Massic heat capacities of ammonium penta- and tetra- molybdates

Abstract

Single phases of ammonium penta- and tetra- molybdates were prepared. The massic heat capacities at normal pressure below their decomposition temperatures were measured by drop method. The relationships of the massic heat capacities of ammonium molybdates with those of the decomposition products were also discussed. The results show that the massic heat capacities of ammonium molybdates can be estimated by adding together contributions from their decomposition products, and the less change of chemical bonds, the more accurate of the estimation.

Keywords

massic heat capacity / ammonium pentamolybdate / ammonium tetramolybdate / drop method

References

[1] QiYing-ben, WangJin-fa, DingZhi-hu, et al.. Study on the crystalline of ammonium tetramolybdates[J]. Rare Metals, 1986, 10(3): 207-209(in Chinese)

[2] YinZhou-lanThe effect of the physical and chemical properties and pretreatment on the forms of the molybdenum powder, 1994, Changsha, Central South University of Technology(in Chinese)

[3] YinZhou-lan, ChenQi-yuan, ZhangHeng-zhong, et al.. Measurement of the heat capacity of ammonium tetramolybdate in the micro powder form[J]. Acta Physico-Chemica Sinica, 1997, 13(5): 455-458(in Chinese)

[4] DitmarsD A, IshiharaS, ChangS S, et al.. Enthalpy and heat capacity of standard reference material: synthetic sapphire (α-Al₂O₃) from 10 K to 2250 K[J]. Journal of Research of the National Institute of Standards & Technology, 1982, 87(2): 159-164

[5] Mezaki R, Tilleux E W. Thermodynamics of nuclear materials[A]. Proc IAEA Symposium Vienna[C]. Vienna, 1962. 775.

[6] KubaschewskiO, AclockC BMetallurgical thermochemistry (5th edition)[M], 1979, New York, Pergamon Press: 180-180

[7] Barin I, Knacke O. Thermochemical properties of inorganic substances[M]. Springer-Verlag, 1993.