Thanks for your kind interest in InfoMat. The submissions have to consist of content that has not been published or submitted for publication elsewhere except as a brief abstract in the proceedings of conferences or symposiums.

 

All the submissions will be handled and processed using the ScholarOne online submission system.
Once you have prepared your submission in accordance with the Guidelines, manuscripts should be submitted online at https://mc.manuscriptcentral.com/infomat.
The submission system will prompt you to use an ORCID ID (a unique author identifier) to help distinguish your work from that of other researchers as well as develop your personal profile in a worldwide platform.

A cover letter should be included in the ‘Cover Letter Field’ of the ScholarOne system. The text can be entered directly into the field or uploaded as a file.

The cover letter should contain:

 1. A statement confirming the paper has not been published or submitted for publication elsewhere except as a brief abstract in the proceedings of a scientific meeting or symposium.

 2. An acknowledgment that all authors have contributed significantly and in keeping with the latest guidelines of the International Committee of the Journal Editors, each author’s contribution to the paper is to be described, i.e., what role each author participated in.

 3. A statement confirming that all authors are in agreement with the content of manuscript.

In addition, the authors should state clearly the motivation behind and the novelty of their research in the cover letter. The authors also need to clarify the key results and the advances made compared with their previous work.

 

Microsoft Word templates for

• Research Article Template (MS word)
• Review Template (MS word)
• Guidelines for the Preparation of Figures 
• Guidlines for Graphic in Table of Contents (TOC)
• Guidelines for the Preparation of Front/Inside Cover (Copyright permission form is here)

InfoMat is an interdisciplinary and open-access journal that will address the growing scientific interest in new materials with unique electrical, optical and magnetic properties, and their applications in the rapid development of information technology. It will serve as a high-quality journal for researchers working in a wide variety of scientific areas and bring together the communities of materials science and information technology to contribute in this emerging field.

InfoMat is aimed at publishing experimental and theoretical approaches dealing with issues of advanced materials. It will particularly focus on the fabrication and characterization of materials with novel properties. The scope is internationally broad and falls within materials science, electrical electronics, and telecommunication categories. The journal recognizes the complexity of issues, and therefore particularly welcomes innovative interdisciplinary research with wide impact. The readership of the journal includes both researchers and engineers from academia and industry.

Description: The reports of original studies within the journal scope of InfoMat.

Word Limit: No strict word limits, however, it is better to be within 5,000 words including abstract but excluding references, tables and figures.
Abstract: Within 260 words, briefly describe the contents of the Research Article.
References: No word limits, but the American Medical Association (AMA) system of referencing should be used (see AMA Manual of Style for details).
Figures/tables: No number limits, but 10 figures/tables should be sufficient. The tables and figures should be submitted together with the main text of the article, and they should be properly prepared and numbered as describing here.

Keywords: Please provide 3-6 keywords to highlight the main involving subjects of the article.

Description: Review Articles are comprehensive analyses of a specific topic. They can be submitted either by the invitations from the Editors or by the authors themselves; both types will undergo the peer-review process prior to acceptance.

Word Limit: No strict word limits, however, it is better to be within 8,000 words including abstract but excluding references, tables and figures.
Abstract: Within 260 words, briefly describe the contents of the Review Article.
References: No word limits, but the American Medical Association (AMA) system of referencing should be used (see AMA Manual of Style for details)
Figures/tables: Minimum 1 table/figure in the Review. The tables and figures should be submitted together with the main text of the article, and they should be properly prepared and numbered as describing here.

Keywords: Please provide 3-6 keywords to highlight the main involving subjects of the article.

Biography: Please provide the first (or co-first) and corresponding authors' biographies. The biographies should include photographs, which are in 40 mm broad, 50 mm high, and better 600 dpi at minimum. It is recommended to keep the biography list as short as possible.

Description: Perspecctives are a forum for authors to discuss ideas from a personal viewpoint. They are more forward looking and/or speculative than Reviews. Perspectives can be submitted either by the invitations from the Editors or by the authors themselves; both types will undergo the peer-review process prior to acceptance.

