Preparation of adhesive for bamboo plywood using concentrated papermaking black liquor directly

Abstract

Adhesive for bamboo plywood prepared directly using lignin existing in the black liquor as a kind of material replacing phenol was proposed on the basis of the same structural properties of lignin and phenol. The results indicate that the reaction time of black liquor methylating is 30 min, when the ratio of alkali to formaldehyde is controlled at approximately 0.20, decomposition rate of formaldehyde is the lowest and the effect of black liquor methylating is the best, the optimal molar ratio of phenol: formaldehyde to NaOH to H₂O of preparing phenolic resin is 1.00 : 1.50 : 0.50 : 9.00, and the suitable viscosity is 27–30 Pa · s. At different mass ratios of methylated black liquor to phenolic resin, all terms of performance of black liquor phenolic resin are excellent and satisfy the requirement. All terms of performance of bamboo plywood prepared using this technique are better than that of excellent bamboo plywood of national criteria. Using this technique, the cost is depressed by 28.69% without altering the traditional adhesive producing technique flow, and without using additional equipment.

Keywords

papermaking black liquor / lignin / bamboo plywood / adhesive

References

[1] ZhouSi-yi, LuoYi. Analysis and evaluation of pollution treatment techniques of small-scale straw pulp mills in China [J]. Research of Environmental Sciences, 1999, 12(5): 24-26(in Chinese)

[2] YangWen-bo, MuHuan-zhen, HuangYan-chu. Treatment of black liquor from the papermaking industry by acidification and reuse[J]. Journal of Environmental Sciences, 2003, 15(5): 697-700

[3] RenXin. Cleaner production in China’s pulp and paper industry[J]. Journal of Cleaner Production, 1998, 6(3 – 4): 349-355

[4] HUANG Wei-ping, HE Yu-tian, XIE Guo-quan, et al. A technique of papermaking waste water treatment reagent and applying it to treat papermaking waste wateri: CN, 1183384A[P]. 1998 - 06 - 03. (in Chinese)

[5] TangXin-de. Discussion on treatment and reuse of black papermaking liquor [J]. Environmental Engineering, 1995, 13(2): 10-13(in Chinese)

[6] AtakeltyH, TerrenceS V. Environmentally sensitive productivity analysis of the canadian pulp and paper industry, 1959 – 1994: An input distance function approach[J]. Journal of Environmental Economics and Management, 2000, 40(3): 251-274

[7] QinYi-hong, WangYun-yan, ShuYu-de. Recovery of lignin from black liquor of paper-making by acidulation method[J]. Environmental Pollution and Prevention, 1999, 21(4): 5-7(in Chinese)

[8] ZhangKe, ZhouEn-yiSynthetical utilization and pollution prevention technique of braized waste water in papermaking industry[M], 1992, Beijing, Light industry Press(in Chinese)

[9] PanXue-jun, HuHui-ren, XieLai-su, et al.. Preparation of flakeboard adhesive using straw pulp black liquor treated by superfiltration[J]. Forestry Industry, 1994, 21(3): 35-37(in Chinese)

[10] XIE Guo-quan, ZHANG Song-ting, XIE Bing-nan. Preparation of adhesive using braizing ball waste water of papermaking industry: CN, 1056311A[P]. 1991 - 11 - 20. (in Chinese)

[11] JIANG Zhong-dao, XU Yuan-chun. Preparation of plywood using alkaline lignin or lignin sulphurate adhesive[J]. China Lumber, 1992(3): 24–25. (in Chinese)

[12] BaiXue-song. Research, application and development on wood adhesive component using north American lignin replacing phenol[J]. World woods Research, 1993, 6(1): 83-85(in Chinese)

[13] QIU Xue-qing, LOU Hong-ming. The developments in the study of the application of lignin-based water treatment chemicals [J]. Environmental Protection, 1999(6): 45–47. (in Chinese)

[14] LiuQi-ming, XuChang-yan, LuZhong-quan. Research of black liquor producing adhesive for plywood [J]. China Adhesive, 1996, 5(1): 15-18(in Chinese)

[15] WANG Min-yuan. Study on preparation of first class adhesive for plywood using sulphate straw pulp black liquor[J]. Ningxia Light Industry Science and Technology, 1981(2): 33–43. (in Chinese)