Physical and mechanical properties of Klainedoxa gabonensis with engineering potential

Abstract

Adequate information is sparse for many tropical timbers on their engineering applications, which make their international promotion difficult. The physical and mechanical properties of Klainedoxa gabonensis Pierre ex Engl. (a lesser-utilized species) and Entandrophragma cylindricum were compared. K. gabonensis contained more moisture with greater density at 12 % moisture content than E. cylindricum and had a tangential–radial ratio for swelling and shrinkage of 1.31–1.38 and 1.58–1.63, respectively, within acceptable thresholds for engineering/structural timbers. For K. gabonensis, shear parallel to grain was 32.2 ± 0.4–33.5 ± 1 N mm⁻²; compressive parallel to grain, 80.7 ± 1.4–90.6 ± 1 N mm⁻²; modulus of rupture, 204 ± 4.0–214 ± 4.0 N mm⁻² and modulus of elasticity, 28,932 ± 664–29,493 ± 822 N mm⁻². These properties were superior to those of E. cylindricum [(15.5 ± 0.9)–(15.6 ± 0.6), (56.4 ± 4.5)–(63.6 ± 1.2), (99.4 ± 4.7)–(121.3 ± 10.6), and (9987.4 ± 207)–(10,051 ± 258) N mm⁻², respectively] and compared well with those of several traditional timbers for construction and furniture production. Its use would contribute to minimize pressure on the primary timbers in the forests and widen the raw material base for wooden products.

Keywords

Density / Dimensional stability / Timber engineering / Mechanical property / Tangential–radial ratio / Traditional timber

References

[1] Addae-Wireko L (2008) Mapping distribution of butterflies in Central Bobiri Forest and investigation of logging and stage of regeneration on butterfly species richness and diversity Reserve. Thesis (MSc). International Institute for Geo-information Science and Earth Observation (The Netherland) and Kwame Nkrumah University of Science and Technology (Ghana)

[2] Ali CA (2011) Physical-mechanical properties and natural durability of lesser used wood species from Mozambique. Thesis (PhD). Swedish University of Agricultural Sciences. 60 pp

[3] Anderson LO (2002) Wood-frame house construction. The Minerva Group Inc., New York, 236 pp

[4] Antwi-Boasiako C, Boadu KB. Swelling characteristics of conventional and organic preservative-treated porous tropical utility hardwood [Ceiba pentandra (l.) gaertn.]. Spec Topics Rev Porous Media, 2013, 4(2): 137-145.

[5] Asamoah A, Atta-Boateng A, Sarfowaa A (2012) Intsia bijuga (Colebr.). In: Lemmens RHMJ, Louppe D, Oteng-Amoako AA (eds) PROTA (Plant Resources of Tropical Africa/Ressources végétales de l’Afrique tropicale), Wageningen. http://www.prota4u.org/search.asp. Accessed 17 Feb 2015

[6] ASTM D 1037-06a (24) (2006) Test methods for evaluating properties of wood-base fiber and particle panel materials. Linear expansion with change in moisture content. American Standard for Testing Materials

[7] Bekhta P, Niemz P. Effect of relative humidity on some physical and mechanical properties of different types of fibreboard. Eur J Wood Prod, 2009, 67(3): 339-342.

[8] Boon-Kwee Ng, Thiruchelvam K. The dynamics of innovation in Malaysia’s wooden furniture industry: innovation actors and linkages. For Policy Econ, 2012, 14: 107-118.

[9] British Standard Institution, 1957. BS 373 (1957) Methods of testing small clear specimens of timber

[10] Cordero LDP, Kanninen M. Wood density and aboveground biomass of Bombacopsis quinata plantations in Costa Rica. For Ecol Manag, 2002, 165: 1-9.

[11] Davis EM (1962) Machining and related characteristics of United States Hardwoods. Technical Bulletin No. 1267

[12] Derome D, Griffa M, Koebel M, Carmeliet J. Hysteretic swelling of wood at cellular scale probed by phase-contrast X-ray tomography. J Struct Biol, 2011, 173: 180-190.

[13] Desch HE, Dinwoodie JM (1996) Timber: structure, properties, conversion, and use. 7th edn. Food Products Press, New York, 320 pp

[14] Dickison W (2000) Integrative plant anatomy. Academic Press, New York, 234 pp

[15] Dilik T, Dündar T, Kurtoğlu A, Hiziroglu S. Effect of adhesive types on some of the properties of laminated window profiles. J Mater Process Technol, 2007, 189(1–3): 320-324.

