Preparation of FVS1212/FVS0812 materials and its mechanical properties

Abstract

FVS1212/FVS0812 material was prepared by adding FVS1212 powder into FVS0812 powder. The structure and mechanical properties of materials were studied by means of X-Ray, tensile measurement, OM and SEM. The results show that adding proper content FVS1212 powders can improve the tensile strength of FVS0812 aluminum at room temperature and elevated temperature, and that the elongation of FVS1212/FVS0812 material is better than that of FVS1212 aluminum.

Keywords

powder-metallurgy / FVS0812/FVS1212 material / elevated temperature strength

References

[1] Skinner D J, Flanders N J, Chipko P A. Aluminum-transition metal alloys having high strength at elevated temperatures[P]. US5000781, 1991-03-19.

[2] Skinner D J, Zedalis M S. Aluminum iron silicon based elevated-temperature aluminum alloy[P]. US 5,073,215, 1991-02-17.

[3] SkinnerD J, ByeR L, RaybouldD, et al.. Dispersion strengthened Al-Fe-V-Si alloys[J]. Scripta Metallurgical, 1986, 20: 867-872

[4] SkinnerD J, ZedalisM S, GilmanP. Effect of strain rate on tensile ductility for a series of dispersion strengthened aluminum-based alloys[J]. Materials Science and Engineering, 1989, A119: 81-86

[5] KimI S, KimN J, NamS W. Temperature dependence of the optimum particle size for the dislocation detachment controlled creep of Al-Fe-V-Si/SiCp composite[J]. Scripta Metallurgical et Materials, 1995, 32(11): 1813-1814

[6] TongX C, GhoshA K. Fabrication of in situ TiC reinforced aluminum matrix composites[J]. J Materials Sci, 2001, 36: 4059-4069

[7] HyangJ K, WooJ P, NackJ K. Identification of metastable phases in strip-cast and spray-cast Al-Fe-V-Si alloys[J]. Materials Transactions JIM, 1998, 39(9): 982-988

[8] PengL M, ZhuS J, MaZ Y, et al.. High temperature creep deformation of Al18B4O33 whisker-reinforced 8009 Al composite [J]. Materials Science and Engineering, 1999, A256: 63-70

[9] SunYu-feng, RenChen-xing, ShenNing-fu. Study on the microstructure evolution of spray deposited Al-Fe-V-Si Alloy[J]. Journal of Zhengzhou University of Technology, 2001, 22(4): 17-21

[10] SrivastavaA K, RanganathanS. Microstructural characterization of rapidly solidified Al-Fe-Si, Al-V-Si, and Al-Fe-V-Si alloys[J]. J Mater Res, 2001, 7: 2103-2116

[11] TanDun-qiang, LiWen-xian, XiaoYu-de, et al.. Precipitation phase and thermaldynamic analysis during solidification of AlFeSi system[J]. Trans Nonferrous Soc China, 2003, 13(5): 1133-1136

[12] TanDun-qiang, LiWen-xian, XiaoYu-de, et al.. Phase transition of AlFeVSi heat resistant alloy by spray deposition[J]. Trans Nonferrous Soc China, 2003, 13(3): 568-573