Dynamic-mechanical analysis and SEM morphology of wood flour/polypropylene composites

Abstract

A study was conducted to investigate the effects of compatibilizers, including Maleic anhydride grafted polypropylene (MA-PP) and maleic anhydride grafted ethylene-propylene-diene copolymer (MA-EPDM), on wood-flour/polypropylene (WF/PP) composites. WF/PP composites were prepared by direct extrusion profiles using a twin-screw/single-screw extruder system. DMA analysis showed that the loss factor of composites decreased and the storage modulus improved in the presence of MA-PP, which indicated much better interfacial adhesion between the PP matrix and wood flour filler than in the absence of compatibilizer. Morphological feature based on SEM observation showed that MA-PP and MA-EPDM improved the dispersion of the wood particles in the plastic matrix. MA-EPDM is a soft segment, although it improved the interfacial adhesion, storage modulus decreases with adding of MA-EPDM. As compatibilizer of wood-flour/polypropylene composites, both DMA analysis and SEM feature proved that MA-PP was superior to MA-EPDM.

Keywords

Wood flour / Polypropylene / Composites / Dynamic-mechanical analysis

References

[1] Adrian J., Nunez, Pablo C., Sturm, Jose M., Kenny et al. Mechanical characterization of polypropylene-wood flour composites [J]. J. Apply Polymer Science, 2003, 88: 1420-1828.

[2] Ashida M., Noguchi T. Effect of matrix’s type on the dynamic properties for short fiber-elastomer composite [J]. J. Apply Polymer Science, 1985, 30: 1011-1021.

[3] Harper D., Wolcott M. Interaction between coupling agent and lubricants in wood-polypropylene composites [J]. Composites, 2004, 35: 385-394.

[4] Fernanda M.B., Coutinha, Thais H.S., Costa, Joao Carlos M., Suarez, Daniele P., Melo Sawdust reinforced polypropylene composites: a study of fracture behavior [J]. Polymer Testing, 2000, 19: 625-633.

[5] Georgopoulos S.Th., Tarantili P.A. et al. Thermoplastic polymers reinforced with fibrous agricultural residues [J]. Polymer Degradation Stability, 2005, 90: 303-312.

[6] Hristov V.N., Lach R., Grellmann W. Impact fracture behavior of modified polypropylene/ wood fiber composites [J]. Polymer Testing, 2004, 23: 581-589.

[7] Hristov V.N., Vasileva S.T. Deformation mechanisms and mechanical properties of modified polypropylene/wood fiber composites [J]. Polymer Composite, 2004, 25: 521-526.

[8] Hristov V.N., Vasileva S.T. Modified polypropylene/wood fiber composites: II fracture, deformation and mechanical properties [J]. J. Apply Polymer Science, 2004, 97: 1286-1292.

[9] Ismail H., Nizam J.M., Abdul khalil H.P.S. The effect of a compatibilizer on mechanical properties and mass swell of white rice husk ash filled natural rubber/linear low density polyethylene blends [J]. Polymer testing, 2001, 20(2): 125-123.

[10] Joao C., Miguez S., Fernanda M.B., Coutinha, Thais H., Sydenstricker SEM Studies of tensile fracture surfaces of polypropylene-sawdust composites [J]. Polymer Testing, 2003, 22: 819-824.

[11] Oksman K., Clemons C. Mechanical properties and morphology of impact modified polypropylene-wood flour composites [J]. J. Apply Polymer Science, 2003, 67: 1503-1513.

[12] Krzysik, A.M., Youngqnist, J.A., Myers, G.E, Chahyadi, I.S. 1990. Wood-polymer bonding in extruded and nonwoven web composites panels [J]. Wood Adhesives, Symposium of USDA Forestservice, Madison, WI, 183–189.

[13] Lu J.Z., Wu Q., McNabb H.S. Chemical coupling in wood fiber and polymer composites: a review of coupling agents and treatments [J]. Wood Fiber Science, 2000, 32: 88-104.

[14] Avella M., Casale L. et al. Broom fibers as reinforcing materials for polypropylene-based composites [J]. J. Apply Polymer Science, 1998, 68: 1077-1089.

[15] McGrum N.G., Read B.E., Williams G. An elastic and dielectric effects in polymeric solids [M], 1967 London: wiley

[16] Qiu W. Effect of maleated polypropylene on the performance of polypropylene/cellulose composite [J]. Polymer Composite, 2005, 52: 448-453.

[17] Karnani R., Krishnan M., Narayan R. Biofiber-reinforced polypropylene composites [J]. Polymer Engineer Science, 1997, 37: 476-483.

[18] Torres F.G., Cubillas M.L. Study of the interfacial properties of natural fiber reinforced polyethylene [J]. Polymer Testing, 2005, 24: 694-698.

[19] Hritov V., Vasileva S. Dynamic mechanical and thermal properties of modified poly (propylene) wood fiber composites [J]. Madromol. Mater. Eng., 2003, 288: 798-806.

[20] Wang Y., Zhang Q., Na B. et al. Dependence of impact strength on the fracture propagation direction in dynamic packing injection molded PP/EPDM blends [J]. Polymer, 2003, 44: 4261-4271.

[21] Wielage B., Lampke Th. Processing of natural-fiber reinforced polymers and the resulting dynamic-mechanical properties [J]. Materials processing technology, 2003, 139: 140-146.