Mapping analysis of vibrating fundamental frequency for simple-supported elastic rectangle-plates with concentrated mass

Abstract

By conformal mapping theory, a trigonometric interpolation method between odd and even sequences in rectangle boundary region was provided, and the conformal mapping function of rectangle-plate with arc radius between complicated region and unite dish region was carried out. Aiming at calculating the vibrating fundamental frequency of special-shaped, elastic simple-supported rectangle-plates, in the in-plane state of constant stress, the vibration function of this complicated plate was depicted by unit dish region. The coefficient of fundamental frequency was calculated. Whilst, taking simple-supported elastic rectangle-plates with arc radius as an example, the effects on fundamental frequency caused by the concentrated mass and position, the ratio of the length to width of rectangle, as well as the coefficient of constant in-plane stress were analyzed respectively.

Keywords

conformal mapping / elastic simple-supported plates / vibration / fundamental frequency / mode / method of trigonometric interpolation

References

[1] WangD. J.. Natural vibration of repetitive structure[J]. The Chinese Journal of Mechanics, 2000, 16(2): 85-95

[2] ClouhR. W.Dynamics of Structure[M], 1993, New York, McGraw-Hill Inc

[3] KaplunvoJ. D.. A Perturbation approach evaluating natural frequencies of moderately thick elliptic plates[J]. Journal of Sound and Vibration, 2005, 281: 905-919

[4] WangF.. The limit analysis of irregular reinforced concrete slabs[J]. Journal of Central South University of Technology: Natural Science, 2001, 32(6): 573-576

[5] PanJ.-qi.. Recycling process assessment of mechanical recycling of circuit board[J]. Journal of Central South University of Technology, 2005, 12(S2): 157-161

[6] TeppatiC.. Conformal-mapping design tools for coaxial couplers with complex cross section[J]. IEEE Transactions on Microwave Theory and Techniques, 2002, 50(10): 2339-2345

[7] RajalinghamC.. Axisymmetric vibration of circular plates and its analog in elliptical plates using characteristic orthogonal polynomials[J]. Journal of Sound and Vibration, 1993, 161: 109-118

[8] AmatoreC.. Simulation of the double hemicylinder generator-collector assembly through conformal mapping technique[J]. Journal of Electro-analytical Chemistry, 2003, 553(S): 49-61

[9] WuG.-chuan.Tandem Blade Cascade[M], 1996, Beijing, National Defense Industry Press

[10] ZouJ.-bin.Magnetic Circuit and Magnetic Field[M], 1998, Harbin, Harbin Industry University Press

[11] CrandallS.Engineering Analysis[M], 1950, New York, McGraw-Hill Book Co

[12] QiH.-y., ZhuH.-jun.. Conformal mapping modeling of metal plastic deformation and die cavity in special-shaped extrusion[J]. Trans Nonferrous Metal Soc China, 2002, 12(5): 858-861

[13] LauraP. A. A.. Fundamental frequency of vibration of clamped plates of arbitrary shape subjected to hydrostatic state of in-plane stress[J]. Journal of Sound and Vibration, 1976, 48(3): 327-332

[14] NetkuY.Conformal Field Theory[M], 2000, Cambridge, Massachusetts USA, Perseus Pub

[15] QiH.-y., ZhuH.-jun.. Analysis of metal forming and 3D die cavity in special/shaped extrusion[C]. Proceeding of Chinese Postdoctoral Academic Conference, 2001, Beijing, Science Press: 484-488