Reconstruction and optimization of the operational workflow model in an inpatient pharmacy before and after implementation of a wireless communication-based intelligent drug dispensing and traceability system

Xin-ling Liu , Ling Li , Xiao-ye Cao , Jia-ying Tu , Bo Yuan

Intelligent Pharmacy ›› 2026, Vol. 4 ›› Issue (3) : 211 -216.

PDF (4202KB)
Intelligent Pharmacy ›› 2026, Vol. 4 ›› Issue (3) :211 -216. DOI: 10.1016/j.ipha.2026.03.002
Full length article
Reconstruction and optimization of the operational workflow model in an inpatient pharmacy before and after implementation of a wireless communication-based intelligent drug dispensing and traceability system
Author information +
History +
PDF (4202KB)

Abstract

Objective: This study aimed to assess workflow changes and identify optimization strategies following the implementation of a wireless communication-based intelligent drug dispensing and traceability system (IDDTS) in an inpatient pharmacy setting, with the goal of improving operational efficiency and the accuracy of medication order processing and dispensing.

Methods: A pre–post observational study was conducted over two consecutive 30-working-day periods before and after IDDTS implementation to document changes in the medication order dispensing workflow. User Journey Mapping and Root Cause Analysis were employed to investigate potential causes of the low utilization of the IDDTS for processing one-time medication orders. Based on the findings, the workflow for one-time medication orders was redesigned and optimized. The effectiveness of these interventions was evaluated by comparing key performance indicators before and after the process reconstruction.

Results: The implementation of the IDDTS, together with workflow redesign and optimization, reduced redundant steps and improved medication order dispensing performance, including workflow efficiency and dispensing accuracy. Utilization of the system for one-time medication orders and overall staff satisfaction also improved.

Conclusions: The IDDTS shows considerable potential to streamline inpatient pharmacy dispensing operations and support workflow optimization for medication order processing and distribution. Further refinements are recommended to fully realize its benefits in routine practice.

Graphical abstract

Keywords

Intelligent drug dispensing and traceability system (IDDTS) / Inpatient pharmacy / Dispensing workflow mode / Wireless communication technology / System optimization

Cite this article

Download citation ▾
Xin-ling Liu, Ling Li, Xiao-ye Cao, Jia-ying Tu, Bo Yuan. Reconstruction and optimization of the operational workflow model in an inpatient pharmacy before and after implementation of a wireless communication-based intelligent drug dispensing and traceability system. Intelligent Pharmacy, 2026, 4 (3) : 211-216 DOI:10.1016/j.ipha.2026.03.002

登录浏览全文

4963

注册一个新账户 忘记密码

1 Introduction

Medication dispensing provided by the inpatient pharmacy is an essential component of the patient care process, with dispensing efficiency and quality serving as key indicators of healthcare service delivery. Against a backdrop of continuously expanding drug formularies and rising medication order volumes, traditional pharmacy workflow models face growing challenges. In recent years, many hospitals in China have partnered with third-party pharmaceutical logistics companies, which offer a range of services across the pharmaceutical value chain and deliver information system–enabled services with an emphasis on digitalization and intelligent automation.1

The supply processing distribution (SPD) program was introduced at our hospital in 2014.2,3 It leveraged information systems to enable the sharing of medication-related information. The core of the SPD program was barcode-enabled traceability in the dispensing process. In combination with automated tablet packaging machines, the program facilitated a technology-supported upgrade of pharmacy operations and initially improved inpatient pharmacy dispensing efficiency.4 Over more than a decade of SPD operation, we observed that barcode technology enabled several functions during inpatient medication order processing and fulfillment, including centralized intravenous admixture services, unit-dose dispensing of oral medications for wards, medication delivery to wards, and batch/lot number tracking for medications requiring special control. However, reliance on barcode scanning also increased the number of operational steps required of pharmacists. Medication order dispensing and distribution in the inpatient pharmacy differ from warehouse logistics. The pharmacy performs not only inventory management, including secondary stock functions such as stock receipt, stock issuance, and internal transfers, but also dispensing and distribution for clinical wards to meet time-sensitive and varied clinical medication needs. It handles medications with diverse dosage forms and regulatory requirements while accommodating multiple clinical use scenarios (e.g., treatment, examinations, and surgery). Under these conditions, relying on barcode scanning alone is no longer sufficient to address the complexity of medication order processing and fulfillment.

