Scalable ultrastrong bamboo strips via interfacial homogeneous fusion

Abstract

Ultrastrong bamboo is a lightweight, high-strength material with application potential exceeding that of natural bamboo. However, its high strength is not preserved in longer macroscopic assemblies for practical applications, which exhibit substantially inferior tensile strength (~363 MPa). To address this challenge, we designed a scalable ultrastrong bamboo strip (SUS-bamboo) featuring a structure with interfacial homogeneous fusion through a self-reinforcing strategy. This enhancement was achieved by a significant increase in the interfacial hydrogen-bond density via the synergistic effect of exposed nanofibers on the fiber surface and in situ dissolved regenerated cellulose nanofibrils. The SUS-bamboo exhibited a tensile strength of 942 MPa in macroscopic assembled form, which was 3.5 times that of the conventional assembly. The lower-cost, node-containing, scalable ultrastrong bamboo achieved a tensile strength of 553 MPa (two-layer bonded). This study provided an advanced strategy for the design and application of sustainable bamboo composites.

Keywords

Highly scalable / Ultrahigh-strength / Environmentally friendly / Bamboo strips

References

[1] Bai, T., Yan, J., Lu, J.Q., Zhou, J., Yao, H., He, X.W., Gu, S.H., Tong, Z.H., Shi, S.Q., Li, J., Cheng, W.L., Wang, D., Han, G.P., Chen, C.J., 2025. Engineering transverse cell deformation of bamboo by controlling localized moisture content. Nat Commun 16, 4077.

[2] Chaudhary, U., Malik, S., Rana, V., Joshi, G., 2024. Bamboo in the pulp, paper and allied industries. Adv Bamboo Sci 7, 100069.

[3] Chen, C.J., Li, Z.H., Mi, R.Y., Dai, J.Q., Xie, H., Pei, Y., Li, J.G., Qiao, H.Y., Tang, H., Yang, B., Hu, L.B., 2020. Rapid processing of whole bamboo with exposed, aligned nanofibrils toward a high-performance structural material. ACS Nano 14, 5194-5202.

[4] Chen, L., Huang, B., Wang, X.K., Fang, C.H., Zhang, X.B., Fei, B.H., 2022. Study on gluing characteristics of bamboo pith ring. Ind Crops Prod 178, 114624.

[5] Chen, M.L., Weng, Y., Semple, K., Zhang, S.X., Hu, Y.A., Jiang, X.Y., Ma, J.X., Fei, B.H., Dai, C.P., 2021. Sustainability and innovation of bamboo winding composite pipe products. Renew Sustain Energy Rev 144, 110976.

[6] Chen, L., Xia, L.M., Chen, Q., Jiang, M.H., Yuan, J., Xie, J.L., 2025. In-situ surface liquefaction strategy for bamboo bonding with high-performance. Compos Part B Eng 297, 112288.

[7] Dong, X.F., Gan, W.T., Shang, Y., Tang, J.F., Wang, Y.X., Cao, Z.F., Xie, Y.J., Liu, J.Q., Bai, L., Li, J., Rojas, O.J., 2022. Low-value wood for sustainable high-performance structural materials. Nat Sustain 5, 628-635.

[8] Gong, X.Y., Liu, T.L., Yu, S.S., Meng, Y., Lu, J., Cheng, Y., Wang, H.S., 2020. The preparation and performance of a novel lignin-based adhesive without formaldehyde. Ind Crops Prod 153, 112593.

[9] Han, S.Y., Chen, F.M., Ye, H.Z., Zheng, Z.F., Chen, L.B., Wang, G., 2023. Bamboo-inspired renewable, high-strength, vibration-damping composites for structural applications. ACS Sustainable Chem Eng 11, 1146-1156.

[10] Han, S.Y., Zhao, X., Li, X.P., Ye, H.Z., Wang, G., 2024. Synergistic in-situ reinforcement of lignin and adhesive for high-performance aligned bamboo fibers composites. J Mater Res Technol 28, 879-890.

[11] Huang, Z.L., Cao, Z.R., Chen, Y.F., Zhu, M.W., 2025a. An ultrastrong and ultraflexible wood veneer via fiber interaction enhancement and defect reduction. ACS Nano 19, 17385-17392.

[12] Huang, Z.L., Cao, Z.R., Wang, Y.K., Tang, J.Y., Chen, L.H., Qian, S.W., Yan, X.J., Deng, Y., Chen, Y.F., Zhu, M.W., 2025b. Adhesive-free, light, and strong particle board. Nano Lett 25, 868-875.

