Tuning of fuzzy PID controller for Smith predictor

Abstract

An analytical tuning method was proposed for fuzzy PID controller used in Smith predictor in order to extend its application and improve its robustness. The fuzzy PID controller was expressed as a sliding mode control. Based on Lyapunov theory, Smith predictor was analyzed in time domain. The parameters of the fuzzy PID controller can be obtained using traditional linear control theory and sliding mode control theory. The simulation experiments were implemented. The simulation results show that the control performance, robustness and stability of the fuzzy PID controller are better than those of the PID controller in Smith predictor.

Keywords

Smith predictor / Lyapunov theory / fuzzy PID controller / robustness

References

[1] KayaI.. IMC based automatic tuning method for PID controllers in a Smith predictor configuration [J]. Computers and Chemical Engineering, 2004, 28(3): 281-290

[2] CamachoO., FranciscoD. L. C.. Smith predictor based-sliding mode controller for integrating processes with elevated dead-time [J]. ISA Transactions, 2004, 43: 257-270

[3] ChenN., LiuW.-y., GuiW.-hua.. Delay-dependent decentralized robust control for power systems based on output feedback [J]. J Cent South Univ: Science and Technology, 2009, 40(3): 711-718

[4] RONG Hui-gui, ZHOU Ning, JIN Min, WU Jia-xin. Research on service-oriented framework of interface prototype driven development [C]// The 1st IEEE Inter Conf on Computer Science and Software Engineering. Wuhan, 2008: 552–557.

[5] NormeyJ. E., CamachoE. F.. Dead time compensators: A survey [J]. Control Engineering Practice, 2008, 16(4): 407-428

[6] ZhangG.-h., QianF., ShaoH.-he.. Robust tuning method for modified Smith predictor [J]. Journal of Systems Engineering and Electronics, 2007, 18(1): 89-94

[7] GeorgeK. I. M., HuB. G., RaymondG. G.. Analysis of direct action fuzzy PID controller structures [J]. IEEE Trans Syst, Man, Cybern B, 1999, 29(3): 371-388

[8] LiH. X., TsoS. K.. Quantitative design and analysis of fuzzy PID control: A step towards autotuning [J]. International Journal of Systems Science, 2000, 31(5): 545-553

[9] GeorgeK. I. M., HuB. G., RaymondG. G.. Two-level tuning of fuzzy PID controllers [J]. IEEE Trans Syst, Man, Cybern B, 2001, 31(2): 263-269

[10] RaoA. S., ChidambaramM.. Analytical design of modified smith predictor in a two-degrees-of-freedom control scheme for second order unstable processes with time delay [J]. ISA Transactions, 2008, 47: 407-419

[11] ChienI. L., PengS. C., LiuJ. H.. Simple control method for integrating processes with long dead-time [J]. Journal of Process Control, 2002, 12(2): 391-404

[12] WangY.-y., ZhouX.-she.. Fuzzy-Smith control for QoS-adaptive notification service [J]. Lecture Notes in Computer Science, 2007, 46(11): 1140-1147

[13] LiY., HeongK., ChongG. C. Y.. PID control system analysis and design [J]. IEEE Control Systems, 2006, 26(1): 32-41

[14] DuanX.-g., LiH.-x., DengH.. An effective tuning method for fuzzy PID with internal model control [J]. Industrial and Engineering Chemistry Research, 2008, 47(21): 8317-8323

[15] LiH. X., GatlandH.. Conventional fuzzy logic control and its enhancement [J]. IEEE Trans Syst, Man, Cybern B, 1996, 26(10): 791-797

[16] EdwardsC., SpurgenS. K.Sliding mode control: Theory and applications [M], 1998, London, Taylor & Francis Ltd: 1-30

[17] AstromK. J., HagglundT.. The future of PID control [J]. Control Engineering Practice, 2001, 9: 1163-1175

[18] LiY., KiamH. A., GregoryC. Y.. Patents, software and hardware for PID Control [J]. IEEE Control Systems Magazine, 2006, 26(1): 42-54

[19] HanJ. Q.. Form PID to active disturbance rejection control [J]. IEEE Transaction on Industrial Electronics, 2009, 56(3): 900-906

[20] LiH. X., GatlandB. H., GreenA. W.. Fuzzy variable structure control [J]. IEEE Trans Sys, Man, Cybern B, 1997, 27(2): 306-312