Maximum twin shear stress factor criterion for sliding mode fracture initiation

Abstract

Previous researches on the mixed mode fracture initiation criteria were mostly focused on opening mode fracture. In this study, the authors proposed a new criterion for mixed mode sliding fracture initiation, which is the maximum twin shear stress factor criterion. The authors studied a finite width plate with central slant crack, subject to a far-field uniform uniaxial tensile or compressive stress.

Keywords

twin shear stress factor / sliding mode / fracture initiation criterion / the finite width plate

References

[1] ErdoganF, SihG C. On the crack extension in plates under plane loading and transverse shear [J]. J of Basic Eng, 1963, 85(4): 519-527

[2] HussainM A, PuS L, UnderwoodJ. Strain energy release rate for a crack under combined mode I and mode II [J]. ASTM, 1974, 560: 2-28

[3] SihG C. Strain energy density factor applied to mixed crack problems[J]. Int J Fract, 1974, 10(3): 305-321

[4] IzumiMFracture toughness of concrete for mode II [M], 1986, Amsterdam, Elsevier Science Publishers: 347-354

[5] WangGuiyao, SunZongqi, LiZhenzi. General behaviour of mode II crack propagation in rock[J]. J Cent South Inst Min Metall, 1994, 25(4): 450-454(in Chinese)

[6] LiZhenziElementary engineering fracture mechanics (in Chinese) [M], 1990, Changsha, Central South University of Technology Press

[7] YuMaofengTwin shear theory and its application (in Chinese) [M], 1998, Beijing, Science Press