Effects of cryogenic treatment on mechanical properties of extruded Mg-Gd-Y-Zr(Mn) alloys

Abstract

The influence of cryogenic treatment on the mechanical properties of the extruded Mg-Gd-Y-Zr(Mn) alloys was investigated by the tensile tests, scanning electron microscopy(SEM), transmission electron microscopy(TEM), and energy dispersive X-ray spectroscopy (EDS). The results show that the mechanical properties of both alloys are improved greatly during the in situ tensile test by soaking the samples in liquid nitrogen for 10 min. The ultimate tensile strength, yield tensile strength and elongation of cryogenic treated magnesium alloy added with zirconium or manganese are largely elevated. And remarkable microstructure change is observed in both alloys by cryogenic treatment. There are a large number of twins, rod-like, tree-like and chrysanthemum-like precipitated phases in the microstructures and the fracture surfaces exhibit the characteristics of ductile rupture when they are observed at room temperature.

Keywords

magnesium alloy / cryogenic treatment / mechanical property / microstructure

References

[1] AppsP. J., KarimzadehH., KingJ. F., et al.. Precipitation reactions in magnesium-rare earth alloys containing yttrium, gadolinium or dysprosium[J]. Scripta Materials, 2003, 48: 1023-1028

[2] SmolaB., StulikovaI., Von BuchF., et al.. Structural aspects of high performance Mg alloys design[J]. Materials Science and Engineering, 2002, A324: 113-117

[3] AnyanwuI. A., KamadoS., KojimaY.. Aging characteristics and high temperature tensile properties of Mg-Gd-Y-Zr alloys[J]. Materials Transactions, 2001, 42(7): 1206-1211

[4] RokhlinL. L., NikitinaN. I.. Recovery after ageing of Mg-Y and Mg-Gd alloys[J]. Journal of Alloys and Compounds, 1998, 279: 166-170

[5] MordikeB. L.. Creep-resistant magnesium alloys[J]. Materials Science and Engineering, 2002, A324: 103-112

[6] AnyanwuI. A., KamadoS., KojimaY.. Creep properties of Mg-Gd-Y-Zr alloys[J]. Materials Transactions, 2001, 42(7): 1212-1218

[7] ZhangX.-m., ChenJ.-m., DengY.-l., et al.. Deformation behavior of Mg-Gd-Y-Zr heat resistant magnesium alloy during hot-compression[J]. Chinese Journal of Nonferrous Metals, 2005, 15(12): 1925-1932

[8] ChenJ.-m., ZhangX.-m., DengY.-l., et al.. Microstructure and mechanical properties of a Mg-9Gd-4Y-0.65Mn alloy processed by thermo-mechanical treatment[J]. Journal of Aeronautical Materials, 2006, 26(2): 1-7

[9] AnyanwuA. I., KamadoS., KojimaY.. Aging characteristics and high temperature tensile properties of Mg-Gd-Y-Zr Alloys[J]. Materials Transaction, 2001, 42(7): 1206-1211

[10] NegishiY., NishimuraT., IwasawaS., et al.. Aging characteristics and tensile properties of Mg-Gd-Nd-Zr alloys[J]. Light Metal, 1994, 44(10): 555-561

[11] KawabataT., MatsudaK., KamadoS., et al.. HRTEM observation of the precipitates in Mg-Gd-Y-Zr alloy[J]. Materials Science Forum, 2003, 419/422: 303-306

[12] TaniikeS., KitaquchiY.. Forgeability of Mg-heavy rare earth metal alloys and aging characteristics and tensile properties of their forged material[J]. Journal of Japan Institute of Light Metals, 1997, 47(5): 261-266

[13] WebsterD.. The effect of low melting point impurities on the properties of aluminum-lithium alloys[J]. Metall Trans, 1987, 18A(12): 2181-2193

[14] GlazerJ., VerzasconiS. L., DalderE. N., et al.. cryogenic mechanical properties of Al-Cu-Li-Zr alloy 2090[J]. Advances in Cryogenic Engineering, 1986, 32: 397-404

[15] GlazerJ., VerzasconiS. L., SawtellR. T., et al.. Mechanical behavior of aluminum-lithium alloys at cryogenic temperatures[J]. Metall Trans, 1987, 18A(10): 1695-1701

[16] JataK. V.. Fracture toughness of Al-Li-X alloys at ambient and cryogenic temperatures[J]. Scripta Met, 1988, 22(9): 1553-1556

[17] ChenJ.-m., ZhangX.-m., DengY.-l., et al.. Thermodynamics of melding and refining of magnesium alloys[J]. Journal of Central South University: Science and Technology, 2006, 37(3): 427-432