Wind tunnel testing of wind pressures on a large gymnasium roof

Abstract

A wind tunnel test was conducted for a large steel gymnasium structure. Simultaneous pressure measurements were made on its entire ellipsoidal roof in a simulated suburban boundary layer flow field. Special attention is paid to the characteristics of fluctuating wind pressures in different zones on the roof. Some selected results are presented: 1) correlations between fluctuating wind pressures on both roof surfaces, 2) eigenvalues and eigenvectors of covariance matrices of the fluctuating wind pressures, 3) probability distributions of the fluctuating wind pressures, and 4) statistical characteristics of peak factor. Furthermore, the applicability of the quasi-steady approach is discussed in detail. Based on the results, an empirical formula for estimating the minimum pressure coefficients, using a peak factor approach, is presented. Comparison of the minimum pressure coefficients determined by the proposed formula and those obtained from the wind tunnel tests is made to examine the applicability and accuracy of the proposed formula.

Keywords

long-span roof / wind pressure / wind tunnel test / gymnasium roof

References

[1] LamK. M., ZhaoJ. G.. Occurrence of peak lifting actions on a large horizontal cantilevered roof [J]. Journal of Wind Engineering and Industrial Aerodynamics, 2002, 90(8): 897-940

[2] MelbourneW. H.. Response of large roofs to wind action [J]. Journal of Wind Engineering and Industrial Aerodynamics, 1995, 54/55(1): 325-335

[3] KillenG. P., LetchfordC. W.. A parametric study of wind loads on grandstand roofs [J]. Engineering Structures, 2001, 23(6): 725-735

[4] LetchfordC. W., KillenG. P.. Equivalent static wind loads for cantilevered grandstand roofs [J]. Engineering Structures, 2002, 24(2): 207-217

[5] AS1170.2-1989, Australian Wind Loading Code [S].

[6] CookN. J.The designer’s guide to the wind loading of building structures. Part 2: Static structures [R], 1990, London, BRE/Butterworths

[7] MarighettiJ., WittwerA., BortoliM. D., De BortoliM., NataliniB., PaluchM., NataliniM.. Fluctuating and mean pressure measurements on a stadium covering in wind tunnel [J]. Journal of Wind Engineering and Industrial Aerodynamics, 2000, 84(3): 321-328

[8] ZHU L D, CHEN W, SHI Z C, ZHANG F. Wind pressure distribution on a stadium roof by wind tunnel model test [C]// 10th International Conference on Wind Engineering, Copenhagen, Denmark, 1999: 1583–1590.

[9] HolmesJ. D.. Optimized peak load distributions [J]. Journal of Wind Engineering and Industrial Aerodynamics, 1992, 41(1/2/3): 267-276

[10] HolmesJ. D., SankaranR., KwokK. C. S., SymeM. J.. Eigenvector modes of fluctuating pressures on low-rise building models [J]. Journal of Wind Engineering and Industrial Aerodynamics, 1997, 69/70/71(1): 697-707

[11] BienkiewiczB., TamuraY., HamH. J., UedaH., HibiK.. Proper orthogonal decomposition and reconstruction of multichannel roof pressure [J]. Journal of Wind Engineering and Industrial Aerodynamics, 1995, 54/55(1): 369-381

[12] KindR. J.. Worst suctions near edges of flat rooftops with parapets [J]. Journal of Wind Engineering and Industrial Aerodynamics, 1988, 31(2/3): 251-264

[13] LetchfordC. W., IversonR. E., McdonaldJ. R.. Application of the quasi-steady theory to full scale measurements on the Texas Tech Building [J]. Journal of Wind Engineering and Industrial Aerodynamics, 1993, 48(1): 111-132

[14] HoxeyR. P., RichardsP. J.. Full-scale wind load measurements point the way forward [J]. Journal of Wind Engineering and Industrial Aerodynamics, 1995, 57(2/3): 215-224

[15] UematsuY., IsyumovN.. Review: Wind pressures acting on low-rise buildings [J]. Journal of Wind Engineering and Industrial Aerodynamics, 1999, 82(1): 1-25

[16] CookN. J.. Calibration of the quasi-static and peak-factor approaches to the assessment of wind loads against the method of Cook and Mayne [J]. Journal of Wind Engineering and Industrial Aerodynamics, 1982, 10(3): 315-341

[17] LevitanM. L., MehtaK. C., VannW. P., HolmesJ. D.. Field measurements of pressures on the Texas Tech building [J]. Journal of Wind Engineering and Industrial Aerodynamics, 1991, 38(2/3): 227-234

[18] OkadaH., HaY. C.. Comparison of wind tunnel and full-scale pressure measurement tests on the Texas Tech building [J]. Journal of Wind Engineering and Industrial Aerodynamics, 1992, 43(3): 1601-1612

[19] UematsuY., IsyumovN.. Peak gust pressures acting on the roof and wall edges of a low-rise building [J]. Journal of Wind Engineering and Industrial Aerodynamics, 1998, 77/78(1): 217-231

[20] GB50009-2001. Load code for the design of building structures [S]. (in Chinese)

[21] AIJ Recommendations for Loads on Buildings (English version) [R]. Tokyo: Architectural Institute of Japan, 1996.

[22] LiQ. S., CalderoneI., MelbourneW. H.. Probabilistic characteristics of pressure fluctuations in separated and reattaching flows for various free-stream turbulences [J]. Journal of Wind Engineering and Industrial Aerodynamics, 1999, 82(1): 125-145

[23] BestteF., CetmakJ. E.. Correlation of internal and area-averaged external wind pressures on low-rise buildings [J]. Journal of Wind Engineering and Industrial Aerodynamics, 1997, 69/70/71(1): 557-566

[24] HolmesJ. D.. Analysis and synthesis of pressure fluctuations on bluff bodies using eigenvectors [J]. Journal of Wind Engineering and Industrial Aerodynamics, 1990, 33(1/2): 219-230

[25] GioffreM., GusellaV., GrigoriuM.. Non-Gaussian wind pressure on prismatic buildings. I: Stochastic field [J]. Journal of Structural Engineering ASCE, 2001, 127(9): 981-989