Field tests on mechanical characteristics and strength parameters of red-sandstone

Abstract

Large-scale field shear tests on ten specimens of the red-sandstone embankment at a highway in Hunan, China, were performed to examine mechanical characteristics and parameters of red-sandstone. The curves of thrust-displacement, failure mode, and shear strength parameters for red-sandstone with different water contents, different compactions, and different grain size distributions were obtained from the tests. A practical procedure of in-situ test for red-sandstone embankment was proposed to normalize the test equipment and test steps. Based on three-dimensional thrust-sliding limit equilibrium method, the formulas for calculating strength parameters of red-sandstone considering three-dimensional sliding surface were inferred. The results show that red-sandstone has typical complete curves of stress-strain, strain softening, which are caused by the special structure of red-sandstone; water content and compaction are important factors for strength and failure mode of red-sandstone; The average value of cohesion and internal friction angle of the specimens calculated by three-dimensional technique are 21.56 kPa and 29.29°, respectively, and those by traditional two-dimensional method are 25.52 kPa and 33.76°, respectively.

Keywords

red-sandstone / large-scale field test / mechanical characteristic / strength parameter

References

[1] DongZ.-f., LiuD.-wen.. Study on engineering character of “Red Rock“ for embankment [J]. Journal of Hunan University: Natural Sciences, 2003, 30(3): 90-93

[2] XuW.-j., HuR.-l., TanR.-j., ZengR.-y., YuH.-qing.. Study on field test of rock-soil aggregate on right bank of Longpan in tiger-leaping gorge area [J]. Chinese Journal of Rock Mechanics and Engineering, 2006, 25(6): 1270-1277

[3] LiX., LiaoQ.-l., HeJ.-m., ChenJian.. Study on in-situ tests of mechanical characteristics on soil-rock aggregate [J]. Chinese Journal of Rock Mechanics and Engineering, 2007, 26(12): 2377-2384

[4] VallejoL. E.. An explanation for mudflows [J]. Geotechnique, 1979, 29(4): 351-354

[5] VallejoL. E.. Extension of the particulate model of stability analysis for mudflows [J]. Soils and Foundations, 1989, 29(3): 1-13

[6] VallejoL. E., MawbyR.. Porosity influence on the shear strength of granular material-clay mixtures [J]. Engineering Geology, 2000, 58(2): 125-136

[7] XuW. J., HuR. L., TanR. J.. Some geomechanical properties of soil-rock mixtures in the Hutiao Gorge area, China [J]. Geotechnique, 2007, 57(3): 255-264

[8] AltmanS. J., RiversM. L., RenoM. D., CyganR. T., MclainA. A.. Characterization of adsorption sites on aggregate soil samples using synchrotron X-ray computerized microtomography [J]. Environmental Science and Technology, 2005, 39(8): 2679-2685

[9] LanaroF., TolppanenP.. 3D characterization of coarse aggregates [J]. Engineering Geology, 2002, 65(1): 17-30

[10] XuW. J., YueZ. Q., HuR. L.. Study on the mesostructure and mesomechanical characteristics of the soil-rock mixture using digital image processing based finite element method [J]. International Journal of Rock Mechanics and Mining Sciences, 2008, 45(5): 749-762

[11] SpringmanS. M., JommiC., TeysseireP.. Instabilities on moraine slopes induced by loss of suction: A case history [J]. Geotechnique, 2003, 53(1): 3-10

[12] YueZ. Q., ChenS., ThamL. G.. Finite element modeling of geomaterials using digital image processing [J]. Computers and Geotechnics, 2003, 30(5): 375-397

[13] ZhaoM. H., ZouX. J., ZouP. X. W.. Disintegration characteristics of red sandstone and its filling methods for highway roadbed and embankment [J]. Journal of Material in Civil Engineering, 2007, 19(5): 404-410

[14] ChenX. B., ZhangJ. S., LiuB. C., TangM. X.. Effects of stress conditions on rheological properties of granular soil in large triaxial rheology laboratory tests [J]. Journal of Central South University of Technology, 2008, 15(s1): 397-401

[15] ZhangQ.-x., GeX.-r., HuangM., SunHong.. Testing study on fatigue deformation law of red-sandstone under triaxial compression with cyclic loading [J]. Chinese Journal of Rock Mechanics and Engineering, 2006, 25(3): 473-478

[16] YuZ.-h., WeiH.-w., ZouY.-sheng.. Characteristics of shear strength and deformation of reinforced red sand silty clay with geosynthetics [J]. Chinese Journal of Rock Mechanics and Engineering, 2005, 24(15): 2770-2779

[17] ChenZ.-y., MiH.-l., WangX.-gang.. A three-dimensional limit equilibrium method for slope stability analysis [J]. Chinese Jounal of Geotechnical Engineering, 2001, 23(5): 525-529

[18] ZhangF.-m., ChenZ.-y., MiH.-liang.. 3-D limit equilibrium theory and its application in block stability analysis [J]. Hydrogeology and Engineering Geology, 2002, 29(4): 33-35

[19] ChangS.-biao.Engineering geologic handbook [M], 19923rd ed.Beijing, China Architecture and Building Press