[13] Jia, Q.D., Guan, M.J., Qian, S., Wu, M.Y., Che, P.L., Liu, X., 2025. Shear behavior and strain transmission mechanism in bonding interface of robust toughened epoxy/flattened bamboo composites. Compos Part B Eng 297, 112334.

[14] Jung, S.H., Kim, K.Y., Lee, J.H., Moon, C.J., Han, N.S., Park, S.J., Kang, D.M., Song, J.K., Lee, S.S., Choi, M.Y., Jaworski, J., Jung, J.H., 2017. Self-assembled Tb³⁺ Complex probe for quantitative analysis of ATP during its enzymatic hydrolysis via time-resolved luminescence in vitro and in vivo. ACS Appl Mater Interfaces 9, 722-729.

[15] Kumar, A., Vlach, T., Laiblova, L., Hrouda, M., Kasal, B., Tywoniak, J., Hajek, P., 2016. Engineered bamboo scrimber: influence of density on the mechanical and water absorption properties. Constr Build Mater 127, 815-827.

[16] Li, C.M., Ren, X.Y., Han, S.Y., Li, Y.X., Chen, F.M., 2024. The preparation and performance of bamboo waste bio-oil phenolic resin adhesives for bamboo scrimber. Forests 15, 79.

[17] Li, X.P., Ye, H.Z., Han, S.Y., Li, M.P., Lin, H.Q., Wang, G., 2023. Effects of bamboo nodes on mechanical properties of thin-type bamboo bundle laminated veneer lumber (BLVL): from anatomical structure to penetration mechanism. Ind Crops Prod 203, 117119.

[18] Li, Z.H., Chen, C.J., Mi, R.Y., Gan, W.T., Dai, J.Q., Jiao, M.L., Xie, H., Yao, Y.G., Xiao, S.L., Hu, L.B., 2020. A strong, tough, and scalable structural material from fast-growing bamboo. Adv Mater 32, 1906308.

[19] Li, Z.H., Chen, C.J., Xie, H., Yao, Y., Zhang, X., Brozena, A., Li, J.G., Ding, Y., Zhao, X.P., Hong, M., Qiao, H.Y., Smith, L.M., Pan, X.J., Briber, R., Shi, S.Q., Hu, L.B., 2022. Sustainable high-strength macrofibres extracted from natural bamboo. Nat Sustain 5, 235-244.

[20] Lian, H.Y., Zhang, Y.H., Zhou, Z.Z., Xu, Y.T., Gu, Z.K., Zhang, X.C., Bi, H.J., 2023. Fabrication of high specific strength densified bamboo materials using a facile and sustainable method. J Mater Sci 58, 7011-7024.

[21] Liang, L.L., Zheng, Y., Wu, Y.T., Yang, J., Wang, J.J., Tao, Y.J., Li, L.Z., Ma, C.L., Pang, Y.J., Chen, H., Yu, H.W., Shen, Z.H., 2021. Surfactant-induced reconfiguration of urea-formaldehyde resins enables improved surface properties and gluability of bamboo. Polymers (Basel) 13, 3542.

[22] Meng, T.T., Ding, Y., Liu, Y., Xu, L., Mao, Y.M., Gelfond, J., Li, S.K., Li, Z.H., Salipante, P.F., Kim, H., Zhu, J.Y., Pan, X.J., Hu, L.B., 2023. In situ lignin adhesion for high-performance bamboo composites. Nano Lett 23, 8411-8418.

[23] Nkeuwa, W.N., Zhang, J.L., Semple, K.E., Chen, M.L., Xia, Y.L., Dai, C.P., 2022. Bamboo-based composites: a review on fundamentals and processes of bamboo bonding. Compos Part B Eng 235, 109776.

[24] Ponnusamy, V.K., Nguyen, D.D., Dharmaraja, J., Shobana, S., Banu, J.R., Saratale, R.G., Chang, S.W., Kumar, G., 2019. A review on lignin structure, pretreatments, fermentation reactions and biorefinery potential. Bioresour Technol 271, 462-472.

[25] Qi, J.Q., Xie, J.L., Yu, W.J., Chen, S.M., 2015. Effects of characteristic inhomogeneity of bamboo culm nodes on mechanical properties of bamboo fiber reinforced composite. J For Res 26, 1057-1060.

[26] Qian, C., Wang, Y.T., Shi, C., Wang, H.Y., Yang, H.Y., Yang, J., Wang, D.W., Shi, Z.J., 2023. Development of all-cellulose sustainable composites from directionally aligned bamboo fiber scaffold with high strength, toughness, and low thermal conductivity. Chem Eng J 473, 145437.

