High-temperature corrosion-resistance performance of electro-thermal explosion spraying coating

Abstract

As a new spraying technology used in the remanufacturing engineering, electro-thermal explosion spraying holds a lot of advantages. Electro-thermal explosion spraying coating aliquation phenomena are reduced and non-crystal, micro-crystal and millimicron-crystal and other microstructure are formed. The corrosion-resistance ability of electro-thermal explosion spraying coating in high temperature environment was surveyed respectively. SEM equipped with EDS was employe to analyzed the microstructure of spraying coating before and after corrosion. The corrosion-resistance mechanism of the spraying coating was discussed.

Keywords

high temperature corrosion-resistance / electro-thermal explosion spraying / coating

References

[1] XuB SNano Surface Engineering [M], 2004, Beijing, Chemical Industry Press(in Chinese)

[2] LiuZ D, AnJ Y, YangK. Studies on rapid spraying by electric explosion method [J]. Explosion and Shock Waves, 2001, 21(1): 17-20(in Chinese)

[3] LiuZ D, FengS P, ZhangN. Studies on high heating rates apparatus [J]. Explosion and Shock Waves, 1995, 15(4): 315-321(in Chinese)

[4] LiuZ D, YangK, DuanP, et al.. An experimental study on preparation of WC-Co coatings with the exploding wires technique [J]. Explosion and Shock Waves, 2003, 23(2): 116-121(in Chinese)

[5] TomaD, BrandlW, MargineanG. Wear and corrosion behaviour of thermally sprayed cermet coatings [J]. Surface and Coatings Technology, 2001, 2: 149-158

[6] TamuraH. Generation of a high velocity jet in the electrothermalexplosion of conductive ceramic powders [J]. J Thermal Spray Technology, 1998, 7(1): 87-92

[7] LiM J, SunX F, GuanH R. High temperature oxidation behavior of (Ni, Pd)Al coating [J]. Acta Met-allurgica Sinica, 2003, 39(4): 439-443(in Chinese)

[8] SaravananP, SelvarajanV. Application of taguchi method to the optimization of detonation spraying process [J]. Materials and Manufacturing Processes, 2000, 15(1): 139-153

[9] LiY S, NiuY, WuW T. Chlorination of metallic materials at high temperature [J]. Corrosion Science and Protection Technology, 2000, 12(1): 41-44(in Chinese)

[10] SuY L, LinJ S. Friction and wear behavior of a number of ceramic-coated steels matched as sliding pairs to various surface-treated steels [J]. Wear, 1993, 166: 27-35

[11] SimmsM J, NewtonR, NortonJ F, et al.. Degradation of Fe-Cr-Al-RE and Ni-Cr-Al-RE foils in air and combustion gas atmospheres [J]. Materials at High Temperatures, 2003, 20(3): 439-451

[12] WuY N, WangF H, HuaW G, et al.. Oxidation behavior of thermal barrier coatings obtained by detonation spraying [J]. Surface and Coatings Technology, 2003, 166: 189-194

[13] WangF, GengS. High temperature oxidation and corrosion resistant nanocrystalline coatings [J]. Surface Engineering, 2003, 19(1): 32-36 in Chinese)

[14] WangH B, LiM S, HanZ. High temperature corrosion mechanism for smoke pipe of ship [J]. Materials Protection, 2002, 35(9): 7-9(in Chinese)

[15] LiM SHigh Temperature Corrosion of Metal [M], 2001, Beijing, Metallurgical Industry Press(in Chinese)