Word Limit: No strict word limits, however, it is better to be within 8,000 words including abstract but excluding references, tables and figures.
Abstract: Within 260 words, briefly describe the contents of the Perspective.
References: No word limits. but the American Medical Association (AMA) system of referencing should be used (see AMA Manual of Style for details)
Figures/tables: Minimum 1 table/figure in the Perspective. The tables and figures should be submitted together with the main text of the article, and they should be properly prepared and numbered as describing here.

Keywords: Please provide 3-6 keywords to highlight the main involving subjects of the article.

Biography: Please provide the first (or co-first) and corresponding authors' biographies. The biographies should include photographs, which are in 40 mm broad, 50 mm high, and better 600 dpi at minimum. It is recommended to keep the biography list as short as possible.

Description: It is written by Editorial Board members, invited authors or editors.

Word Limit: 1,000 words maximum.
Abstract: Not required.

Figures/tables: Maximum 2 figure/tables. The figure/tables should be submitted together with the main text of the article, and they should be properly prepared and numbered as describing here.
References: Maximum 5 references. The American Medical Association (AMA) system of referencing should be used (see AMA Manual of Style for details).

Keywords: Not required.

InfoMat now offers Free Format submission for a simplified and streamlined submission process for New Submissions.
You do not need to reformat your manuscript for a new submission. However, authors are requested to follow the guidelines presented here when preparing their Revised Manuscripts.

 

Before you submit, you will need:

• Your manuscript: this should be an editable file including text, figures, and tables, or separate files – whichever you prefer. All required sections should be contained in your manuscript, including abstract (which does need to be correctly styled), introduction, methods, results, and conclusions. Figures and tables should have legends. Figures should be uploaded in the highest resolution possible. References may be submitted in any style or format, as long as it is consistent throughout the manuscript. You can find the recommended format below. Supporting information should be submitted in separate files. If the manuscript, figures or tables are difficult for you to read, they will also be difficult for the editors and reviewers, and the editorial office will send it back to you for revision. Your manuscript may also be sent back to you for revision if the quality of English language is poor.
• An ORCID ID, freely available at https://orcid.org. (Why is this important? Your article, if accepted and published, will be attached to your ORCID profile. Institutions and funders are increasingly requiring authors to have ORCID IDs.)
• The title page of the manuscript, including:
• Your co-author details, including affiliation and email address. (Why is this important? We need to keep all co-authors informed of the outcome of the peer review process.)
• Statements relating to our ethics and integrity policies, which may include any of the following (Why are these important? We need to uphold rigorous ethical standards for the research we consider for publication):

• • • data availability statement
    • funding statement
    • conflict of interest disclosure
    • ethics approval statement
    • patient consent statement
    • permission to reproduce material from other sources
    • clinical trial registration

To submit, login at https://mc.manuscriptcentral.com/infomat and create a new submission. Follow the submission steps as required and submit the manuscript.

General

In general, the submission file should be prepared in the WORD format and should be presented in the following order:

Title - Author(s) - (Dedication) - Affliliation(s) - Keywords - Abstract - Main text [including Figures, Schemes and Tables] [Each Figure/Scheme completes with figure legend, and each table completes with title and footnotes] - (Experimental/Methods Section) - Acknowledgements - References - (Biographies) - Table of Contents - Supporting Information (if relevant)
[Sections in brakets are only presented in certain article types.] [Supporting Information should be supplied as separate files.]

Manuscripts must be written in American English and be grammatically and linguistically correct. Authors should seek assistance with style, grammar and vocabulary if necessary.
Please note: Wiley provides a professional language and manuscript editing service, with expert help in English language editing, translation service, manuscript formatting, and figure preparation. For detailed information, costs and instructions please go to: Wiley Editing Services.

The structure and compositions of all materials central to the manuscript must be disclosed in the main text or in Supporting Information, this includes commercial and proprietary products, pure materials, and mixtures. Manuscripts reporting results using undisclosed material compositions may not be considered for publication and may be returned without external review.