Therefore, in March 2025, our hospital introduced a wireless communication-based intelligent drug dispensing and traceability system (IDDTS) into the existing workflow. This system is primarily based on wireless communication, radio frequency identification (RFID), high-definition video camera verification, and mobile touch-screen technologies. It enables functions such as medication bin-location prompting, dispensing task assignment, intelligent dispensing verification, traceability across dispensing and ward delivery, and ward nurse confirmation.5 By reducing steps such as barcode scanning and manual checking, the system alleviated the operational burden on pharmacists. Its design aligns with pharmacists’ routine workflows, which may facilitate adoption.

Following implementation, we observed that pharmacists were willing to use the system for processing scheduled medication orders, which are typically processed in large, centralized batches, but were reluctant to use it for time-sensitive one-time medication orders (here-after referred to as one-time medication orders) from different wards. Moreover, the constrained workspace required pharmacists to operate equipment while simultaneously handling medications, which further reduced efficiency. By employing Journey Mapping and Root Cause Analysis, this study aims to identify underlying causes and implement targeted improvements to address the low efficiency of system use for processing and dispensing one-time medication orders.

2 Subjects and methods

2.1 Study subjects

Our institution is a Class A tertiary general teaching hospital with 1,200 operational beds and approximately 65,000 inpatient admissions annually. Prior to IDDTS implementation, the dispensing of injectable and topical medications in the inpatient pharmacy used the SPD program (developed by Shanghai Tongyu Information Technology Co., Ltd.), which was integrated into the hospital information system. The SPD program supported batch- and ward-based dispensing, distribution, and ward delivery of injectable and topical medications, establishing a barcode-based closed-loop management process. Dispensing data on inpatient medication orders for May and June 2025 were extracted from the hospital's SPD information system. May 1–30, 2025, represented the pre-intervention period, and June 1–30, 2025, represented the post-intervention period, with the intervention defined as a workflow improvement targeting dispensing of large-volume centralized medication orders.

2.2 Research methods

2.2.1 Journey Mapping and Root Cause Analysis

For dispensing one-time medication orders, pharmacists still showed a preference for the original workflow. Feedback from pharmacists indicated that when using the IDDTS for one-time medication orders originating from multiple wards and occurring sporadically, the system was unable to consolidate tasks into batches, leading pharmacists to perform repeated dispensing steps. In addition, the system's physical footprint made it inconvenient for pharmacists to operate in a confined workspace.6,7

Therefore, this study employed the Journey Mapping method (Fig. 1) to map touchpoints throughout the dispensing process in real-world scenarios. Pharmacists’ feedback on system use for one-time medication orders was then analyzed. Based on the feedback, the 5 Whys tool as part of Root Cause Analysis was applied to identify the underlying reasons for pharmacists' reluctance to use the system. Finally, corre-sponding improvement measures were developed to optimize the workflow (Fig. 2).

Following implementation of the IDDTS, the steps of printing and scanning the dispensing list were no longer required, reducing workflow steps. Pharmacists now receive ward-specific dispensing information directly via the dispensing operating system. Pharmacists dispense medications using a mobile dispensing cart, guided by on-screen prompts that provide picking guidance and information on dispensing progress, including completed and pending tasks. High-definition cameras record the entire dispensing process, facilitating post-dispensing review by pharmacists. If a ward has any questions about the dispensed medications, issues can be identified promptly through video playback. The dispensing workflow after implementation of the IDDTS is illustrated in Fig. 3.

2.2.2 Workflow optimization for dispensing inpatient one-time medication orders using the IDDTS

An analysis of the existing workflow revealed a common issue reported by pharmacists: when dispensing one-time medication orders for multiple wards, the system remained in a preset mode designed for large-volume, centralized medication orders, and lacked the function-ality to consolidate tasks into batches. Additionally, tasks could only be received when dispatched from the workstation (PC) interface; pharmacists were unable to use the task display screen on the mobile dispensing cart equipped with weighing verification—a key component of the system—to manually select, accept, and dispense tasks. The cart screen was limited to receiving a single task at a time, displaying medication images, and confirming task completion. It could not function as an interactive interface allowing pharmacists to receive tasks on demand, consolidate dispensing tasks, and feed task-status updates back to the workstation interface in real time.

