Complete geometric nonlinear formulation for rigid-flexible coupling dynamics

Abstract

A complete geometric nonlinear formulation for rigid-flexible coupling dynamics of a flexible beam undergoing large overall motion was proposed based on virtual work principle, in which all the high-order terms related to coupling deformation were included in dynamic equations. Simulation examples of the flexible beam with prescribed rotation and free rotation were investigated. Numerical results show that the use of the first-order approximation coupling (FOAC) model may lead to a significant error when the flexible beam experiences large deformation or large deformation velocity. However, the correct solutions can always be obtained by using the present complete model. The difference in essence between this model and the FOAC model is revealed. These coupling high-order terms, which are ignored in FOAC model, have a remarkable effect on the dynamic behavior of the flexible body. Therefore, these terms should be included for the rigid-flexible dynamic modeling and analysis of flexible body undergoing motions with high speed.

Keywords

flexible beam / rigid-flexible coupling / dynamic modeling / numerical simulation

References

[1] HongJ.-zhen.Computational dynamics of multibody system [M], 1999, Beijing, High Education Press

[2] TangH.-p., TangC.-x., YinC.-feng.. Optimization of actuator/sensor position of multi-body system with quick startup and brake [J]. Journal of Central South University of Technology, 2007, 14(6): 803-807

[3] KaneT., RyanR., BanerjeeA.. Dynamics of a cantilever beam attached to a moving base [J]. Journal of Guidance, Control and Dynamics, 1987, 10: 139-151

[4] MayoJ., DominguezJ.. Finite element geometrically nonlinear dynamic formulation of flexible multibody systems using a new displacements representation [J]. Journal of Vibration and Acoustics, 1997, 119: 573-581

[5] YooH. H., ChungJ., ChuangJ.. Equilibrium and modal analyses of rotating multibeam structures employing multiple reference frames [J]. Journal of Sound and Vibration, 2007, 302: 789-805

[6] LiaA. Q., LiewK. M.. Non-linear substructures approach for dynamic analysis of rigid-flexible multibody system [J]. Computer Methods in Applied Mechanics and Engineering, 1994, 114: 379-396

[7] ShabanaA. A., MikkolaA. M.. Use of the finite element absolute nodal coordinate formulation in modeling slop discontinuity [J]. Trans ASME J Mech Des, 2003, 125: 342-350

[8] SugiyamaH., GerstmayS., ShabanaA. A.. Deformation modes in the finite element absolute nodal coordinate formulation [J]. Journal of Sound and Vibration, 2006, 298: 1129-1149

[9] JiangL.-z., HongJ.-zhen.. Coupling dynamics of the elastic beam with translation [J]. Chinese Quarterly of Mechanics, 2002, 23(4): 450-454

[10] LiuJ.-yang.Study of dynamic modeling theory of rigid-flexible coupling system [D], 2000, Shanghai, Department of Engineering Mechanics, Shanghai Jiao Tong University

[11] YangH., HongJ.-z., YuZ.-yue.. Dynamics modeling of a flexible hub-beam system with a tip mass [J]. Journal of Sound and Vibration, 2003, 266(4): 759-774

[12] LiuJ.-y., HongJ.-zhen.. Geometric stiffening effect on rigid-flexible coupling dynamics of an elastic beam [J]. Journal of Sound and Vibration, 2004, 278(4/5): 1147-1162

[13] CaiG. P., LimC. W.. Optimal tracking control of a flexible hub-beam system with time delay [J]. Multibody System Dynamics, 2006, 16: 331-350

[14] DongX.-j., MengG., CaiG.-ping.. Dynamic modeling and analysis of a rotating flexible beam [J]. Journal of Vibration Engineering, 2006, 19(4): 488-493

[15] HuangY.-a., DengZ.-c., YaoL.-xiao.. Dynamic analyze of a rotating rigid-flexible coupled smart structure with large deformation [J]. Applied Mathematics and Mechanics, 2007, 28(10): 1203-1212