High Temperature-Impact Composite Environmental Test on Radioisotope Heat Source

Abstract

To study the reliability of radioisotope heat source in the high temperature-impact composite environment, a high temperature-impact composite environment test system is developed. The main parts of this design are temperature loading system, impact test system, thermal shield system and computer information collection system. The proposed system can provide heating temperature of 500 ℃. The simulated samples of the isotope heat source were tested at 500 ℃ andhigh temperature-impact composite environmental tests are performed for 5000 times. The response temperature rise response curve and impact waveforms are obtained. The results show that this system can accomplish high temperature-impact composite environment test successfully.

Keywords

environmental test / High Temperature-Impact Compound Environment / optimization design / test method

References

[1] 秦洁,高翔,裴生科,等. 航空发动机声衬结构低温结冰与振动噪声综合环境试验研究[J]. 科学技术与工程,2016,16(2):249-253
Qin J,Gao X,Pei S K,et al. Experimental investigation on the dynamic characteristic of urbofan acoustic liner under vibro-acoustic excitation and periodic icing condition[J]. Science Technology and Engineering,2016,16(2):249-253
[2] Zhe W,Chun M Y,Qian J L,et al. Damage behavior of tungsten fiber-reinforced copper matrix composite after high-speed impact[J]. Rare Met,2014,33(3):330-336
[3] 丁继锋,赵欣,韩增尧,等. 航天器火工冲击技术研究进展[J]. 宇航学报,2014,35(12):1339-1349
Ding J F,Zhao X,Han Z Y,et al. Research development of spacecraft oyroshock technique[J]. Journal of Astronautics,2014,35(12):1339-1349
[4] 高禹,王绍权,董尚利,等. 复合材料低速冲击测试与分析方法的研究进展[J]. 高分子材料科学与工程,2015,31(7):184-189
Gao Y,Wang S Q,Dong S L,et al. Recent developments in low-velocity impact test and analysis for composite plates[J]. Polymer Materials Science & Engineering,2015,31(7):184-189
[5] 柳征勇,郑伟. 碰撞引起的宇航设备冲击响应仿真分析[J]. 振动与冲击,2005,24(5):123-126
Liu Z Y,Zheng W. Shock response emulation analysis of aerospace equipment[J]. Journal of Vibration and Shock,2016,35(1):63-66
[6] 郭渊,关志东,刘德博,等. 复合材料静压痕与落锤冲击初始损伤对比试验[J]. 北京航空航天大学学报,2009,35(8):1019-1021
Guo Y,Guan Z D,Liu D B,et al. Comparison between quasistatic indentation testing and drop weight impact testing on delamination onset damage[J]. Journal of Beijing University of Aeronautics and Astronautics, 2009,35(8):1019-1021