One key aspect of this workflow redesign was establishing bidirectional data exchange of dispensing status between the inpatient pharmacy's SPD system and the IDDTS. This enhancement enabled the system not only to receive tasks but also to transmit real-time dispensing status updates back to the SPD system. As a result, redundant or duplicate instructions are reduced, and workflow steps are streamlined by minimizing confirmation barcode scans. Dispensing status is now communicated through click-and-confirm actions that better align with routine work practices.

Furthermore, the screen on the mobile dispensing cart was upgraded from a display-only terminal to a touch-screen interface. It now facilitates real-time information exchange with both the workstation of the IDDTS and the SPD system. This allows pharmacists to receive tasks directly at the cart and choose whether to accept or process them, which better fits the operational context. It reduces the need to move back and forth between the workstation and the dispensing cart, helping to prevent unnecessary congestion in the already constrained workspace.

The display interface was further optimized to address complex scenarios such as multi-ward dispensing and task consolidation. It now features a multi-window layout with toggleable views, replacing the cluttered single-screen stack of tasks that contributed to eye strain and distraction for pharmacists. All critical actions can be performed with one-handed operation, aligning with pharmacists’ routine work habits.

3 Results

3.1 Workflow changes in centralized medication dispensing for wards following IDDTS implementation

Statistics indicate that the inpatient pharmacy manages a total of 1,063 different medications, of which 641 are injectable and topical dosage forms centrally dispensed by pharmacists. On average, the pharmacy processes more than 150,000 medication order lines from 32 wards per day. Under the previous model, after a ward submitted a batch of medication orders, a pharmacist would confirm and print a dispensing list, scan a barcode to initiate manual dispensing, and then pick medications one by one according to the listed drug names and bin location codes on the ward-specific summary dispensing lists. Dispensed items were manually checked off on the paper list to prevent omissions. Once medications were placed in delivery containers, their arrangement often prevented an independent double-check by a second pharmacist. Verification therefore relied solely on the dispensing pharmacist's self-check and a subsequent check by the ward nurse, which could increase the risk of dispensing errors and may lead to disputes between wards and the pharmacy over error attribution.

3.2 Analysis of factors contributing to low utilization of the IDDTS for multi-ward one-time medication orders

While the implementation of the IDDTS resolved issues related to secondary verification and error confirmation for large-volume centralized medication orders, its utilization for dispensing one-time medication orders remained low. Based on Journey Mapping and the 5 Whys root cause analysis, the primary reasons were identified as follows:

① Lack of Data Interoperability: Data were not interoperable across the SPD system, the IDDTS workstation, and the cart-mounted mobile interface. Each ward-specific dispensing instruction had to be manually transmitted from the workstation to the mobile dispensing system. When medication orders originated from multiple wards, these steps had to be repeated, resulting in redundant workflow steps.

② Inability to Accommodate Incoming Medication Orders during Dispensing: During dispensing for one-time medication orders, newly received medication orders could not be added and processed immediately. Pharmacists had to complete the current task before initiating a new dispensing task for the incoming medication order.

③ Lack of Task Consolidation and Sorting Functionality: Dispensing for one-time medication orders often requires picking medications for multiple wards in one run and then sorting them by ward. The system lacked the functionality to consolidate multi-ward tasks for merged picking and subsequent sorting, which discouraged pharmacists from using it for one-time medication orders.

3.3 Reduced centralized dispensing time in wards

In this study, the Respiratory Department, which has a relatively high volume of inpatient medication orders in our hospital, was selected as an example. Data were collected during two 30-day periods (pre- and post-use) of the IDDTS to analyze the following parameters during centralized dispensing time windows: mean daily medication orders, mean daily dispensing time, and mean dispensing time per medication order per day.

Statistical analysis was performed using GraphPad Prism version 10.6. Comparisons between pre- and post-use groups were conducted using the paired t-test. Data were expressed as mean ± standard deviation (x¯−±s). AP-value < 0.05 was considered statistically significant. The results showed that after the implementation of the IDDTS, the mean dispensing time per medication order per day was significantly shortened, indicating a marked improvement in work efficiency. The details are shown inTable 1.

