A feasibility study on the deposition and in-situ modification of soda lignin by suspension plasma spraying

Abstract

In this study, low-energy suspension plasma spraying (LE-SPS) was introduced as a novel approach for the deposition and simultaneous plasma-induced chemical modification of soda lignin. A colloidal lignin particle suspension was deposited onto glass substrates using a modified plasma spraying system with radial suspension injection. Scanning electron microscopy revealed continuous and dense coatings with an average thickness of approximately 4 μm. X-ray photoelectron spectroscopy (XPS), Fourier transform infrared (FT-IR) spectroscopy, and¹H/¹³C nuclear magnetic resonance (NMR) spectroscopy analyses indicated substantial plasma-induced chemical restructuring. The coatings exhibited increased oxygen-containing functionalities, including carbonyl and carboxyl/ester-type contributions, together with changes in aromatic signals. These spectroscopic changes are consistent with oxidative modification of lignin and increased contributions from ether-and ester-like environments. Overall, the results demonstrated that LE-SPS enabled lignin deposition accompanied by chemical transformation into a chemically reorganized lignin-based coating without additional crosslinkers, catalysts, or organic solvents.

Keywords

Lignin / Fourier transform infrared / X-ray photoelectron / Nuclear magnetic resonance / Suspension plasma spraying / Biopolymer

References

[1] Abolore, R.S., Jaiswal, S., Jaiswal, A.K., 2025. A comprehensive review of the application of cold plasma technology in lignocellulosic biomass pretreatment. Biofuels Bioprod. Biorefin. 19, 453-468.

[2] Balakshin, M.Y., Capanema, E.A., 2015. Comprehensive structural analysis of biorefinery lignins with a quantitative 13 NMR approach. RSC Adv. 5, 87187-87199.

[3] Borrega, M., Päärnilä, S., Greca, L.G., Jääskeläinen, A.S., Ohra-aho, T., Rojas, O.J., Tamminen, T., 2020. Morphological and wettability properties of thin coating films produced from technical lignins. Langmuir 36, 9675-9684.

[4] Carton, O., Ben Salem, D., Bhatt, S., Pulpytel, J., Arefi-Khonsari, F., 2012. Plasma polymerization of acrylic acid by atmospheric pressure nitrogen plasma jet for biomedical applications. Plasma Process. Polym. 9, 984-993.

[5] Cheng, Y., Zhao, P.X., Alma, M.H., Sun, D.F., Li, R., Jiang, J.X., 2016. Improvement of direct liquefaction of technical alkaline lignin pretreated by alkaline hydrogen peroxide. J. Anal. Appl. Pyrolysis 122, 277-281.

[6] Dastpak, A., Yliniemi, K., De Oliveira Monteiro, M.C., Höhn, S., Virtanen, S., Lundström, M., Wilson, B.P., 2018. From waste to valuable resource: lignin as a sustainable anti-corrosion coating. Coatings 8, 454.

[7] Diop, A., Jradi, K., Daneault, C., Montplaisir, D., 2015. Kraft lignin depolymerization in an ionic liquid without a catalyst. BioResources 10, 4933-4946.

[8] Dowling, D.P., O’Neill, F.T., Langlais, S.J., Law, V.J., 2011. Influence of DC pulsed atmospheric pressure plasma jet processing conditions on polymer activation. Plasma Process. Polym. 8, 718-727.

[9] Faix, O., 1991. Classification of lignins from different botanical origins by FT-IR spectroscopy. Holzforschung 45, 21-28.

[10] Ferreira, S., Pais, V., Bessa, J., Cunha, F., de Araújo Hsia, L., Mai, E.F., Sborchia, G., Fangueiro, R., 2025. Lignin-based coatings: a sustainable approach to produce antibacterial textiles. Int. J. Mol. Sci. 26, 1217.

[11] Figueirêdo, M.B., Deuss, P.J., Venderbosch, R.H., Heeres, H.J., 2019. Valorization of pyrolysis liquids: ozonation of the pyrolytic lignin fraction and model components. ACS Sustainable Chem. Eng. 7, 4755-4765.

[12] Friedrich, J., 2011. Mechanisms of plasma polymerization-reviewed from a chemical point of view. Plasma Process. Polym. 8, 783-802.

[13] Gierer, J., Yang, E.Q., Reitberger, T., 1994. On the significance of the superoxide radical in oxidative delignification, studied with 4- t-butylsyringol and 4- t-butylguaiacol. Part I. The mechanism of aromatic ring opening. Holzforschung 48, 405-414.

[14] Gouveia, J.R., Garcia, G.E.S., Antonino, L.D., Tavares, L.B., dos Santos, D.J., 2020. Epoxidation of Kraft lignin as a tool for improving the mechanical properties of epoxy adhesive. Molecules 25, 2513.

[15] Janů, L., Souawda, N., Anand, R., Duday, D., Medalová, J., Collard, D., Nečas, D., Polášková, K., Ryšánek, P., Thoman, J.S., Janůšová, M., Zajíčkov, L., 2026. Immobilization of lignin nano/microparticles on plasma-modified polymer nanofibers. Int. J. Biol. Macromol. 343, 150226.

[16] Latif, N.H.A., Brosse, N., Ziegler-Devin, I., Chrusiel, L., Hashim, R., Hussin, M.H., 2022. A comparison of alkaline and organosolv lignin extraction methods from coconut husks as an alternative material for green applications. BioResources 17, 469-491.

