Advances and expectations of study on wood rheology

Yuan-rong Ma , Ying-she Luo , Xian-jun Li

Journal of Central South University ›› 2010, Vol. 15 ›› Issue (Suppl 1) : 545 -549.

PDF
Journal of Central South University ›› 2010, Vol. 15 ›› Issue (Suppl 1) : 545 -549. DOI: 10.1007/s11771-008-0418-8
Article

Advances and expectations of study on wood rheology

Author information +
History +
PDF

Abstract

By studying and summarizing the characteristics of wood rheology, the mathematic models of creep and mechano-sorptive creep of wood were analyzed. Rheology behaviors in process, especially drying stress and deformation set were discussed. Application of wood rheology in woodcraft process was elaborated and the research prospects and orientation were forecasted.

Keywords

wood rheology / creep / mechano-sorptive creep / drying stress / deformation set

Cite this article

Download citation ▾
Yuan-rong Ma, Ying-she Luo, Xian-jun Li. Advances and expectations of study on wood rheology. Journal of Central South University, 2010, 15(Suppl 1): 545-549 DOI:10.1007/s11771-008-0418-8

登录浏览全文

4963

注册一个新账户 忘记密码

References

[1]

WangF.-hu.The rheology of wood materials [M], 2005, Harbin, North-east Forestry University Press: 11-15

[2]

DiaoH.-l., LiangB.-zhao.. Creep characteristic constants of woods of Pinus masoniana and Eucalyptus urophyllo camaldulensis [J]. Guangxi Sciences, 2003, 10(2): 150-153

[3]

ShaoZ.-ping.. The study on variable coefficients rheological model of wood [J]. Scientia Silvae Sinicae, 2003, 39(3): 106-110

[4]

ArmstrongL. D., KingstonR. S. T.. Effect of moisture changes on creep of wood [J]. Nature, 1960, 185: 862-863

[5]

SalinJ. G.. Numerical predication of checking during timber drying and a new mechano-sorptive creep model [J]. Holz.als Roh-und Werkstoff, 1992, 50(5): 195-200

[6]

ChangJ.-m., HuS.-tao.. Study on non-contact method for measuring drying stresses of wood [J]. China Forestry Products Industry, 1998, 25(5): 7-10

[7]

LiD.-g., GuL.-bai.. Study on rheological behavior of surface layer of poplar during high-temperature drying [J]. Scientia Silvae Sinicae, 1999, 35(1): 83-89

[8]

ChenT.-an.. Rheology behavior during conditioning of Eucalyptus camaldulensis lumber in laboratory kiln [J]. Scientia Silvae Sinicae, 2007, 43(3): 84-89

[9]

DiaoX.-m., HeL.-zhi.. Study on drying stress of hardwood timber [J]. Forestry Science & Technology, 1994, 19(2): 37-41

[10]

TokumotoM.. Casehardening and drying set in the kiln-drying of wood III, Changes of set in slices from the outside to the center of wood pieces during conditioning [J]. Mokuzai Gakkaishi, 1989, 35(3): 392-399

[11]

LiuY.-an.. The mathematics models of wood-drying stress [J]. Journal of Northeast Forestry University, 1998, 26(5): 56-59

[12]

HuC.-kun.. Preliminary exploration on the detection method of stress and strain in the process of wood drying [J]. Journal of Anhui Agri Sci, 2008, 36(6): 2323-2326

[13]

GONG Ren-mei, WANG Li-yu. Effect of vapor treatment on dry wood stress [J]. Forestry Science & Technology, 21(5): 40–42. (in Chinese)

[14]

ChengW.-l., LiuY.-xing.. Characteristics of shrinkage stress of wood during drying under high temperature and high pressure steam conditions [J]. Journal of Beijing Forestry University, 2005, 27(2): 101-106

[15]

TakanoriA.. Recovery of wood after mechano-sorptive deformation. II. Effects of drying conditions while clamped [J]. Mokuzai Gakkaishi, 1979, 25(7): 469-475

[16]

ShuichiK.. Computation of drying stresses resulting from moisture gradients in wood during drying I. Computative method [J]. Mokuzai Gakkaish, 1979, 25(2): 103-110

[17]

TokumotoM.. Creep and set of wood in the non-equilibrium states of moisture [J]. Mokuzai Gakkaishi, 1994, 40(11): 256-264

[18]

LidaI., NorimotoM.. Recovery of compression set [J]. Mokuzai Gakkaishi, 1987, 33(12): 929-933

[19]

NORIMOTO M. Wood bending utilizing microwave heating [J]. Journal of the society of rhelogy, 1980(4): 166–171.

[20]

NORIMOTO M. Wood bending of Sugi and Hinoki from the thinning operation [J]. Wood Research, 1983(18): 93–102.

[21]

InoueM., NorimotoM.. Surface compression of coniferous wood lumber II: Permanent set of compression wood by low molecular weight phenolic resin and some physical properties of the products [M]. Mokuzai Gakkaishi, 1991, 37(3): 227-233

[22]

NorimotoM.. Surface compression of coniferous wood lumber III: Permanent set of the surface compressed layer by a water solution of low molecular weight phenolic resin [J]. Mokuzai Gakkaishi, 1991, 37(3): 234-240

[23]

DwiantoW., InoueM.. Misato Norimoto. Fixation of compressive deformation by heat treatment [J]. Mokuzai Gakkaishi, 1997, 43(4): 303-309

[24]

ZhouL., LuX.-n., DingH.. Effect of hydrothermal treatment on londitudinal compression properties of poplar [J]. Journal of Nanjing Forestry University, 2008, 32(1): 61-64

[25]

XieG.-j., LiuL.. Research of heat treatment on masson pine [J]. Guangxi Forestry & Technology, 2007, 23(4): 6-10

[26]

WangJ.-y., ZhaoG.-jie.. Creep of compressed wood of Chinese fir heat treated in air. [J]. Journal of Beijing Forestry University, 2002, 24(2): 52-58

[27]

LiJ., LiuY.-xing.. Study on the fixation of compressive deformation of wood in the transverse direction by high temperature steam treatment [J]. Journal of Northeast Forestry University, 2000, 28(4): 4-8

[28]

LiD.-g., LiJ.. Effects of heat treatment on permanent fixation bending deformation in wood of fraxinus mandshurica [J]. Journal of Nanjing Forestry University, 2004, 28(3): 23-26

[29]

LiY.-j., TangR.-qiang.. The preliminary study on high temperature heat-treatment technology of wood [J]. China Forest Products Industry, 2008, 35(2): 16-18

[30]

XieM.-h., ZhaoG.-jie.. Structural change of wood molecules and chemo-rheological behavior during chemical treatment [J]. Scientia Silvae Sinicae, 2005, 41(3): 158-162

AI Summary AI Mindmap
PDF

95

Accesses

0

Citation

Detail

Sections
Recommended

AI思维导图

/