Study on increasing calculation precision and convergence speed of streamline strip element method

Abstract

The calculation precision and convergence speed of streamline strip element method are increased by using the method whose initial value of the exit lateral displacement is determined with strip element variation method, and the accurate tension lateral distribution model is adopted based on the original third power spline function streamline strip element method. The basic theory of the strip element method is developed. The calculated results by the improved streamline strip element method and the original streamline strip element method are compared with the measured results, showing that the calculated results of the improved method are in good agreement with the measured results.

Keywords

streamline strip element method / tension / exit lateral displacement

References

[1] LianJia-chuang, DuanZhen-yong, YeXing. Analysis of lateral flow of metal in roll gags with three-dimensional finite difference method [J]. Journal of Northeast Heavy Machinery Institute, 1984, 8(3): 1-10(in Chinese)

[2] LiuCai, DuFeng-shan, LianJia-chuang. The deformation and stress fields of sheet in continuous rolling [J]. Chinese Journal of Mechanical Engineering, 1992, 28(1): 104-108(in Chinese)

[3] LiuXiang-hua, JiangZheng-yi, WangGuo-dongWangZhong-ren, HeYu-xin. Analysis of 3-D deformation for crown strip rolling by rigidplastic FEM [A]. Advanced Technology of Plasticity[C], 1993, Beijing, International Academic Press: 701-707

[4] LiuHong-minThe theory of 3-D rolling and its application [M], 1999, Beijing, Science Press(in Chinese)

[5] LiuHong-min, LianJia-chuang. Transverse distribution of front and back tension stresses in cold strip rolling [J]. Chinese Journal of Metal Science and Technology, 1992, 8(6): 427-434(in Chinese)

[6] XiaoHong, ShenGuang-xian, LianJia-chuang. Simulation of rolling processes by the boundary element method of elastic plastic finite deformation problems [J]. Chinese Journal of Mechanical Engineering, 1994, 30(S): 40-45(in Chinese)

[7] LiuHong-min, LianJia-chuang, DuanZhen-yong. Strip element method for simulating strip rolling process [J]. Chinese Journal of Mechanical Engineering, 1993, 29(4): 36-42(in Chinese)

[8] LiuHong-min, LianJia-chuang. Linear strip element method for analyzing lateral flow of metal and transverse distributions of tension stresses of cold rolled strip [J]. Journal of Iron and Steel Research, 1992, 4(3): 37-44(in Chinese)

[9] LiuHong-min, ZhenZheng-zhong, PengYan. Streamline strip element method for analysis of the three-dimensional stresses and deformations of strip rolling [J]. International Journal for Numerical Methods in Engineering, 2001, 50(5): 1059-1076

[10] ZhenZheng-zhong, PengYan, LiuHong-min. A new strip element variation method for analyzing lateral flow of metal and transverse distribution of front tension stress of cold rolled strip [J]. Journal of Iron and Steel Research, 1999, 11(5): 21-25(in Chinese)

[11] PengYanTheoretical Studies and Engineering Application of Shape Preset Control for HC Cold Mill Based on Strip Element Method [D], 2000, Qinhuangdao, Yanshan University(in Chinese)