Wheel slip-sinkage and its prediction model of lunar rover

Abstract

In order to investigate wheel slip-sinkage problem, which is important for the design, control and simulation of lunar rovers, experiments were carried out with a wheel-soil interaction test system to measure the sinkage of three types of wheels in dimension with wheel lugs of different heights and numbers under a series of slip ratios (0–0.6). The curves of wheel sinkage versus slip ratio were obtained and it was found that the sinkage with slip ratio of 0.6 is 3–7 times of the static sinkage. Based on the experimental results, the slip-sinkage principle of lunar’s rover lugged wheels (including the sinkage caused by longitudinal flow and side flow of soil, and soil digging of wheel lugs) was analyzed, and corresponding calculation equations were derived. All the factors that can cause slip sinkage were considered to improve the conventional wheel-soil interaction model, and a formula of changing the sinkage exponent with the slip ratio was established. Mathematical model for calculating the sinkage of wheel according to vertical load and slip ratio was developed. Calculation results show that this model can predict the slip-sinkage of wheel with high precision, making up the deficiency of Wong-Reece model that mainly reflects longitudinal slip-sinkage.

Keywords

lunar rover / slip-sinkage / loose lunar soil / stress distribution / slip ratio

References

[1] WangS.-c., DengZ.-q., HuM., GaoH.-bo.. Dynamic model building and simulation for mechanical main body of lunar lander [J]. Journal of Central South University of Technology, 2005, 12(3): 329-334

[2] YoshidaK., HiroshiH.. Motion dynamics of a rover with slip-based traction model [C]. Proceedings of IEEE International Conference on Robotics and Automation, 2002, Piscataway, IEEE Robotics and Automation Society

[3] ApostolopoulosD. S.Analytical configuration of wheeled robotics locomotion [R], 2001, Pittsburghers, Robotics Institute of Carnegie Mellon University

[4] MichaudS., RichterL., ThuerT., GibbeschA., HuelsingT.. Rover chassis evaluation and design optimization using the RCET [C]. Proceedings of the 9th ESA Workshop on ASTRA, 2006, Noordwijk, European Space Agency: 1-8

[5] PatelN., ElleryA., AllouisE., SweetingM., RichterL.. Rover mobility performance evaluation tool (RMPET): A systematic tool for rover chassis evaluation via application of Bekker theory [C]. Proceedings of the 8th ESA Workshop on ASTRA, 2004, Noordwijk, European Space Agency: 251-258

[6] SohlG., JainA.. Wheel-terrain contact modeling in the ROAMS planetary rover simulation [C]. Proceedings of IDETC’05 ASME International Design Engineering Technical Conference and Computers and Information in Engineering Conference, 2005, New York, American Society of Mechanical Engineers: 1-9

[7] PierreL., RolandS.. Wheel torque control in rough terrain: Modeling and simulation [C]. Proceedings of IEEE International Conference on Robotics and Automation, 2005, Piscataway, IEEE Robotics and Automation Society: 867-872

[8] HutangkabodeeS., ZweiriY. H., SeneviratneL. D., AlthoeferK.. Performance prediction of a wheeled vehicle on unknown terrain using identified soil parameters [C]. Proceedings of IEEE International Conference on Robotics and Automation, 2006, Piscataway, IEEE Robotics and Automation Society: 3356-3361

[9] IagnemmaK., KangS., ShiblyH., DubowskyS.. Online terrain parameter estimation for wheeled mobile robots with application to planetary rovers [J]. IEEE Transactions on Robotics, 2004, 20(5): 921-927

[10] IshigamiG., MiwaA., NagataniK., YoshidaK.. Terramechanics-based model for steering maneuver of planetary exploration rovers on loose soil [J]. Journal of Field Robotics, 2007, 24(3): 233-250

[11] IagnemmaK., DubowskyS.. Traction control of wheeled robotic vehicles with application to planetary rovers [J]. International Journal of Robotics Research, 2004, 23(10): 1029-1040

[12] IshigamiG., NagataniK., YoshidaK.. Path planning for planetary exploration rovers and its evaluation based on wheel slip dynamics [C]. Proceedings of IEEE International Conference on Robotics and Automation, 2007, Piscataway, IEEE Robotics and Automation Society: 2361-2366

[13] BekkerM. G.Introduction to terrain-vehicle [M], 1969, Michigan, The University of Michigan Press

[14] WongJ. Y., ReeceA. R.. Prediction of rigid wheel performance based on analysis of soil-wheel stresses, part I: Performance of driven rigid wheels [J]. Journal of Terramechanics, 1967, 4(1): 81-98

[15] WongJ. Y.Theory of ground vehicles [M], 20013rd ed.New York, John Wiley & Sons

[16] YoshidaK., IshigamiG.. Steering characteristics of a rigid wheel for exploration on loose soil [C]. Proceedings of IEEE International Conference on Intelligent Robots and Systems, 2004, Piscataway, IEEE Robotics and Automation Society: 3995-4000

[17] ShiblyH., IagnemmaK., DubowskyS.. An equivalent soil mechanics formulation for rigid wheels in deformable terrain, with application to planetary exploration rovers [J]. Journal of Terramechanics, 2005, 42: 1-13

[18] BrooksC. A., IagnemmaK., DubowskyS.. Visual wheel sinkage measurement for planetary rover mobility characterization [J]. Autonomous Robotics, 2006, 21: 55-64

[19] BauerR., LeungW., BarfootT.. Experimental and simulation results of wheel-soil interaction for planetary rovers [C]. Proceedings of IEEE/RSJ International Conference on Intelligent Robots and Systems, 2005, Piscataway, IEEE Robotics and Automation Society: 586-591

[20] TaoJ.-g., QuanQ.-q., DengZ.-q., WangL.. Analysis of wheel-soil interaction of rolling wheels with different diameters on a lunar rover [J]. Journal of Harbin Engineering University, 2007, 28(10): 1144-1149

[21] ZhuanJ.-de.Computational vehicle terramechanics [M], 2002, Beijing, China Machine Press

[22] JanosiZ., HanamotoB.. Analytical determination of drawbar pull as a function of slip for tracked vehicle in deformable soils [C]. Proceeding of the 1st International Conference of ISTVES, 1961, Torino, International Society for Terrain-Vehicle Systems: 707-726