Application of high temperature heat pipe in hypersonic vehicles thermal protection

Abstract

In order to develop further the application of high temperature heat pipe in hypersonic vehicles thermal protection, the principles and characteristics of high temperature heat pipe used in hypersonic vehicles thermal protection were introduced. The methods of numerical simulation, theory analysis and experiment research were utilized to analyze the frozen start-up and steady state characteristic of the heat pipe as well as the machining improvement for fabricating irregularly shaped heat pipe which is suitable for leading edge of hypersonic vehicles. The results indicate that the frozen start-up time of heat pipe is long (10 min) and there exists large temperature difference along the heat pipe (47 °C/cm), but the heat pipe can reduce the temperature in stagnation area of hypersonic vehicles from 1 926 to 982 °C and work normally during 1 000–1 200°C. How to improve the maximum heat transfer capability and reduce the time needed for start-up from frozen state of the heat pipe by optimizing thermostructure such as designing of a novel wick with high performance is the key point in hypersonic vehicles thermal protection of heat pipe.

Keywords

thermal protection / high temperature heat pipe / heat transfer limit / start-up time

References

[1] HouZ.-q., HuJ.-gang.Thermal control technology of spacecraft [M], 2007, Beijing, Chinese Science and Technology Press: 147-148

[2] HouY.-z., ZhengJ.-l., DongWei.. Transient test of aerodynamic heating for hypersonic vehicle [J]. Journal of Aerospace Power, 2010, 25(2): 343-347

[3] LiuS., ZhangB.-ming.. Experimental study on a transpiration cooling thermal protection system [J]. Science China Technological Sciences, 2010, 53(10): 2765-2771

[4] MarcosJ., ColetoJ., AdarragaO.. Smart thermal protection systems [C]. 59th International Astronautical Congress, 2008, Pairs, IAF: 5669-5677

[5] BolivarC. M. V., AntoniniA., BiaminoS., PaveseM., FinoP., BadiniC.. Oxidation resistance of multilayer SiC for space vehicle thermal protection systems [J]. Advanced Engineering Materials, 2010, 12(7): 617-622

[6] MahulikarS. P., KhuranaS., DungarwalR., ShevakariS. G., SubramanianJ., GujarathiA. V.. Transient aero-thermal mapping of passive thermal protection system for nose-cap of reusable hypersonic vehicle [J]. Journal of the Astronautical Sciences, 2008, 56(4): 593-619

[7] SilversteinC. C.A feasibility study of heat-pipe-cooled leading edges for hypersonic cruise aircraft [R], 1971, Washington, D C, National Aeronautics and Space Administration

[8] GlassD. E.. Heat-pipe-cooled leading edges for hypersonic vehicles [C]. Workshop on Materials and Structures for Hypersonic Flight, 2006, Santa Barbara, NASA: 1-37

[9] CraigA. S., MingY. H., ScottD. K.. Feasibility of metallic structural heat pipes as sharp leading edges for hypersonic vehicles [J]. Journal of Applied Mechanics, 2009, 76(3): 031014-1-031019-9

[10] CraigA. S., MingY. H., AnthonyG. E.. The influence of coating on performance of structural heat pipes for hypersonic leading edges [J]. Journal of American Ceramic Society, 2009, 92(2): 553-555

[11] CraigA. S., MingY. H., LorenzoV.. Metallic structural heat pipes as sharp leading edges for mach 7 vehicles [C]. Proceedings of International Mechanical Engineering Congress and Exposition 2007, 2007, Seattle, ASME: 865-872

[12] ScottD. K., DougT. Q., CraigA. S.. A heat plate leading edge for hypersonic vehicles [C]. Proceedings of International Mechanical Engineering Congress and Exposition 2008, 2008, Boston, ASME: 175-181

[13] LiuD.-h., ZhengX.-p., WangF., LiuY.-hua.. Heat conduction and thermal protection mechanism of heat pipe cooled thermal protection structures [J]. Journal of Tsinghua University: Science & Technology, 2010, 50(7): 1094-1098

[14] Klock-mccookE. J., PodhinyJ., SullivanB. J.. Thermal-structural analysis of heat pipe cooled cowl leading edges [C]. SAMPE ′09 Spring Symposium Conference Proceedings, 2009, Baltimore, SAMPE: 1-14

[15] Textbook Editorial Committee of Chinese PLA General Equipment Department Military Training. Hypersonic aerodynamic heating and thermal protection [M]. Beijing: Defense Industry Press, 2003: 41–42. (in Chinese)

[16] TournierJ. M., Ei-genkM. S.. Startup of a horizontal lithium-molybdenum heat pipe from a frozen state [J]. International Journal of Heat and Mass Transfer, 2003, 46(4): 671-685

[17] ColwellG. T., HartleyJ. G.Modeling of transient heat pipe operation [R], 1971, Washington, D C, National Aeronautics and Space Administration

[18] BomanT., EliasT.. Test on a sodium/Hastelloy X wing leading edge heat pipe for hypersonic vehicles [C]. 5th Joint Thermophysics and Heat Transfer Conference, 1990, Seattle, AIAA and ASME: 1-10

[19] CamardaC. J., GlassD. E.Thermostructural applications of heat pipes for cooling leading edges of high speed aerospace vehicles [R], 1992, Hampton, National Aeronautics and Space Administration

[20] XiaoH., GeorgeF.. Design and fabrication of hybrid bi-modal wick structure for heat pipe application [J]. Journals of Porous Materials, 2008, 15(6): 635-642

[21] ChenL.-z., OuD.-bin.. Primary exploration of high temperature heat pipe in thermal protection [J]. Experiment Hydromechanics, 2010, 24(1): 51-54