Study on noise of precision panel saw

Abstract

According to ZBJ65015-89 standard about noise level testing method of woodworking tool, the noise testing for MJ90# and MJC1125 precision panel saws was conducted by using model ND2 precision sound-level apparatus and double frequency wave filter. The testing results showed that the unloaded running noise source of precision panel saw was mainly from main saw blade and its aeromechanic noise was the largest. The rotating speed was determined as an important factor to impact dynamic characters of precision panel saw as the unloaded running noise increased along with speed increasing. For reducing noise of precision panel saw, the first important way is to reduce the aeromechanic noise produced by main saw blade rotating at high speed; based on assuring the processing precision, choosing low speed is a better way to drop dawn noise; from the view of design, the diameter of clamping lid is better of half of outer diameter of main saw blade.

Keywords

Noise testing / Precision panel saw / Comparative analysis / TS643 / B

References

[1] Yumei Gao Control of noise and vibration, 1995 Beijing: China Railway Press

[2] Wei Hou Measurement and analysis of woodworking machines [J]. Forestry Machinery and Woodworking Equipment, 1993, 15: 17-21.

[3] Leung B.H. Study of high-frequency excess noise in woodworking machines [J]. Journal of Applied Physics, 2003, 23(1–2): 203-206.

[4] Chuanxin Li Study on solid alloy of little stitch and low noise (III)[J] Journal of Jilin Forestry College, 1997, 29: 23-25.

[5] Meijing Lu Study and analysis of noise test technology [J]. Woodworking Machine, 1992, 7: 22-25.

[6] Jian Sun Noise has become the important harmful factors of impacting workers health [J]. Safety, Heath and Environment, 2003, 29: 35-39.

[7] houli Wang Discussion on vibration of circular saw, noise and way of reducing noise [J]. Journal of Nanjing Forestry Industry, 1983, 7: 15-17.

[8] Shuangquan Zeng Control and study of noise of circular saw [J]. Woodworking Machine, 1995, 21: 28-31.