Effect of moisture content on the ultrasonic acoustic properties of wood

Abstract

We determined the ultrasonic velocity and energy attenuation value of three tree species (basswood, elm, and fir) 1 per tree in different moisture content levels, using RSM-SY5 ultrasonic testing instrument, and analyzed the regularity of ultrasonic velocity and energy attenuation values with moisture content, respectively. The ultrasonic velocity of the three species decreased as moisture content increased, with the turning point at 32 % of moisture content. When the moisture content was more than 32 %, the growth curve of ultrasonic wave velocity was flattened. The moisture contents of all three species increased under the any point moisture content of 1–60 %. The differentiation degrees of energy attenuation value of three species were higher than the corresponding ultrasonic wave velocity, when the moisture content was less than 15 %. The differentiation degrees of the energy attenuation value of three species was higher than the corresponding ultrasonic velocity, when the moisture content was more than 15 %.

Keywords

Ultrasonic / Moisture content / Velocity / Energy attenuation / Wood

References

[1] Beall FC, Biernacki JM, Lemaster RL. The use of acousto-ultrasonics to detect bio deterioration in utility poles. Journal of Acoustic Emission, 1994, 12(1/2): 55-64.

[2] Brashaw BK, Wang XP, Ross RJ, Pellerin RF. Relationship between stress wave velocities of green and dry veneer. Forest Products Journal., 2004, 55(6): 85-89.

[3] Bucur V, Feeney F. Attenuation of ultrasound in solid wood. Ultrasonics, 1992, 30(2): 76-81.

[4] Chan JM, Walker JC, Raymond CA. Effects of moisture content and temperature on acoustic velocity and dynamic MOE of radiate pine sapwood boards. Wood Sci Technol, 2011, 45(4): 609-626.

[5] Chen YP, Li H, Li DQ, Zhang T. Effects on stress wave speed inside wood members in historical buildings. China Wood Indus, 2012, 26(2): 37-40.

[6] Halabe UB, Bidigalu GM, GangaRao HVS, Rose RJ. Nondestructive evaluation of green wood using stress wave and transverse vibration techniques. Mater Eval, 1997, 55(9): 1013-1018.

[7] Ilic J. Variation of the dynamic elastic modulus and wave velocity in the fiber direction with other properties during the drying of Eucalyptus Regnans F. Muell. Wood Sci Technol, 2001, 35(1): 157-166.

[8] Kawamoto S. Attenuation of ultrasonic waves in wood. Mokuzai Gakkaishi, 1994, 40(7): 772-776.

[9] Liao CH, Zhang HJ, Li DQ. Effect of water content on rapid detection index properties of wood. Jiangsu Agric Sci, 2012, 40(6): 280-282. (in Chinese)

[10] Quarles SL. The effect of moisture content and ring angle on the propagation of acoustic signals in wood. J Acoust Emiss, 1990, 9(3): 189-195.

[11] Rl Lemaster, Sl Quarles. The effect of same-side and through-thickness transmission modern signal propagation in wood. J Acoust Emiss, 1990, 9(1): 17-24.

[12] Sandoz J. Moisture content and temperature effect on ultrasound timber grading. Wood Sci Technol, 1993, 27(5): 373-380.

[13] Si H, Lu ZY, Wang LC. Influence of moisture content on the dynamic MOE of Larchwood. Wood Proces Mach, 2007, 1: 16-19. (in Chinese)

[14] Wang SY, Chuang ST. Experimental data correction of the dynamic elastic module velocity and density of solid wood as a function of MC above the fiber saturation point. Holzforschung, 2000, 54(3): 309-314.