Comparison and analysis of the main technological factors of influencing mechanical properties of scrimber and PSL

Abstract

The main mechanical properties of scrimber and Parallel Strand Lumber (PSL), were researched through technological test. Experimental materials of scrimber are small log of Aspen, Dahurian larch and Birch. Experimental materials of PSL come from fishtail veneer strips at plywood plant of Aspen and Birch. In the laboratory conditions low quality small log and wood residues can yield scrimber and PSL with high strength. After the technological conditions of scrimber were compared with that of PSL, the main factors of influencing their properties were separately pointed out and the reasons influencing properties have been analyzed in this paper. The results showed that the hot-pressing pressure is an important technological factor for scrimber. The ratio of veneer-strand length to thickness is a key technological factor for PSL.

Keywords

Scrimber / Technological factors / Mechanical properties / S781.21 / A

References

[1] Weizhu Jin, Yan Ma, Wei Liu et al. Experimental research and analysis of mechanical properties of scrimber made from different wood species [J]. Journal of China Forest Products, 1998, 25(1): 25-26.

[2] Weizhu Jin, Yan Ma, Lixin Cai et al. Experiment and study on manufacture technology of Scrimber [J]. Journal of China Forest Product, 1997, 24(2): 16-17.

[3] Weizhu Jin, Jiawu Yang, Xiaoping Guan et al. Experimental research on principal physical and mechanical properties of composite veneer-strsnd board [J]. Journal of China Forest Product, 1999, 26(6): 3-4.

[4] Weizhu Jin, Yan Ma Scrimber technology [M], 1998 Harbin: Northeast Forestry University Published House 207-221.

[5] Ransom Kelly Low-quality timber can yield high-quality substitutes [J]. Forest Industries, 1990, 11(9): 20-21.

[6] William A. Scholes Scrimber: another way to stretch timber supply [J]. Word Wood, 1990, 31(10): 26-27.