Modeling of the height–diameter relationship using an allometric equation model: a case study of stands of Phyllostachys edulis

Xuan Gao , Zhandong Li , Hongmei Yu , Zehui Jiang , Chen Wang , Yu Zhang , Lianghua Qi , Lei Shi

Journal of Forestry Research ›› 2015, Vol. 27 ›› Issue (2) : 339 -347.

PDF
Journal of Forestry Research ›› 2015, Vol. 27 ›› Issue (2) : 339 -347. DOI: 10.1007/s11676-015-0145-6
Original Paper

Modeling of the height–diameter relationship using an allometric equation model: a case study of stands of Phyllostachys edulis

Author information +
History +
PDF

Abstract

Understanding the relationship between tree height (H) and diameter at breast height (D) is vital to forest design, monitoring and biomass estimation. We developed an allometric equation model and tested its applicability for unevenly aged stands of moso bamboo forest at a regional scale. Field data were collected for 21 plots. Based on these data, we identified two strong power relationships: a correlation between the mean bamboo height (H m) and the upper mean H (H u), and a correlation between the mean D (D m) and the upper mean D (D u). Simulation results derived from the allometric equation model were in good agreement with observed culms derived from the field data for the 21 stands, with a root-mean-square error and relative root-mean-square error of 1.40 m and 13.41 %, respectively. These results demonstrate that the allometric equation model had a strong predictive power in the unevenly aged stands at a regional scale. In addition, the estimated average height–diameter (HD) model for South Anhui Province was used to predict H for the same type of bamboo in Hunan Province based on the measured D, and the results were highly similar. The allometric equation model has multiple uses at the regional scale, including the evaluation of the variation in the HD relationship among regions. The model describes the average HD relationship without considering the effects caused by variation in site conditions, tree density and other factors.

Keywords

Allometric equation / Bamboo / Height–diameter relationship / Model / Phyllostachys edulis / Poaceae / Stratification

Cite this article

Download citation ▾
Xuan Gao, Zhandong Li, Hongmei Yu, Zehui Jiang, Chen Wang, Yu Zhang, Lianghua Qi, Lei Shi. Modeling of the height–diameter relationship using an allometric equation model: a case study of stands of Phyllostachys edulis. Journal of Forestry Research, 2015, 27(2): 339-347 DOI:10.1007/s11676-015-0145-6

登录浏览全文

4963

注册一个新账户 忘记密码

References

[1]

Cortini F, Filipescu CN, Groot A, MacIsaac DA, Nunifu T. Regional models of diameter as a function of individual tree attributes, climate and site characteristics for six major tree species in Alberta, Canada. Forests, 2011, 2: 814-831.

[2]

Fang ZX, Bailey RL. Height-diameter models for tropical forests on Hainan Island in southern China. For Ecol Manag, 1998, 110: 315-327.

[3]

Feldpausch TR, Banin L, Phillips OL, Baker TR, Lewis SL, Quesada CA, Affum-Baffoe K, Arets E, Berry NJ, Bird M, Brondizio ES, de Camargo P, Chave J, Djagbletey G, Domingues TF, Drescher M, Fearnside PM, Franca MB, Fyllas NM, Lopez-Gonzalez G, Hladik A, Higuchi N, Hunter MO, Iida Y, Salim KA, Kassim AR, Keller M, Kemp J, King DA, Lovett JC, Marimon BS, Marimon BH, Lenza E, Marshall AR, Metcalfe DJ, Mitchard ETA, Moran EF, Nelson BW, Nilus R, Nogueira EM, Palace M, Patino S, Peh KSH, Raventos MT, Reitsma JM, Saiz G, Schrodt F, Sonke B, Taedoumg HE, Tan S, White L, Woll H, Lloyd J. Height-diameter allometry of tropical forest trees. Biogeosciences, 2011, 8: 1081-1106.

[4]

Inoue A. Culm form analysis for bamboo, Phyllostachys pubescens. J For Res, 2013, 24: 525-530.

[5]

Inoue A, Yoshida S. Allometric model of the height-diameter curve for even-aged pure stands of Japanese cedar (Cryptomeria japonica). J For Res, 2004, 9: 325-331.

[6]

Inoue A, Sakamoto S, Suga H, Kitahara F. Estimation of culm volume for bamboo, Phyllostachys bambusoides, by two-way volume equation. Biomass Bioenerg, 2011, 35: 2666-2673.

[7]

Johansson T. Site index curves for young hybrid larch growing on former farmland in Sweden. Forests, 2012, 3: 723-735.