[17] Lee, C.M., Kubicki, J.D., Fan, B.X., Zhong, L.H., Jarvis, M.C., Kim, S.H., 2015. Hydrogen-bonding network and OH stretch vibration of cellulose: comparison of computational modeling with polarized IR and SFG spectra. J. Phys. Chem. B 119, 15138-15149.

[18] Li, W.Q., Zhang, Y., Das, L., Wang, Y.K., Li, M., Wanninayake, N., Pu, Y.Q., Kim, D.Y., Cheng, Y.T., Ragauskas, A.J., Shi, J., 2018. Linking lignin source with structural and electrochemical properties of lignin-derived carbon materials. RSC Adv. 8, 38721-38732.

[19] Liu, K., Wang, C.Y., Hu, H.M., Lei, J.Z., Han, L., 2016. Indirect treatment effects of water-air MHCD jet on the inactivation of Penicillium digitatum suspension. IEEE Trans. Plasma Sci. 44, 2729-2737.

[20] Lommatzsch, U., Pasedag, D., Baalmann, A., Ellinghorst, G., Wagner, H.E., 2007. Atmospheric pressure plasma jet treatment of polyethylene surfaces for adhesion improvement. Plasma Process. Polym. 4, S1041-S1045.

[21] Miranda, F., Caliari, F., Essiptchouk, A., Pertraconi, G., 2019. Atmospheric plasma spray processes: from micro to nanostructures. Atmospheric Pressure Plasma -From Diagnostics to Applications. IntechOpen, London.

[22] Mobredi, K., Miranda-Valdez, I.Y., Mäkinen, T., Koivisto, J., Alava, M.J., 2024. A simple approach to produce hydrophobic biobased coatings using methylcellulose and organosolv lignin. Soft Matter 20, 5607-5615.

[23] Nagy, M., Kosa, M., Theliander, H., Ragauskas, A.J., 2010. Characterization of CO₂ precipitated Kraft lignin to promote its utilization. Green Chem. 12, 31-34.

[24] Norgren, M., Notley, S.M., Majtnerova, A., Gellerstedt, G., 2006. Smooth model surfaces from lignin derivatives. I. Preparation and characterization. Langmuir 22, 1209-1214.

[25] Offerhaus, B., Lackmann, J.W., Kogelheide, F., Bracht, V., Smith, R., Bibinov, N., Stapelmann, K., Awakowicz, P., 2017. Spatially resolved measurements of the physical plasma parameters and the chemical modifications in a twin surface dielectric barrier discharge for gas flow purification. Plasma Process. Polym. 14, 1600255.

[26] Qu, C., Mikame, K., Ohashi, Y., Nishimura, H., Koike, K., Watanabe, T., 2025. Characterization of an oligomeric lignin-derived UV absorber produced from hardwood beech. ACS Omega 10, 22960-22969.

[27] Righetti, G.I.C., Faedi, F., Famulari, A., 2024. Embracing sustainability: the world of bio-based polymers in a mini review. Polymers (Basel) 16, 950.

[28] Scopece, P., Viaro, A., Sulcis, R., Kulyk, I., Patelli, A., Guglielmi, M., 2009. SiO_x-based gas barrier coatings for polymer substrates by atmospheric pressure plasma jet deposition. Plasma Process. Polym. 6, S705-S710.

[29] Seitz, J., Buschalsky, A., Reinders, P.M., Mai, C., Viöl, W., Köhler, R., 2024. Generation of a lignin-polyester coating for the corrosion protection of steel surfaces applied by atmospheric plasma spraying. Prog. Org. Coat. 194, 108598.

[30] Sharma, S., Kumar, A., 2020. Lignin: Biosynthesis and Transformation for Industrial Applications. Springer International Publishing, Cham.

[31] Souza, J.R., Araujo, J.R., Archanjo, B.S., Simão, R.A., 2019. Cross-linked lignin coatings produced by UV light and SF₆ plasma treatments. Prog. Org. Coat. 128, 82-89.

[32] Tian, Z.B., Zong, L., Niu, R.J., Wang, X., Li, Y., Ai, S.Y., 2015. Recovery and characterization of lignin from alkaline straw pulping black liquor: as feedstock for bio-oil research. J. Appl. Polym. Sci. 132, 42057.

[33] Wang, D., Claesson, P., Zhang, F., Pan, J.S., An, R., Shi, Y.J., 2025. Recent findings on lignin-based wear and corrosion resistance coatings. Corros. Rev. 43, 157-174.

[34] Wulf, G., Mayer, B., Lommatzsch, U., 2022. Plasma co-polymerization of HMDSO and limonene with an atmospheric pressure plasma jet. Plasma 5, 44-59.

[35] Xi, W.H., Zhang, H.X., Ren, W.X., Li, J.W., Chen, N., Chen, M., Han, W., Cheng, C., 2025. Mechanisms of OH and H₂O₂ formation in the liquid phase induced by an atmospheric pressure plasma jet with oxygen introduction. Phys. Plasmas 32, 083505.

[36] Zagidullin, M.V., Khvatov, N.A., Medvedkov, I.A., Tolstov, G.I., Mebel, A.M., Heaven, M.C., Azyazov, V.N., 2017. O₂(b¹Σ_g⁺) quenching by O₂, CO₂, H₂O, and N₂ at temperatures of 300-800 K. J. Phys. Chem. A 121, 7343-7348.

[37] Zhu, J.J., Zhu, M.Q., Sun, H., 2026. Valorizing lignin through solvent-free plasma modification for high-performance polylactic acid bioplastics. Bioresour. Technol. 448, 134293.