Developing remanufacturing engineering, constructing cycle economy and building saving-oriented society

Abstract

In the course of creating immense wealth, manufacturing industry has excessively consumed the resources and energy in the earth, and seriously polluted the environment. To take progress as the sustainable development way, save resource and improve environment, our nation has been advocating to construct the cycle economy and saving-oriented society. Taking the remanufacturing engineering as the representative, the “4R” rule (Reduce, Reuse, Recycle and Remanufacture) is the important measure to get the goal. Remanufacturing engineering is the industrialization of high-tech maintenance of the waste and worn productions, and is one of the most active factors in “4R”. The development of high and new technology takes the important effect to promote the remanufacturing engineering.

Keywords

remanufacturing engineering / cycle economy / saving-oriented society / high technology / industrial development

References

[1] Pei S, Tian X M. Analysis to the vehicle reclaiming and remanufacturing [J]. Integrated Usage of China Resources, 2001(9): 25–28. (in Chinese)

[2] LiH. Integrated treatment to the waste computer [J]. Science of Environment Protection, 2002, 28(11): 28-29(in Chinese)

[3] JiangY. The disposition issues of waste electroproductions were paid attention by USA [J]. China Environment Science, 2002, 22(2): 350-351(in Chinese)

[4] XuK D. Engineers: from the creators of material wealth to the practitioners of sustainable development [J]. China Surface Engineering, 2004, 17(6): 1-6(in Chinese)

[5] Xu B S. Application Foreground of Green Remanufacturing Engineering in China [M]. Consultative Report of China Academy of Engineering, 2000, 12. (in Chinese)

[6] Robot T L. The Remanufacturing Industry-Hidden Giant [D]. Manufacturing Engineering Department, Boston University, 1996.

[7] DanielV R, GuideJ. Production planning and control for remanufacturing: industry practice and research needs [J]. Journal of Operations Management, 2000, 18: 467-483

[8] MeiS W, YangJ S, ZhangF X. Analysis of quality and benefit of remanufacturing of caterpillar tractors [J]. China Surface Engineering, 2002, 15(3): 9-13(in Chinese)

[9] Xu B S, Zhang Z X. Surface engineering and remanufacturing technology [A]. International Conference on Advanced Manufacturing Technology’99 [C]. Xi’an, 1999. 1129–1132.

[10] Xu B S, Zhang W. Study on the remanufacturing engineering technologies oriented 21th century [A]. Proceedings of frontiers and prior directions in Mechanical Devision of NSFC [C]. Guangzhou, 1999. 12. (in Chinese)

[11] Xu B S, Zhang W, Liu S C, et al. Remanufacturing technology for the 21st century [A]. Proceedings of the 15th European Maintenance Conference, Mar 2000 in Gothenburg [C]. Sweden, 2000. 335–339.

[12] XuB S, ZhuS, LiangX B, et al.. Key technologies of materials processing of green remanufacturing engineering and their foundation [A]. Materials Processing Technology and Science in 21th Century [C], 2004, Beijing, China Machine Press: 216-227(in Chinese)

[13] Xu B S, Dong S Y. Application of laser processing technology in remanufacturing engineering and the prospect [A]. The 210th Symposium of Fragrant Hill Science Conference [C]. 2003, 9. (in Chinese)

[14] XuB S, WangH D, DongS Y, et al.. Electrodepositing nickel silica nano-composites coatings [J]. Electrochemistry Communications, 2005, 7(6): 572-575

[15] XuB S, ZhuZ X, ZhangW, et al.. Sliding wear behavior of Fe-Al and Fe-Al/WC coatings prepared by high velocity arc spraying [J]. Wear, 2004, 257(11): 1089-1095