[27] Saba, N., Jawaid, M., Alothman, O.Y., Paridah, M.T., 2016. A review on dynamic mechanical properties of natural fibre reinforced polymer composites. Constr Build Mater 106, 149-159.

[28] Sethupathy, S., Murillo Morales, G., Gao, L., Wang, H.L., Yang, B., Jiang, J.X., Sun, J.Z., Zhu, D.C., 2022. Lignin valorization: status, challenges and opportunities. Bioresour Technol 347, 126696.

[29] Shao, Z.P., Fang, C.H., Huang, S.X., Tian, G.L., 2009. Tensile properties of Moso bamboo (Phyllostachys pubescens) and its components with respect to its fiber-reinforced composite structure. Wood Sci Technol 44, 655-666.

[30] Sharma, B., Shah, D.U., Beaugrand, J., Janeček, E.R., Scherman, O.A., Ramage, M.H., 2018. Chemical composition of processed bamboo for structural applications. Cellulose 25, 3255-3266.

[31] Shi, J.J., Li, Z.Z., Chen, H., Wu, Z.H., Ji, J.G., Xia, C.L., Wang, H.K., Zhong, T.H., 2024. Optimizing processing strategies for eco-friendly bamboo curved components: insights from bamboo internode and node differences. Ind Crops Prod 216, 118823.

[32] Tang, T., Chen, X.F., Zhang, B., Liu, X.M., Fei, B.H., 2019. Research on the physico-mechanical properties of Moso bamboo with thermal treatment in tung oil and its influencing factors. Materials (Basel) 12, 599.

[33] Wang, J.H., Wang, R.S., Ji, X.X., Jin, C.D., Yan, Y.T., 2023. Enhancing and toughening bamboo interfacial bonding strength by reactive hyperbranched polyethyleneimine modified phenol formaldehyde resin adhesive. J Mater Res Technol 26, 8213-8228.

[34] Wang, J., Wu, X.Y., Wang, Y.J., Zhao, W.Y., Zhao, Y., Zhou, M., Wu, Y., Ji, G.B., 2022. Green, sustainable architectural bamboo with high light transmission and excellent electromagnetic shielding as a candidate for energy-saving buildings. Nano-Micro Lett 15, 11.

[35] Xia, Y., Zuo, H.F., Lv, J.L., Wei, S.Y., Yao, Y.X., Liu, Z.G., Lin, Q.Q., Yu, Y.L., Yu, W.J., Huang, Y.X., 2023. Preparation of multi-layered microcapsule-shaped activated biomass carbon with ultrahigh surface area from bamboo parenchyma cells for energy storage and cationic dyes removal. J Clean Prod 396, 136517.

[36] Yang, Z., Liang, L.L., Dong, Q., Chen, F.R., Pang, Y.J., Chen, H., Wu, S., Shen, Z.H., 2024. A synergistic enhancement of the bonding performance of urea-formaldehyde adhesives using an organic-inorganic hybrid strategy. Eur J Wood Prod 82, 135-146.

[37] Yin, C.Y., Yang, H.X., Wang, J.J., Zhang, X., Ni, K.L., Ran, X., Wang, P., Du, G.B., Yang, L., 2025. Room-temperature curing of cellulose adhesive via freeze-thaw-induced in situ cross-linking for bonding wood or bamboo. ACS Sustainable Chem Eng 13, 3774-3784.

[38] Yu, Y., Jiang, Z.H., Fei, B.H., Wang, G., Wang, H.K., 2010. An improved microtensile technique for mechanical characterization of short plant fibers: a case study on bamboo fibers. J Mater Sci 46, 739-746.

[39] Yuan, T.C., Han, X., Wu, Y.F., Hu, S.H., Wang, X.Z., Li, Y.J., 2021. A new approach for fabricating crack-free, flattened bamboo board and the study of its macro-/micro-properties. Eur J Wood Prod 79, 1531-1540.

[40] Zhou, B.Z., Fu, M.Y., Xie, J.Z., Yang, X.S., Li, Z.C., 2005. Ecological functions of bamboo forest: research and application. J For Res 16, 143-147.

[41] Zhu, X.D., Xue, Y.Y., Qian, L., Mei, C.T., Gao, Y., 2025. Fabrication of self-bonding laminated bamboo via a dual-treatment method combining alkali treatment and hot pressing. Constr Build Mater 490, 142553.