Heating and melting mechanism of stainless steelmaking dust pellet in liquid slag

Abstract

The heating and melting mechanisms of the pellets immersed in liquid slag were investigated, and the effect of the pellet heating and the melting conditions were studied. The results show that the dust component in the pellet is melted from the surface and no metallic elements are melted before the dust component, the time for the pellet completely melted is reduced as the iron powder content increases since the metallic iron has high thermal conductivity. These are four stages of heating and melting of pellet in liquid slag, they are the growth and melt of solid slag shell, penetration of liquid slag, dissolving of dust component and melting of reduced metals. The lifetime of the solid slag shell is in the range of 7–16 s and increasing the pre-heating temperature of the pellet and the slag temperature can shorten the slag shell lifetime. The time for the dust component in the pellet to be melted completely is in the range of 20–45 s and increasing the pre-heating temperature, especially in the range of 600–800 °C, can obviously reduce the melting time. A higher slag temperature can also improve the pellet melting and the melting time is reduced by 10–15 s when the slag temperature is increased from 1 450 to 1 550 °C. The pellet with higher content of iron powder is beneficial to the melting by improving the heat conductivity.

Keywords

heating / melting / mechanism / stainless steelmaking dust / recycling

References

[1] ZunkelD.. What to do with your EAF dust[J]. Steel Times International, 1996, 20(4): 46-50

[2] US Environmental Protection Agency. Federal Register, 56, 41164,. Land disposal restriction for electric arc furnace dust[S]. 1991-08-19

[3] CyroT., LuizC. F., DenerM. D. S., et al.. Recovery of Cr, Ni and Fe from dust generated in stainless steelmaking[J]. Transactions of the Institutions of Mining and Metallurgy, Section C: Mineral Processing and Extractive Metallurgy, 2005, 114(11): 201-206

[4] NolascoS. P. J., RomanoE. D. C., BredaM. M., et al.. Bench scale study of the chromium and nickel recovery from dusts and sludges generated in stainless steelmaking[C]. Proceedings of TMS 2005 Annual Meeting, 2005, California, Mineral, Metallurgical and Materials Society of TMS: 989-995

[5] LobelJ., PengB., BourassaM., et al.. Pilot-scale direct recycling of flue dust generated in electric stainless steelmaking[J]. Iron and Steelmaker, 2000, 27(1): 41-45

[6] PengB., PengJ., ZhangC.-f., et al.. Thermodynamics calculation on the oxidation and sulfur removal ability of slag in EAF dust pellet reduction process [J]. Journal of Central South University of Technology, 2001, 8(1): 64-68

[7] PengB., PengJ., KozinskiJ. A., et al.. Thermodynamic calculation on the smelting slag of direct recycling of electric arc furnace stainless steelmaking dust[J]. Journal of Central South University of Technology, 2003, 10(1): 20-26

[8] SouzaN. D., KozinskiJ. A., SzpunarJ. A.. EAF stainless steel dust, characteristics and potential metal immobilization by thermal treatment[C]. International Symposium on Resource Conservation and Environmental Technology in the Metallurgical Industry, 1998, Alberta, Metallurgical Society of CIM

[9] PengJ., PengB., YuD., et al.. Thermo-analytical study of stainless steelmaking dust [J]. Journal of Central South University of Technology, 2003, 10(4): 301-306

[10] PengJ., PengB., YuD., et al.. Kinetics of isothermal reduction of stainless steelmaking dust pellets[J]. Trans Nonferrous Met Soc China, 2004, 14(3): 593-598

[11] ZhangC.-f., PengB., PengJ., et al.. Electric arc furnace dust non-isothermal reduction kinetics[J]. Transactions of Nonferrous Metals, 2000, 10(4): 524-530

[12] PengB., LobelJ., KozinskiJ. A., et al.. Non-isothermal reduction kinetics of EAF dust-based pellets[J]. CIM Bulletin, 2001, 94(1049): 64-70

[13] MerissnerS., KobayashiI., TanigakiY., et al.. Reduction and melting model of carbon composite ore pellets[J]. Ironmaking and Steelmaking, 2003, 30(2): 170-176

[14] CLEARY P W, STOKES N, PRAKASH M, et al. Simulation of reactive pellets in a pyrometallurgical bath using SPH[C]// Proceedings of the Minerals, TMS Annual Meeting. San Francisco, 2005: 647–654

[15] PengB., PengJ., YuDi.. Modeling of thermal conductivity of stainless-steelmaking dust pellets[J]. Trans Nonferrous Met China, 2004, 14(1): 184-189

[16] DingY. L., WarnerN. A., MerchantA. J.. Mathematical modeling of the reduction of carbon-chromite composite pellets[J]. Scandinavian Journal of Metallurgy, 1997, 26(1): 1-8

[17] AkiyamaT., OhtaH., TakahashiR., et al.. Measurement and modeling of thermal conductivity for dense iron oxide and porous iron ore agglomerates in stepwise reduction[J]. The Iron and Steel Institute of Japan International, 1992, 32(7): 829-837