Symbols for physical quantities should be italicized, but their units should not be written in italics. As examples: T for temperature with K as the unit, in contrast to T for the unit Tesla; J with units Hz, a with units nm. Stereochemical information (cis, E, R, etc.; d, L), locants (N-methyl), symmetry groups and space groups (C_2v), and prefixes in formulae or compound names (tBu and tert-butyl) must be in italics. Latin phrases such as “in situ” should not be italicized. Formula numbers should be bold (Arabic numerals and, if necessary, Roman lowercase letters). Labels of axes labels should be formatted as "variable [units]", e.g., T [K] where the variable is in italics and the units are enclosed in square brackets and in upright type.

Equations should be labeled with consecutive numbers and mentioned by label in the text, for example, “Equation (1).” They should be provided in an editable format – use symbols or an equation editor – do not embed as graphics.

Vectors must be in bold italic letters and tensors in bold letters (both in the text and in equations).

Please distinguish carefully between subscripts, superscripts, and special symbols. Units (e.g. V cm^–1, K, Pa etc.) should be written in upright letters (not in italics) with a short space to the number before.

Please use SI units throughout. Mathematical functions which are tabulated (e.g., sin, cos, exp, e, etc.) should be given in upright letters (not in italics).

Physical data should be arranged as follows, where possible:

• p./b.p. 20 °C
• [α]_D²⁰ = −13.5 (c = 0.2 in acetone) (a unit has to be given if it is different from deg cm³ g⁻¹ dm⁻¹ for [α] and from g cm⁻³ for c)
• ¹H NMR (200 MHz, [D₈]THF, 25 °C, TMS): δ = 1.3 (q, ³J(H,H) = 8 Hz, 2 H; CH₂), 0.9 ppm (t, ³J(H,H) = 8 Hz, 3 H; CH₃)
• IR(Nujol): u= 1790 cm^–1 (C=O)
• UV–vis (n-hexane): λ_max(ε) = 320 (5000), 270 nm (12 000)
• MS (70 eV): m/z (%): 108 (20) [M⁺], 107 (60) [M⁺–H], 91 (100) [C₇H₇⁺]
• Plane angles in products of units can have either ° or deg as the unit

In addition, when quoting physical data, the following should be considered:

• data should be quoted with decimal points and negative exponents (e.g., 25.8 J K⁻¹ mol⁻¹)
• the order should remain consistent throughout the manuscript
• when measurement conditions remain unchanged, they need only be mentioned once, for instance in column headings

Nomenclature should conform to the current American usage. The rules and recommendations of the International Union of Pure and Applied Chemistry (IUPAC), the International Union of Biochemistry (IUB), and the International Union of Pure and Applied Physics (IUPAP) should be followed. The Latin names of biological species and genera should be written in italics, with the full name always used when it appears for the first time in the text (e.g., Homo sapiens); the abbreviated form (e.g., H. sapiens) may be used thereafter.

Abbreviations and acronyms should be used sparingly and consistently. Where they first appear in the text, the complete term should also be given. Common acronyms such as bp, DNA, RNA, NMR, UV–vis., wt, do not need to be defined.

The manuscript should start with the following:

1. The title of the article. This should clearly describe the research using relevant keywords and it should avoid catchy but non-descriptive phrases. The first letters of all words, except coordinating conjunctions, articles, and prepositions, should be capitalized. No references should be cited. Chemical and mathematical formulae should be avoided in the title, as they may lead to difficulties when the title is integrated into databases. The title should not contain abbreviations;
2. A short running title of less than 40 characters;
3. A complete list of authors with the first name, middle initial(s), and surname of each author. An asterisk should be used to indicate each corresponding author (further symbols to indicate the affiliation(s) should not be used). A dedication line is optional;
4. A full list of affiliations for all authors. These should include: the names of all authors associated with each affiliation (with all first names as initials) and the complete postal address. An institutional/company email address must be provided for all corresponding authors. The present address of any author, if different from that where the work was carried out, should be supplied in a footnote.

