Numerical analysis on thermal regime in double-loop channel inductor

Abstract

In order to investigate the temperature distribution, a three-dimensional finite element model (FEM) was developed to simulate the temperature regime in the channels of double-loop inductor, and the simulated results were compared with experimental data from low load trials of a 400 kW inductor. The results of numerical simulations, such as the temperature and Joule heating rate, show reasonable correlation with experimental data. The results indicate that Joule heating rate and the temperature reach the maximum at the corners and the minimum at the centre of the cross-section area. The temperature difference between the inlet and outlet is in an inverse proportion to mass transport. Joule heating rate and the temperature are directly proportional to power frequency. It is concluded that mass transport and power frequency play a critical role in determining the temperature regime and Joule heating rate, the relative permeability of the magnetic core shows no significant influence on temperature regime and Joule heating rate, when the relative permeability varies from 5 000 to 10 000.

Keywords

numerical simulation / inductor / finite element method / Joule heating rate

References

[1] ZhangS.-fang.Induction heating manual [M], 1985, Beijing, Defense Industry Press

[2] JinX.-chang.. Surface effects in induction heating [J]. Wuhan Institute of Chemical Technology Journal, 1995, 17(4): 65-68

[3] ZinnS., SemiatinS. L.Elements of induction heating: Design, control, and applications [M], 1988, Detroit, American Association of Metal

[4] HanZ.-cheng.Electromagnetic metallurgy [M], 2001, Beijing, Metallurgical Industry Press

[5] MorosA., HuntJ. C. R.. Recalculating flows in the cross-section of a channel induction furnace [J]. Heat Mass Transfer, 1988, 31(7): 1497-1515

[6] VivesC., RicouR.. Magnetohydrodynamic flows in a channel induction furnace [J]. Metal Trans, 1991, 22B: 193-209

[7] DrewakR., MuhlbauerA.Controlling heat transfer in a channel-induction furnace [C], 1997, London, Proceedings of Advances in Engineering Heat Transfer.

[8] RappazJ., SwierkoszM.. Mathematical modeling and simulation of induction heating processes [J]. Appl Math Comp Sci, 1996, 6(2): 207-222

[9] BodartO., BoureauA. V., TouzaniR.. Numerical investigation of optimal control of induction heating process [J]. Appl Math Modeling, 2001, 25: 697-712

[10] DrewakR., JakovichA., MuhlbauerA. A., NackeB.. Experimental and numerical investigations of the melt flow in channel-induction furnaces [J]. Magnitnaya Gidrodinamica, 1996, 32(4): 433-443

[11] ZHAO C, FAUTRELLE Y, SZEKELY J. Turbulent fluid flow in induction furnaces [C]// Proceedings of the 121st TMS Annual Meeting. San Diego, 1991.

[12] SunJ.-s., WuC.-song.. The electromagnetic force and its influence on the weldpool fluid flow in MIG welding [J]. Acta Phys Sin, 2001, 50: 209-216

[13] ZiB.-t., YaoK.-fu.. Numerical simulation of liquid alloy flow field during solidification under applied pulsed magnetic field [J]. Acta Phys Sin, 2003, 52: 115-119

[14] HEGEWALDT F, WICKER H. Mathematical modelling in electromagnetism [C]// Proceedings of the International Seminar on Optimising Channel Inductors. Leningrad, 1989.