Variability in physical properties of plantation-grown progenies of Melia composita and determination of a kiln-drying schedule

Abstract

Plantation-grown progenies of Melia composita Willd. were studied for variability in several physical properties: density, radial and tangential shrinkage, longitudinal permeability of heartwood and sapwood. Furthermore, flat-sawn planks from each of the progeny were subjected to a quick-drying test for determination of kiln-drying schedule. The mean density of the species was 0.39 g cm⁻³ and the wood may be categorized as light wood. Mean radial shrinkage (%) for the species was 2.8% with progeny-wise variation in radial shrinkage from 1.56 to 4.11%. Mean tangential shrinkage (%) for the species was 5.54% with progeny-wise variation in tangential shrinkage from 3.69 to 7.71%. The resultant tangential-radial shrinkage ratio was 1.98 (less than two), which suggests that the wood is relatively stable with respect to drying behavior. Mean sapwood and heartwood longitudinal permeability of the species were 3.38 and 2.02 Darcy, respectively. Higher longitudinal permeability of sapwood and heartwood indicate better drying and preservative properties of the species. Terazawa quick-drying test method suggests that the species is less susceptible to drying defects. During the test, only moderate checks and cracks were observed. A tentative kiln-drying schedule was recommended based on these results.

Keywords

Melia composita Willd. / Density / Radial and tangential shrinkage / Longitudinal permeability / Quick-drying test / Kiln-drying schedule

References

[1] Anonymous (2016) Equilibrium relative humidity-saturated salt solutions. www.omega.com. Accessed on 30 Mar 2016

[2] Bahri S, Kumar S. Permeability studies on Eucalyptus hybrid. J Timber DevAssoc India, 1982, 28(3): 32-43.

[3] Basri E, Hadjib N, Saefudin. Basic properties in relation to drying properties of three wood species from Indonesia. J For Res, 2005, 2(1): 49-56.

[4] Brandao ATO. A screening to select kiln schedule. IPEF Int Piracicaba, 1992, 2: 20-24.

[5] Chowdhury KA, Ghosh SS. Indian woods their identification, properties and uses, 1958, Delhi: Manager Publications 304

[6] Effah B. The susceptibility of Cola nitida and Funtumia elastica to some drying defects. Int J Sci Technol, 2014, 4(2): 37-40.

[7] IS:1708. Methods of testing of small clear specimens of timber, 1986, New Delhi: Bureau of Indian standards, Indian Standards Institution, Manak Bhavan.

[8] Kumar S, Chaubey BB. Studies on permeability variation in tropical Indian hardwoods: effect of specific gravity and moisture content. J Timber Dev Assoc (India), 1987, 33(1): 35-49.

[9] Kumar A, Praveen Dobhal S, Sharma S, Ahmed N, Rawat US. Genetic screening and improvement of Melia composita Willd. Ann For, 2013, 21(2): 189-196.

[10] Ofori J, Brentuo B. Green moisture content, basic density, shrinkage and drying characteristics of the wood of Cedrelia odorata grown in Ghana. J Trop For Sci, 2005, 17(2): 211-223.

[11] Ofori J, Brentuo B. Drying charecterstics and development of kiln drying schedules for the wood of Alstonia boonei, Antrocaryon micraster, Bombax buonppozense, Dialium aubrevillei and Sterculia rhinoptala. Ghana J For, 2010, 26: 50-60.

[12] Sheikh AA, Kyoung CS. Observation of liquid permeability related to anatomical charecterstics in Samanea saman. Turk J Agric For, 2009, 33: 155-163.

[13] Simpson WT, Sagoe JA (1991) Relative drying times of 650 tropical woods-estimation by green moisture content, specific gravity and green weight density. United States Department of Agriculture and forest service, Forest products laboratory, General Technocal Report FPL-GTR-71

[14] Soe A, Win CN, Hlaing SS. Study on proposed kiln schedule of some commercial hardwood species from Tanintharyl region, 2013, Myanmar: Republic of the Union of Myanmar, Ministry of Environmental Conservation and Forestry, Forest Research Institute 22

[15] Sood D (2014) Wood and wood products in India 2014. Global Agriculture Information System, USDA Foreign Agriculture Service, GAIN report No.: IN4049

[16] Tan YE, Lim NPT, Gan KS, Wong TC, Lim SC and Thilagwathy M (2010) Testing methods for plantation grown tropical timbers. Report of ITTO project on improving utilizatio and value adding of plantation timbers from sustainable sources in Malaysiano. PD 306/04 (1), Forest research institute, Malaysia

[17] Terazawa S. Methods for easy determination of kiln drying schedule of wood. Jpn Wood Ind, 1965, 20(5): 216-226.

[18] Walker JCF. Primary wood processing: principles and practice, 2006 2 Dordrecht: Springer 596