The American Medical Association (AMA) system of referencing should be used see the - AMA Manual of Style for details. All references should be numbered consecutively in order of appearance and should be as complete as possible. In text citations should cite references in consecutive order using Arabic superscript numerals. Sample references follow:

In-Text examples:
Diabetes mellitus is associated with a high risk of foot ulcers.^1-3
Several interventions have been successful at increasing compliance.^11,14-16
The data of Smith et al¹⁸ is further evidence of this effect.
As reported previously,^1,3-6
The results were as follows⁴:

Journal article (1-6 authors):
1. King VM, Armstrong DM, Apps R, Trott JR. Numerical aspects of pontine, lateral reticular, and inferior olivary projections to two paravermal cortical zones of the cat cerebellum. J Comp Neurol. 1998; 390:537-551.

Journal article with more than six authors:
2. Geller AC, Venna S, Prout M, et al. Should the skin cancer examination be taught in medical school? Arch Dermatol. 2002;138:1201-1203.

Journal article with no named author or group name:
3. Centers for Disease Control and Prevention (CDC). Licensure of a meningococcal conjugate vaccine (Menveo) and guidance for use--Advisory Committee on Immunization Practices (ACIP), 2010. MMWR Morb Mortal Wkly Rep. 2010;59:273.

Online articles not yet published in an issue:
4. Smith JJ, Fihn SD, White RH. Treatment of allergic rhinitis. Am J Med. In press; doi:10.1016/S0002-9343(00)00545-3.

Book:
5. Voet D, Voet JG. Biochemistry. New York: John Wiley & Sons; 1990. 1223 p.

Book chapter:
6. Guyton JL, Crockarell JR. Fractures of acetabulum and pelvis. In: Canale ST, ed. Campbell's Operative Orthopaedics. 10th ed. Philadelphia, PA: Mosby, Inc; 2003:2939-2984.

Electronic book:
7. Rudolph CD, Rudolph AM. Rudolph's Pediatrics. 21st ed. New York, NY: McGraw-Hill Companies; 2002. http://online.statref.com/Document/Document.aspx?DocID=1&StartDoc=1&EndDoc=1882&FxID=13&offset=7&SessionId=A3F279FQVVFXFSXQ. Accessed August 22, 2007.

Internet document:
8. American Cancer Society. Cancer Facts & Figures 2003. http://www.cancer.org/downloads/STT/CAFF2003PWSecured.pdf. Accessed March 3, 2003.

Please note that journal title abbreviations should conform to the practices of Chemical Abstracts.

Tables, Figures and Schemes
Tables should be provided with a brief legend and should only be subdivided by three horizontal lines (head rule, neck rule, foot rule). Tables should be self-contained and complement, but not duplicate, information contained in the text. They should be supplied as editable files, not pasted as images. Legends should be concise but comprehensive – the table, legend and footnotes must be understandable without reference to the text. All abbreviations must be defined in footnotes. Footnote symbols: †, ‡, §, ¶, should be used (in that order) and *, **, *** should be reserved for P-values. Statistical measures such as SD or SEM should be identified in the headings. Tables with only one or two columns and columns with only one or two entries are to be avoided. For footnotes in tables, Roman lowercase letters followed by a closing parenthesis should be used. All tables are numbered (Arabic numerals) in the sequence in which they are referred to in the text.

Each figure and scheme should have a caption and should be inserted in-line within the main text. All figures and schemes must be mentioned in the text in numerical order. Different types of atoms in structural chemistry figures should be clearly distinguishable (by color). The full word "Figure" should be used in all parts of the manuscript when figures are cited. Figure legends should be concise but comprehensive – the figure and its legend must have high readability. Include definitions of any symbols used and define/explain all abbreviations and units of measurement.