[16] Doumenge C, Séné VO (2012) Lophira alata Banks ex C.F.Gaertn. In: Lemmens RHMJ, Louppe D, Oteng-Amoako AA (eds) PROTA (Plant Resources of Tropical Africa/Ressources végétales de l’Afrique tropicale), Wageningen. http://www.prota4u.org/search.asp. Accessed 4 March 2015

[17] Eckelman CA (1998) The shrinking and swelling of wood and its effect on furniture. Purdue University Cooperative Extension Service, 26 pp

[18] Forest Products Development and Marketing Council of Guyana Inc. (2015) Limonaballi. http://www.fpdmcguy.org/SpeciesPages/speciespage.aspx?spid=Limonaballi. Accessed 17 Feb 2015

[19] Forest Products Laboratory (2010) Wood handbook—wood as an engineering material. Madison, Forest Products Society: General Technical Report FPL-GTR-190. 508 pp

[20] Forest Products Research and Development Institute (FPRDI) and International Tropical Timber Organization (ITTO) (1997) Manual on the properties and uses of lesser-used species of philippine timbers. FPRDI-ITTO Project PD 47/88 Rev. 3(1), 98 pp

[21] Ghana Forestry Commission (2012) Guidebook of some lesser used timbers of Ghana, 38 pp

[22] Gindl W, Teischinger A. Axial compression strength of Norway spruce related to structural variability and lignin content. Compos A, 2002, 33(12): 1623-1628.

[23] Green H (2007) Wood: craft, culture, history. Penguin, New York, 464 pp

[24] Gryc V, Horácek P. Variability in density of spruce (Picea abies[L.] Karst.) wood with the presence of reaction wood. J For Sci, 2007, 53(3): 129-137.

[25] Gunduz G, Korkut S, Aydemir D, Bekar I. The density, compression strength and surface hardness of heat treated hornbeam (Carpinus betulus L.) wood. Maderas. Ciencia y tecnología, 2009, 11(1): 61-70.

[26] Hagstrom C (2010) Understanding moisture content and wood movement. http://www.thisiscarpentry.com/2010/09/03/moisture-content-wood-movement/. Accessed 9 Sept 2014

[27] Harris T, Pond B (2012) The importance of shear testing in process design, quality control. http://www.qualitymag.com/articles/90413-the-importance-of-shear-testing-in-process-design–quality-control. Accessed 9 Sept 2014

[28] Haviarova E, Eckelman C, Erdil Y. Design and testing of environmentally friendly wood school chairs for developing countries. For Prod J, 2001, 51(3): 58-64.

[29] Haygreen JG, Bowyer JL (1996) Forest products and wood science, 3rd edn. Iowa State University Press, Ames, 484 pp

[30] Hernandez ER. Influence of accessory substances, wood density and interlocked grain on the compressive properties of hardwoods. Wood Sci Technol, 2007, 41: 249-265.

[31] Izekor DN, Fuwape JA, Oluyege AO. Effects of density on variations in the mechanical properties of plantation grown Tectona grandis wood. Arch Appl Sci Res, 2010, 2(6): 113-120.

[32] Johnson GC, Tornton JD, Trajstman AC, Cookson LJ. Comparative in -ground natural durability of white and black cypress pines (Callitris glaucophylla and C. endlicheri). Aust For, 2006, 69(4): 243-247.

[33] Kémeuzé VA (2008) Entandrophragma cylindricum (Sprague). In: Louppe D, Oteng-Amoako AA, Brink M (eds) PROTA (Plant Resources of Tropical Africa/Ressources végétales de l’Afrique tropicale). Wageningen. www.prota4u.org/search.asp. Accessed 16 April 2013

[34] Kumaran MK. Moisture diffusivity of building materials from water absorption measurements. J Therm Envel Build Sci, 1999, 22: 349-355.

[35] Lima IL, Longui EL, Freitas MLM, Zanatto ACS, Zanata M. Physical-mechanical and anatomical characterization in 26-year-old Eucalyptus resinifera wood. Floresta e Ambiente, 2014, 21(1): 91-98.

[36] Mantanis GI, Young RA, Rowell RM. Swelling of wood Part 1. Swelling in water. Wood Sci Technol, 1994, 28: 119-134.

[37] Massayuki M, Matoski A, Magajewski C, Machado J. Shear strength parallel of the wood fiber stress by punching: proposed test. Revista Ing Constr, 2014, 29(1): 46-60.

[38] Mecklenburg MF (2007) Determining the acceptable ranges of relative humidity and temperature in museums and galleries, part 1, structural response to relative humidity, pp. 1–57. http://si-pddr.si.edu/dspace/handle/100887055. Accessed 5 Nov 2014

[39] Meier E (2014) The wood database. http://www.wood-database.com/wood-articles/crushing-strength/. Accessed 7 Oct 2014

[40] Minford JD (1991) Treatise on adhesion and adhesives, vol 7. CRC Press, Florida, 528 pp

[41] Murata K, Masuda M. Microscopic observation of transverse swelling of latewood tracheid: effect of macroscopic/mesoscopic structure. J Wood Sci Technol, 2006, 52: 283-289.

[42] Niklas JK. Mechanical properties of black locust (Robinia pseudoacacia) wood: correlations among elastic and rupture moduli, proportional limit, and tissue density and specific gravity. Ann Bot, 1997, 79: 479-485.