4 Discussion

The introduction of the IDDTS has transformed the dispensing process for centralized, large-volume ward medication orders. It replaced the manual approach—requiring barcode scanning for confirmation and manually checking off each item on printed dispensing lists—with an information exchange model enabled by wireless communication technology. Familiar elements, including mobile dispensing carts, chipenabled medication dispensing bins with built-in traceability, and cart-mounted instruction displaying screens, were retained, which allowed pharmacists to learn and adapt to the new system more easily. The design enabled adoption of the new equipment and workflows with minimal disruption to routine practice. In particular, integrated functionalities of weighing verification, barcode verification, and full-process video recording helped address challenges in medication double-checking and error attribution.

However, during dispensing for one-time medication orders, pharmacists encountered a key practical limitation: the dispensing interface on the mobile screen could receive tasks only when dispatched from the workstation, and the mobile system could not function as a real-time terminal for independent task reception and information exchange. One-time medication orders are often characterized by multi-ward origin, urgency, and high frequency. Under a workflow designed for bulk scheduled medication orders—where a new task can be initiated only after the current task is completed—pharmacists must repeat the same operation cycles, which does not align with real-world dispensing scenarios and increases workflow burden. As a result, pharmacists were reluctant to use the system for one-time medication orders. Therefore, this study focused on operational-mode optimization and workflow redesign. The key intervention was upgrading the cart-mounted mobile display to an operational interface. This enables pharmacists to receive new tasks in real-time during dispensing, decide whether to consolidate incoming tasks with the current workflow or defer it until completion. Furthermore, the interface was optimized for concurrent tasks. Pharmacists can switch between tiled and stacked layouts with one-handed touch-screen operation, thereby improving usability and sup-porting faster familiarization with the interface.

Importantly, dispensing pharmacists were involved throughout the optimization and redesign process. The comparison of the one-time medication order dispensing process pre- and post-optimization is presented in Fig. 4. This participation accelerated system familiarization and shortened the post-implementation transition period, thereby minimizing operational issues and promoting sustained use and acceptance. Through workflow review and redesign across diverse scenarios, the system was better aligned with pharmacists’ routine working environment while addressing low utilization for one-time medication orders.

In practice, the IDDTS experience suggests that successful adoption of any device or system should be human-centered. Pharmacists’ active participation, together with technology enablement, played a central role. Data-informed decisions, supported by workflow optimization and reconstruction, helped address system adoption challenges and low utilization for one-time medication orders. However, further improvements in efficiency may depend on continued optimization of formulary availability and supply, standardizing physician medication order entry, and establishing detailed contingency plans for system operation, information support, and equipment maintenance to mitigate downtime and operational disruptions.

References

[1]

Wang Junyao, Liu Xin, Fu Hangyu, Chen Guoqing. Research on the mechanism and path forEnhancing the resilience of the supply chainin the medical and health industry drivenby digitalization. Adv Soc Sci. 2024;13(1):502–511.

[2]

Zhang Hanyu, Guo Hong, Wang Aiying, et al. General medical consumables management practice based on third-party SPD logistics distribution supply chain model. China Med Dev. 2019;34(6):117–120.

[3]

Mahaiying You Jian, Yang Yue. Analysis and enlightenment of drug circulation model in America. J Shenyang Pharm Univ. 2006;(5):324–327.

[4]

Guo-hong LU, Ke-jian SU, Chen Bin, Sun Lin, Fang Yu. Pharmacy automation and smart management in our hospital. World Clin Drug. 2015;36(4):261–263.

[5]

Yang Shijiang, Wu Jinzeng, Xu Qing. Design of intelligent drug distribution system based on 2.4 GHz wireless communication technology. Wirel Int Sci Technol. 2023;(20):40–42.

[6]

You-chun Zhang. A brief analysis of psychological mechanism of dispensing error in hospital pharmacy. China Pharm. 2009;12(4):525–527.

[7]

Wang Feng, Dong Haiyan. Reconstruction and optimization of outpatient automatic medication dispensing system process based on information pharmacist technology. Herald Med. 2024;43(7):1151–1155.

Rights & permissions

2026 The Authors. Publishing services by Elsevier B.V. on behalf of Higher Education Press and KeAi Communications Co. Ltd. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).

PDF (4202KB)

0

Accesses

0

Citation

Detail

Sections
Recommended

/

〈 〉