Pore structure of ore granular media by computerized tomography image processing

Abstract

The pore structure images of ore particles located at different heights of leaching column were scanned with X-ray computerized tomography (CT) scanner, the porosity and pore size distribution were calculated and the geometrical shape and connectivity of pores were analyzed based on image process method, and the three dimensional reconstruction of pore structure images was realized. The results show that the porosity of ore particles bed in leaching column is 42.92%, 41.72%, 39.34% at top, middle and bottom zone, respectively. Obviously it has spatial variability and decreases appreciably along the height of the column. The overall average porosity obtained by image processing is 41.33% while the porosity gotten from general measurement method in laboratory is 42.77% showing the results of both methods are consistent well. The pore structure of ore granular media is characterized as a dynamical space network composed of interconnected pore bodies and pore throats. The ratio of throats with equivalent diameter less than 1.91 mm to the total pores is 29.31%, and that of the large pores with equivalent diameter more than 5.73 mm is 2.90%.

Keywords

ore granular media / pore structure / X-ray computerized tomography / image processing

References

[1] MaJ.-w., WuA.-x., TangX.-c., et al.. Study of pore evolvement model of one ore granular media in heap leaching technology[J]. Hunan Nonferrous Metals, 2004, 20(4): 4-6

[2] SheikhzadehG. A., MehrabianM. A., MansouriS. H., et al.. Computational modeling of unsaturated flow of liquid in heap leaching—using the results of column tests to calibrate the model[J]. Heat and Mass Transfer, 2005, 48(7): 279-292

[3] Sanchez-ChaconA. E., LapidusG. T.. Model for heap leaching of gold ores by cyanidation[J]. Hydrometallurgy, 1997, 44(3): 1-20

[4] LinC. L., MillerJ. D., GarciaC.. Saturated flow characteristics in column leaching as described by LB simulation[J]. Minerals Engineering, 2005, 18(3): 1045-1051

[5] MillerJ. D., LinC. L., GarciaC., et al.. Ultimate recovery in heap leaching operations as established from mineral exposure analysis by X-ray microtomography[J]. Mineral Processing, 2003, 72(1): 331-340

[6] YangG.-she.. Rock damage and CT detecting technology[J]. The Journal of Xi’an Mining Industry College, 1997, 9(3): 195-198

[7] WildenschildD., HopmansJ. W., VazC. M. P., et al.. Using X-ray computed tomography in hydrology: systems, resolutions, and limitations[J]. Journal of Hydrology, 2002, 267(9): 285-297

[8] BartlettR. W.Solution Mining: Leaching and Fluid Recovery of Materials[M], 1998, New York, Gordon and Breach Science Press: 33-34

[9] ZhuH.The Base of Digital Image Processing[M], 2005, Changsha, Science Press

[10] MeckeK., ArnsC. H.. Fluids in porous media: a morphometric approach[J]. Journal of Physics, 2005, 17(2): 503-534

[11] WuA.-x., SunY.-z., LiuX.-ping.The Theory and Application of Granular Dynamics[M], 2002, Changsha, Metallurgy Industry Press: 7-8

[12] LinC. L., MillerJ. D.. Network analysis of filter cake pore structure by high resolution X-ray microtomography[J]. Chemical Engineering Journal, 2000, 77(7): 79-86

[13] CoskunS. B., WardlawN. C.. Influences of pore geometry, porosity and permeability on initial water saturation: an empirical method for estimating initial water saturation by image analysis[J]. Petroleum Science and Engineering, 1995, 12(4): 295-308

[14] ChenS.-r., WangD.-j., ZhangX.-wu.. The application of network model of porous media’s pore structure[J]. Computer and Applied Chemistry, 2001, 18(6): 531-535