Digital characterization and mathematic model of sodium penetration into cathode material for aluminum electrolysis

Abstract

The sodium expansion curves of semi-graphitic cathode and TiB₂/C composite cathode with different TiB₂ contents were measured with the improved Rapoport-Samoilenko apparatus. The mathematic model of the sodium expansion was deduced on the basis of the experimental results. The sodium expansion parameter (a) and penetration rate factor (Q), were introduced into the model. The model was validated with the experimental sodium expansion curves self-measured and reported. The results show that the variation tendency of the sodium expansion parameter (a) and penetration rate factor (Q) is consistent with that of the experimental curves. The model is capable of not only conveniently judging the cathode quality, but also favorably establishing a unified standard of the resistance to sodium penetration of cathode.

Keywords

aluminum electrolysis / cathode / sodium expansion / modeling / characterization

References

[1] SørlieM., ØyeH. A.Cathodes in aluminum electrolysis [M], 19942nd ed.Düsseldorf, Aluminum-Verlag

[2] LiQ.-yu.Development and industrial application of wettable inert TiB₂ cathodic composite coating for aluminum electrolysis [D], 2003, Changsha, Central South University

[3] RapoportM. B., SamoilenkoV. N.. Deformation of cathode blocks in aluminum baths during process of electrolysis [J]. Tsvetnye Metally, 1957, 30(2): 44-51

[4] BrissonP. Y., SoucyG.. Revisiting sodium and bath penetration in the carbon lining of aluminum electrolysis cell [C]. KVANDE H. Light Metals 2005, 2005, Warrendale, The Minerals, Metals and Materials Society: 727-732

[5] PeyneauJ. M., GaspardJ. R., DumasD., SamanosB.. Laboratory testing of the expansion under pressure due to sodium intercalation in carbon cathode materials for aluminum smelters [C]. CUTSHALL E R. Light Metals 1992, 1992, Warrendale, The Minerals, Metals and Materials Society: 801-808

[6] SchreinerH., ØyeH. A.. Sodium expansion of cathode materials under pressure [C]. EVANS J. Light Metals 1995, 1995, Warrendale, The Minerals, Metals and Materials Society: 463-470

[7] LiQ.-y., LaiY.-q., LiJ., YangJ.-h., FangJ., ChenZ.. The effect of sodium-containing additives on the sodium-penetration resistance of TiB₂/C composite cathode in aluminum electrolysis [C]. KVANDE H. Light Metals 2005, 2005, Warrendale, The Minerals, Metals and Materials Society: 789-791

[8] LiJ., FangJ., LiQ.-y., LaiY.-qing.. Effect of TiB2 content on resistance to sodium penetration of TiB₂/C cathode composites for aluminum electrolysis [J]. Journal of Central South University of Technology, 2004, 11(4): 400-404

[9] LiaoX. A., ØyeH. A.. Effects of carbon-bonded coatings on sodium expansion of the cathode in aluminum electrolysis [C]. EDWARD E. Light Metals 1999, 1999, Warrendale, The Minerals, Metals and Materials Society: 629-636

[10] FangJ.Properties study and preparation of wettable inert TiB₂/C composite cathode material for aluminum electrolysis [D], 2004, Changsha, Central South University

[11] LüX.-jun.Study on the electrical conductivity, compressive strength and resistance to sodium penetration of TiB₂-C composite cathode coating [D], 2006, Changsha, Central South University

[12] BrilloitP., LossiusL. P., ØyeH. A.. Penetration and chemical reactions in carbon cathodes during aluminum electrolysis: Part I. Laboratory experiments [J]. Metallurgical Transactions B, 1993, 24B(2): 75-89

[13] SørlieM., ØyeH. A.. Laboratory testing of carbon cathode materials at operational temperatures [C]. CAMPBELL P G. Light Metals 1988, 1988, Warrendale, The Minerals, Metals and Materials Society: 625-631

[14] WikeningS.. Some experiments in cathode carbon [C]. WELCH B. Light Metals 1998, 1998, Warrendale, The Minerals, Metals and Materials Society: 689-693