Miniature optical fiber Fabry-Perot sensor based on PDMS end-cap structure

Abstract

This paper presents a method for fabricating a low-cost, highly reproducible miniature optical fiber Fabry-Perot (FP) sensor based on a polydimethylsiloxane (PDMS) end-cap structure. The FP cavity end-cap is formed by the optical fiber end-face and a PDMS droplet deposited onto it. The PDMS deposition is achieved by immersing the fiber end into pre-cured PDMS at a fixed speed, a process requiring careful control of PDMS viscosity and surface tension. By leveraging PDMS’s excellent thermal expansion coefficient, Poisson’s ratio, and other parameters, this method achieves high reproducibility via viscosity-optimized pre-curing, enhanced sensitivity for temperature measurements, and significant cost reduction versus commercial counterparts. Fiber FP sensors are increasingly widely used in biomedical and precision detection fields owing to their significant advantages, including small size, light weight, high sensitivity, and immunity to electromagnetic interference. In the fabrication of fiber FP sensors, using polymer materials is an effective technical approach. These polymers can be applied as coatings on the optical fiber end-face or as interlayer materials embedded between fibers to form the FP cavity structure, which not only significantly improves the overall sensor performance, but also enhances its sensitivity to changes in temperature, pressure, and refractive index. In the final part of this study, we successfully validated the exceptional performance of the PDMS end-cap based fiber FP sensor in detecting different temperatures conditions. Experimental results demonstrate a temperature sensitivity of 0.752 nm/℃ for sensors with a 60-μm PDMS end-cap, further confirming the sensor’s reliability and efficiency in practical applications.

Keywords

fiber Fabry-Perot (FP) sensor / polydimethylsiloxane (PDMS) / carbon nanopartides (CNPs)

References

[1] ZHAO Y, CHEN M Q, XIA F, et al. Small in-fiber FP low-frequency acoustic pressure sensor with PDMS diaphragm embedded in hollow-core fiber. Sensors and Actuators A: Physical, 2018, 270: 162-169.

[2] LIU T G, WANG S, JIANG J F, et al. Advances in optical fiber sensing technology for aviation and aerospace application. Chinese Journal of Scientific Instrument, 2014, 35(8): 1681-1692.

[3] CHEN X Z, TONG X L, ZHANG C, et al. High-precision optical fiber Fabry–Perot composite sensor for pressure and temperature. Optics Communications, 2022, 506: 127580.

[4] GAGNON Y J, ROTH C B. Local glass transition temperature Tg(z) within polystyrene is strongly impacted by the modulus of the neighboring PDMS domain. ACS Macro Letters, 2020, 9(11): 1625-1631.

[5] CHANG H L, XIE L, YANG X P, et al. Substrate configuration optimization of pvdf thin film sensor based on shock waves composite piezoelectric effect. Journal of North University of China(Natural Science Edition), 2025, 45(5): 557-564.

[6] ZHANG L, ZHANG X H, ZHAO Q. Flexible wearable sensor with porous pressure-sensitive structure based on MXene/RGO composites. Journal of Test and Measurement Technology, 2024, 38(5): 467-473.

[7] BAHRAMPOUR A R, TOFIGHI S, BATHAEE M, et al. Optical fiber interferometers and their applications. Interferometry-Research and Applications in Science and Technology, 2012, 1: 3-30.

[8] WU D K C, KUHLMEY B T, EGGLETON B J. Ultrasensitive photonic crystal fiber refractive index sensor. Optics Letters, 2009, 34(3): 322-324

[9] LI Y, DONG B, CHEN E Q, et al. Heart-rate monitoring with an ethyl alpha-cyanoacrylate based fiber Fabry-Perot sensor. IEEE Journal of Selected Topics in Quantum Electronics, 2021, 27(4): 5600206.

[10] WANG D, WU Y, SONG Y M, et al. High sensitivity fiber optic acceleration sensor based on Fabry-Perot interferometer. Optical Fiber Technology, 2022, 72: 102989.

[11] XU J C, PICKRELL G, WANG X W, et al. A novel temperature-insensitive optical fiber pressure sensor for harsh environments. IEEE Photonics Technology Letters, 2005, 17(4): 870-872.

[12] HU Y, WEI H M, MA Z W, et al. Microbubble-based optical fiber Fabry-Perot sensor for simultaneous high-pressure and high-temperature sensing. Optics Express, 2022, 30(19): 33639-33651.

[13] TSENG Y T, CHUANG Y J, WU Y C, et al. A gold-nanoparticle-enhanced immune sensor based on fiber optic interferometry. Nanotechnology, 2008, 19(34): 345501.

[14] HERNÁNDEZ-ROMANO I, CRUZ-GARCIA M A, MORENO-HERNÁNDEZ C, et al. Optical fiber temperature sensor based on a microcavity with polymer overlay. Optics Express, 2016, 24(5): 5654-5661.

[15] AREF S H, LATIFI H, ZIBAII M I, et al. Fiber optic Fabry-Perot pressure sensor with low sensitivity to temperature changes for downhole application. Optics Communications, 2007, 269(2): 322-330.

[16] RAO Y J, RAN Z L, GONG Y. Fiber-optic Fabry-Perot sensors: an introduction. Boca Raton: CRC Press, 2017.

[17] HE C J, HE Y L, YU C X, et al. Optical fiber shape sensing of flexible medical instruments with temperature compensation. Optical Fiber Technology, 2022, 74: 103123.

[18] MA C Q, PENG D H, BAI X Y, et al. A review of optical fiber sensing technology based on thin film and Fabry–Perot cavity. Coatings, 2023, 13(7): 1277.

[19] ZHU J J, ZHANG A P, XIA T H, et al. Fiber-optic high-temperature sensor based on thin-core fiber modal interferometer. IEEE Sensors Journal, 2010, 10(9): 1415-1418.

[20] GE M, LI Y, HAN Y H, et al. High-sensitivity double-parameter sensor based on the fibre-tip Fabry-Pérot interferometer. Journal of Modern Optics, 2017, 64(6): 596-600.

[21] ZHOU X, LI S G, LI X G, et al. High-sensitivity SPR temperature sensor based on hollow-core fiber. IEEE Transactions on Instrumentation and Measurement, 2020, 69(10): 8494-8499.