A novel experimental system for performance evaluation of water powered percussive rock drill

Abstract

A set of water powered excavation test system was developed for the comprehensive performance testing and evaluation of water powered percussive rock drill indoors. The whole system contains hydraulic power section, electronic control system, test and data acquisition system, and assistant devices, such as guideway and drilling bench. Parameters of the water powered percussive rock drill can be obtained by analyzing testing data, which contain impact energy, front and back cavity pressure, pressure and flow in each working part, drilling velocity, frequency and energy efficiency etc. The system is applied to test the self-designed water powered percussive rock drill SYYG65. The parameters of water powered percussive rock drill with impact pressure of about 8.9 MPa are 58.93 J for impact energy, and 8.97% for energy efficiency, which prove the effectiveness of system.

Keywords

water powered percussive rock drill / performance test / water powered excavation / comprehensive evaluation

References

[1] ParaszczakJ., PlanetaS., OuelletH.. Comparative testing of water-powered and pneumatic jackleg rock drill [C]. SME Transactions Volume 296, 1995, California USA, University of California: 999-1002

[2] ZhouZ.-r., LiX.-b., LiuY.-chun.. Research and experiment of water-powered rockdrill with supporting leg [J]. China Mechanical Engineering, 2004, 15(14): 1236-1239

[3] WuX.-m., LiuD.-shun.. The research and design of hydraulic-rock drill [J]. Machine Tool & Hydraulics, 2007, 35(4): 123-124

[4] ZHOU Zi-rong, PENG Hao-ke, ZENG Shu-lin. Research on the influence factors of leakage in annular clearance seals [J]. Lubrication Engineering, 2005(1): 7–9. (in Chinese)

[5] ZhouZ.-r., LiX.-b., LiuY.-chun.Study and experiment on flow behavior of pressurized-water in annular micro-gaps [J], 2005, 16(11): 1008-1012

[6] WU Xian-ming, LIU De-shun. Leakage and airproof of water pressure impact device [J]. Lubrication Engineering, 2002(6): 64–68. (in Chinese)

[7] ZhouZ.-r., LiX.-b., ZengS.-lin.. Noise analysis and experimental study on water-powered impact rock drill [J]. Journal of Vibration and Shock, 2004, 23(4): 61-63

[8] ZhouZ.-rong.. Research on anti-erosion and anti-abrasion characteristics of impact piston materials for water-powered rock drills [J]. Construction Machinery and Equipment, 2004, 12: 48-52

[9] ZHOU Zi-rong, ZENG Shu-lin, HU Zheng-xian, et al. QPQ combined salt bath treatment technology and its application to rock drills [J]. Construction Machinery and Equipment, 2003(10): 41–44. (in Chinese)

[10] WuX.-m., LiuD.-shun.. Experimental study on impact part structural form, axial thrust, rotation angle and rock drilling efficiency of water-power rock drill [J]. Journal of Vibration and Shock, 2007, 26(8): 154-157

[11] TuomasG.Water powered percussive rock drilling process analysis modeling and numerical simulation [D], 2004, Luleå, Sweden, Department of Civil and Environmental Engineering Luleå University of Technology: 6-15

[12] TuomasG.Test bench for water powered DTH hammers [R], 2004, Sweden, Lulea University of Technology

[13] TuomasG.. Effective use of water in a system for water driven hammer drilling [J]. Tunneling and Underground Space Technology, 2004, 19(1): 69-78

[14] AiQ.-l., ZhouH., YangH.-yong.. Data acquisition and processing of water hydraulic test rig [J]. Engineering Design, 2002, 9(2): 94-96

[15] YANG Shu-dong, HE Xiao-feng, LI Zhuang-yun, et al. Design and study of sea water hydraulic pump test standi [J]. Hydraulics & Pneumatics, 1997(6): 11–12. (in Chinese)

[16] YangS.-d., YuZ.-y., HeX.-f., et al.. Study on flippers for raw water hydraulic axial piston pumps and motors [C]. Proc of the 3rd Int Symposium on Fluid Power Transmission and Control, 1999, Beijing China, Int Academic Publish: 191-196

[17] LiuZ., WuJ.-s., LiWei.. Research on testing principles & methods and experimental research on hydraulic impact machine [J]. China Mechanical Engineering, 2007, 18(15): 1769-1772

[18] Tianshui Research Institute of Rock Drilling MachinesPneumatic tools. GB/T 5621-2008Test methods of performance for rock drilling machines and pneumatic tools [S], 2008, Beijing, Standards Press of China

[19] Research Institute of Mine Shaft Construction of China Coal Research Institute.MT/T 198-1996, General technical conditions of hydraulic rock drill used in coal mine [S], 1996, Beijing, Standards Press of China