[43] Ocloo JK, Laing E. Correlation of relative density and strength properties with anatomical properties of the wood of Ghana Celtis species. Discov Innov, 2003, 15(3/4): 186-197.

[44] Ofori DA (2007) Milicia excelsa (Welw.) C.C.Berg. In: Louppe D, Oteng-Amoako AA, Brink M (eds) PROTA (Plant Resources of Tropical Africa/Ressources végétales de l’Afrique tropicale), Wageningen. http://www.prota4u.org/search.asp. Accessed 4 March 2015

[45] Oteng-Amoako AA, Obeng EA (2012) Klainedoxa gabonensis (Pierre). In: Lemmens RHMJ, Louppe D, Oteng-Amoako AA (eds) PROTA (Plant Resources of Tropical Africa/Ressources végétales de l’Afrique tropicale). Wageningen. www.prota4u.org/search.asp. Accessed 16 April 2013

[46] Ozcifci A, Ayar S, Baysal E, Toker H. The effects of some impregnation parameters on modulus of rupture and modulus of elasticity of wood. Wood Res, 2011, 56(2): 277-284.

[47] Pakarinen T. Success factors of wood as a furniture material. For Prod J, 1999, 49(9): 79-85.

[48] Persson K (1997) Modelling of wood mechanical properties by a micromechanical approach. Thesis (PhD), University of Lund

[49] Pinto I, Pereira H, Usenius A. Heartwood and sapwood development within maritime pine (Pinus pinaster Ait) stems. Trees, 2004, 18(3): 284-294.

[50] Postell J (2012) Furniture Design. Wiley, New York, 416 pp

[51] Rijsdijk JF, Laming PB (2010) Physical and related properties of 145 timbers: information for practice. Springer, Dorfrecht, 380 pp

[52] Rivers S, Umney N (2007) Conservation of furniture. Routledge, New York, 840 pp

[53] Rowell RM (2005) Handbook of wood chemistry and wood composites. CRC Press, Florida, 487 pp

[54] Rowell MR, Ibach ER, McSweeny J, Nilsson T. Understanding decay resistance, dimensional stability and strength changes in heat-treated and acetylated wood. Wood Mater Sci Eng, 2009, 4(1–2): 14-22.

[55] Shelly JR. Wood: materials for furniture. Encyclopedia of materials: science and technology, 2001, Michigan: Elsevier 9658 9663

[56] Sherwood GE (1994) Moisture-related properties and the effect of moisture on wood and wood products. In Treschsel RH (ed) Moisture control in buildings. ASTM International, pp. 72–83

[57] Shmulsky R, Jones DP (2011) Forest products and wood science. 6th edn. Wiley, New York, 496 pp

[58] Simeone R (2011) Tropical treasury: lesser known species. www.nepcon.pl/newsroom/tropical-treasury-known-species. Accessed 20 Oct 2014

[59] Smith PM (2000) Utilization of lesser-used species as alternative raw materials for forest-based industries. International Tropical Timber Organization, 95 pp

[60] Strong J (2013) Types of wood for woodworking. http://www.dummies.com/how-to/content/types-of-wood-for-woodworking.html. Accessed 15 Sept 2014

[61] Tankut N. The effect of adhesive type and bond line thickness on the strength of mortise and tenon joints. Int J Adhes Adhes, 2007, 27: 493-498.

[62] Unger A, Schniewind A, Unger W (2001) Conservation of wood artifacts: a handbook. Springer, Berlin, 578 pp

[63] Unsal O, Ayrilmis N. Variations in compression strength and surface roughness of heat-treated Turkish river red gum (Eucalyptus camaldulensis) wood. J Wood Sci, 2005, 51: 405-409.

[64] Upton DAJ, Attah A (2003) Commercial timbers of Ghana—the potential for lesser used species. Forestry Commission of Ghana, 58 pp

[65] Vick CB. Adhesive bonding of wood materials. Wood handbook wood as an engineering material, 1999, Madison: Forest Products Society 23 76

[66] Wahab R, Mustafa TM, Shafiqur R, Mohammed SA, Othman S, Mahmud S, Mat RMS. Relationship between physical, anatomical and strength properties of 3-year-old cultivated tropical bamboo Gigantochloa scortechinii. ARPN J Agric Biol Sci, 2012, 7(10): 782-791.

[67] Winandy JE. Arntzen CJ. Wood properties. Encyclopedia of agricultural science, 1994, San Diego: Academic Press 549 561

[68] Zhang SY. Wood specific gravity mechanical property relationship at species level. Wood Sci Technol, 1997, 31: 181-191.

[69] Zhu Y, Wang W, Cao J. Improvement of hydrophobicity and dimensional stability of thermally modified southern pine wood pretreated with oleic acid. BioResources, 2014, 9(2): 2431-2445.

[70] Zobel BJ, Jett JB (1995) Genetics of wood production. Springer, New York, 337 pp

[71] Zwerger K (2012) Wood and wood joints: building traditions of Europe, Japan and China. Walter de Gruyter, Berlin, 304 pp