing [J]. Corrosion Science, 2009, 51: 1277-1292

[16]

SongY. W., ShanD. Y., HanE. H.. Corrosion behaviors of electroless plating Ni-P coatings deposited on magnesium alloys in artificial sweat solution [J]. Electrochimica Acta, 2007, 53: 2009-2015

[17]

CaoC.-nan.Principles of electrochemistry of corrosion [M], 2008, Beijing, Chemical Industry Press

AI Summary AI Mindmap
PDF

91

Accesses

0

Citation

Detail

Sections
Recommended

AI思维导图

/