Investigation on the morphology of martensite in carbon steels

Yuehui He , Qiuhua Rao , Yuhua Tan

Journal of Central South University ›› 1996, Vol. 3 ›› Issue (2) : 122 -134.

PDF
Journal of Central South University ›› 1996, Vol. 3 ›› Issue (2) : 122 -134. DOI: 10.1007/BF02652191
Article

Investigation on the morphology of martensite in carbon steels

Author information +
History +
PDF

Abstract

The effect of carbon content on the morphology of martensite in carbon steels has been studied in depth. It is found that not all the packet martensites obtained in carbon steels quenched from elevated temperature are lath martensite. The packet martensite obtained thus should be divided into two categories: packet thin plate martensite (i. e. lath martensite) and packet plate martensite. The former is only found in low carbon steels, the latter mainly in medium and high carbon steels. The morphology of martensite in steels with different carbon contents has been researched in detail using optical microscopy, SEM and TEM. A new criterion is proposed for identifying the category of martensite. Based on this new criterion, it is found that as-quenched steels withCc⩽0.2% contains lath martensite; that with 0.2%<Cc<0.4% contains a mixture of lath and plate martensite. The structure of as-quenched steels withCc⩾0.4% is completely of plate martensite. The curve of the relative volume percentage of martensite without internal twins versus carbon content has been redetermined. Finally, the misinterpretation of experimental results by previous investigators is analysed.

Keywords

martensite / morphology / carbon content

Cite this article

Download citation ▾
Yuehui He, Qiuhua Rao, Yuhua Tan. Investigation on the morphology of martensite in carbon steels. Journal of Central South University, 1996, 3(2): 122-134 DOI:10.1007/BF02652191

登录浏览全文

4963

注册一个新账户 忘记密码

References

[1]

DonachineS T, AnsellG S. The effect of quench rate on the properties and morphology of ferrous martensite. Metall Trans, 1975, 6A: 1860-1860

[2]

TatehiraK, YodogawaM, SuzukiT. Martensitic transformation in Fe-Cr-C ternary alloys. Heat Treatment, 1984, 24: 79-79

[3]

MakiT, TsuzakiK, TamuraI. The Construction of lath martensite. Iron and Steel, 1979, 65: 515-515

[4]

MarderA R, KrussG. The morphology of martensite in iron-carbon alloys. ASM Transaction Quarterly, 1967, 60: 651-651

[5]

SpeichG R, LesiteW C. Temperating of steel. Metall Trans, 1974, 5A: 1663-1663

[6]

TanY H, ZhengD C, HeY H. New observation of martensite morphology and substructure using transmision election microcopy. Metall Trans, 1992, 23A: 1413-1413

AI Summary AI Mindmap
PDF

148

Accesses

0

Citation

Detail

Sections
Recommended

AI思维导图

/