[8]

Kaufman L, Rousseeuw PJ. Finding groups in data: an introduction to cluster analysis. 2005, Hoboken: Wiley

[9]

Ketterings QM, Coe R, van Noordwijk M, Ambagau Y, Palm CA. Reducing uncertainty in the use of allometric biomass equations for predicting above-ground tree biomass in mixed secondary forests. For Ecol Manag, 2001, 146: 199-209.

[10]

Lopez-Serrano FR, Garcia-Morote A, Andres-Abellan M, Tendero A, del Cerro A. Site and weather effects in allometries: a simple approach to climate change effect on pines. For Ecol Manag, 2005, 215: 251-270.

[11]

McClure FA. The bamboos: A fresh perspective. 1966, Cambridge: Harvard University Press

[12]

McMahon T. Size and shape in biology. Science, 1973, 179: 1201-1204.

[13]

McMahon TA, Kronauer RE. Tree structures: deducing the principle of mechanical design. J Theor Biol, 1976, 59: 443-466.

[14]

Murtagh F. Multidimensional clustering algorithms. 1985, Vienna: Physika Verlag

[15]

Newaz MS, Millat-E-Mustafa M. Growth and yield prediction models for Acacia mangium grown in the plantations of the central region of Bangladesh. New For, 2004, 27: 81-88.

[16]

Niklas KJ. The scaling of plant height: a comparison among major plant clades and anatomical grades. Ann Bot, 1993, 72: 165-172.

[17]

Osumi S, Kajihara M, Ouchi Y, Imanaga M, Sugawara S, Kitamura M, Shibata N, Ishikawa Y. Forest mensuration. 1987, Tokyo: Yokendo Press

[18]

Paulo JA, Tome J, Tome M. Nonlinear fixed and random generalized height-diameter models for Portuguese cork oak stands. Ann For Sci, 2011, 68: 295-309.

[19]

Peng C, Zhang L, Liu J. Developing and validating nonlinear height-diameter models for major tree species of Ontario’s boreal forests. North J Appl For, 2001, 18: 87-94.

[20]

R Core Team R: a language and environment for statistical computing. 2013, Vienna: R Foundation for Statistical Computing

[21]

Saunders MR, Wagner RG. Height-diameter models with random coefficients and site variables for tree species of Central Maine. Ann For Sci, 2008, 65: 1-10.

[22]

Song X, Zhou G, Jiang H, Yu S, Fu J, Li W, Wang W, Ma Z, Peng C. Carbon sequestration by Chinese bamboo forests and their ecological benefits: assessment of potential, problems, and future challenges. Environ Rev, 2011, 19: 418-428.

[23]

SPSS (2004) SPSS 13.0 for the Windows. SPSS Inc., Chicago, IL

[24]

Stark H, Nothdurft A, Bauhus J. Allometries for widely spaced Populus ssp. and Betula ssp. in nurse crop systems. Forests, 2013, 4: 1003-1031.

[25]

Takashima A, Kume A, Yoshida S, Murakami T, Kajisa T, Mizoue N. Discontinuous DBH-height relationship of Cryptomeria japonica on Yakushima Island: effect of frequent typhoons on the maximum height. Ecol Res, 2009, 24: 1003-1011.

[26]

Wang XP, Fang JY, Tang ZY, Zhu B. Climatic control of primary forest structure and DBH-height allometry in Northeast China. For Ecol Manage, 2006, 234: 264-274.

[27]

Ward JJH. Hierarchical grouping to optimize an objective function. J Am Stat Assoc, 1963, 58: 236-244.

[28]

Watanabe M, Oohata S. Studies on bamboo culm form (I) On Phyllostachys bambusoides Sieb. et Zucc. J Jap For Soc, 1980, 62: 9-16.

[29]

Watanabe M, Inoue M, Takano T. Discussion on the prediction of culm height in Phyllostachys bambusoides bamboos. Bamboo J, 1989, 7: 27-38.

[30]

West GB, Brown JH, Enquist BJ. A general model for the origin of allometric scaling laws in biology. Science, 1997, 276: 122-126.

[31]

West GB, Brown JH, Enquist BJ. A general model for the structure and allometry of plant vascular systems. Nature, 1999, 400: 664-667.

[32]

Zhang LJ. Cross-validation of non-linear growth functions for modelling tree height-diameter relationships. Ann Bot, 1997, 79: 251-257.

[33]

Zhou FC. Bamboo forest silviculture. 1998, Beijing: China Forestry Publishing House

AI Summary AI Mindmap
PDF

266

Accesses

0

Citation

Detail

Sections
Recommended

AI思维导图

/