Effect of loading rate on fracture characteristics of rock

Abstract

The three-point bending experiments were applied to investigating effects of loading rates on fracture toughness of Huanglong limestone. The fracture toughness of Huanglong limestone was measured over a wide range of loading rates from 9×10⁻⁴ to 1.537 MPa·m^1/2/s. According to the approximate relationship between static and dynamic fracture toughness of Huanglong limestone, relationship between the growth velocity of crack and dynamic fracture toughness was obtained. The main conclusions are summarized as follows. (1) When the loading rate is higher than 0.027 MPa·m^1/2/s, the fracture toughness of Huanglong limestone increases markedly with increasing loading rate. However, when loading rate is lower than 0.027 MPa·m^1/2/s, fracture toughness slightly increases with an increase in loading rate. (2) It is found from experimental results that fracture toughness is linearly proportional to the logarithmic expression of loading rate. (3) For Huanglong limestone, when the growth velocity of crack is lower than 100 m/s, the energy release rate slightly decreases with increasing the growth velocity of crack. However, when the growth velocity of crack is higher than 1 000 m/s, the energy release rate dramatically decreases with an increase in the crack growth velocity.

Keywords

fracture toughness of rock / three-point bending round bar / loading rate / velocity of crack growth

References

[1] OuchterlonyF.. Suggested methods for determining the fracture toughness of rock [J]. International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts, 1988, 25(2): 71-96

[2] FowellR. J.. Suggested methods for determining mode I fracture toughness using cracked chevron notched Brazilian disc (CCNBD) specimens [J]. International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts, 1995, 32(1): 57-64

[3] XiaK., NasseriM., MohantyB., LuF.. Effects of microstructures on dynamic compression of Barre granite [J]. International Journal of Rock Mechanics and Mining Sciences, 2008, 45(6): 879-887

[4] NasseriM., MohantyB., YoungR. P.. Fracture toughness measurements and acoustic emission activity in brittle rocks [J]. Pure Applied Geophysics, 2006, 163(5/6): 917-945

[5] NasseriM., MohantyB.. Fracture toughness anisotropy in granitic rocks [J]. International Journal of Rock Mechanics and Mining Sciences, 2008, 45(2): 167-193

[6] BackersT., FardinN., DresenG., StephanssonO.. Effect of loading rate on mode I fracture toughness, roughness and micromechanics of sandstone [J]. International Journal of Rock Mechanics and Mining Sciences, 2003, 40(3): 425-433

[7] LiZ.-l., WangQ.-zhi.. Experimental research on effect of loading rate for dynamic fracture toughness of rock [J]. Chinese Journal of Geotechnical Engineering, 2006, 28(12): 2116-2120

[8] ZhangZ. X., YuY., ZhaoQ.. Influences of loading rates on fracture toughness of gabbro and marble [C]. ROSSMANITH H P. Fracture and Damage of Concrete and Rock FDCR-2, 1993, London, E & FN Spon: 418-425

[9] JinF.-n., YangH.-jie.. Loading-rate effect of rock [J]. Chinese Journal of Rock Mechanics and Engineering, 1998, 17(6): 711-717

[10] OuchterlonyF.. On the background to the formulae and accuracy of rock fracture toughness measurements using ISRM standard core specimens [J]. International Journal of Rock Mechanics and Mining Sciences, 1989, 26(1): 13-23

[11] ZhaoJ., LiH. B., ZhaoY. H.Dynamic strength tests of the Bukit Timah granite [R], 1998, Singapore, Nanyang Technological University

[12] ZhaiY., MaW.-g., ZhaoJ.-h., HuC.-ming.. Dynamic failure analysis on granite under uniaxial impact compressive load [J]. Chinese Journal of Geotechnical Engineering, 2007, 29(3): 385-390

[13] ZhouX.-p., YangH.-qing.. Micromechanical modeling of dynamic compressive responses of mesoscopic heterogeneous brittle rock [J]. Theoretical and Applied Fracture Mechanics, 2007, 48(1): 1-20

[14] ZhouX.-ping.. Analysis of the localization of deformation and the complete stress-strain relation for mesoscopic heterogeneous brittle rock under dynamic uniaxial tensile loading [J]. International Journal of Solids and Structures, 2004, 41(5/6): 1725-1738

[15] FreundL. B.Dynamic fracture mechanics [M], 1990, Cambridge, Cambridge University Press: 49-51

[16] RittelD., MaigreH.. An investigation of dynamic crack initiation in PMMA [J]. Mechanics of Materials, 1996, 23(3): 229-239

[17] WadaH.. Determination of dynamic fracture toughness for PMMA [J]. Engineering Fracture Mechanics, 1992, 41(6): 821-831

[18] KobayashiT., KazinoT., KamimuraM., IkawaH.. Basic principle of dynamic fracture toughness evaluation by computer aided instrumented impact testing (CAI) system [C]. Advances in Fracture Research, 1989, Oxford, Pergamon Press: 651-658