Vector graphic images such as plots, graphs, and line diagrams (including chemical structures) should either be embedded into a Word document or saved as a PDF, PS, or EPS file. Original files of graphical items prepared using ChemDraw or Photoshop may also be included. Bitmap graphic images such as photographs and electron microscope images should be saved as TIFF or PNG files; each figure part must have a resolution of at least 300 dpi (1000 pixels wide when the image is typeset at a single column width).

You should review the basic figure requirements for manuscripts for peer review, as well as the more detailed post-acceptance figure requirements.

Supporting Information is information that is not essential to the article but provides greater depth and background. It is generally hosted online and appears without editing or typesetting. It may include tables, figures, videos, datasets, etc. Succinct text and the necessary graphics for the Supporting Information must be submitted, where possible, as a separate document (i.e., Word, or PDF). The document should include the title and names of all the authors and a template that can be used to prepare this page is included in the manuscript template. Any graphics should be embedded into the Supporting Information file and should not be submitted as separate graphics files. The author must keep a copy of the Supporting Information and make this available to readers upon request. Other types of Supporting Information, e.g., multimedia files, raw data, code, etc., may be provided separately, with large files provided in a compressed file format, e.g., .zip or .rar. Please note, if data, scripts or other artefacts used to generate the analyses presented in the paper are available via a publicly available data repository, authors should include a reference to the location of the material within their paper. View Wiley’s FAQs on more details of Supporting Information.

Wiley Author Resources

Wiley has a range of resources for authors preparing manuscripts for submission available here. In particular, authors may benefit from referring to Wiley’s best practice tips on Writing for Search Engine Optimization.

5. EXPERIMENTAL DESIGN, DESCRIPTION, AND VALIDATION

Animal Experimentation

For detailed reporting of animal experimentation, the ARRIVE guidelines (hosted on the NC3Rswebsite, https://arriveguidelines.org/) should be followed. Manuscripts containing experiments using animals must include a statement in the Experimental Section to state that permission was obtained from the relevant national or local authorities. The institutional committees that have approved the experiments must be identified and the accreditation number of the laboratory or of the investigator must be given where applicable. If no such rules or permission are stipulated in the particular country where the research/experiments were carried out, this must be mentioned in the manuscript. Compliance with US Public Health Service’s Policy on Animal Research Advisory Committee Guidelines is strongly recommended.

Human Studies/Subjects and Clinical Samples

For manuscripts containing experiments with human subjects (including the testing of sensor/wearable technologies) or tissue samples from human subjects, a statement regarding appropriate Institutional Review Board (IRB)/Ethical Committee approval must be included. The informed consent of all participating subjects must be obtained, and a statement to indicate this must be included. Confirmation that the study conforms to recognized standards, such as the Declaration of Helsinki, is also required.

When reporting phase II and III clinical trials, reporting on tumor marker studies, or describing human biospecimens, authors should refer, respectively, to the relevant CONSORT statement, REMARK, or BRISQ guidelines. Prospective clinical trials must be registered in www.clinicaltrials.gov (or a similar public repository that matches the criteria established by ICMJE) prior to the start of patient enrollment. Trial registration numbers must be reported in the article.

Image Processing

Images submitted for publication must accurately represent the original data, and authors must provide, if requested by the editors, unprocessed and raw data to aid in the reviewing process. Images submitted should be minimally modified, and any modification to original raw data should be clearly and fully disclosed, either in the figure legends, the Experimental Section, or in the Supporting Information. This should include the software used and the settings and methods applied in manipulations.

Processing should be applied equally to the entire image and also to controls. Processing that obscures data or emphasizes certain regions at the expense of others should not be used. When used, false-color and nonlinear adjustments, such as gamma correction, deconvolution, filtering, thresholding, and projection, should be clearly indicated in the manuscript.

In the case of gels and blots, cropped images may be used when necessary for clarity and conciseness. These modifications must be clearly mentioned, and the full gels and blots should be provided as Supporting Information. A clear line should mark the boundary between different gels where these were cropped, and all important bands should be maintained in the image.

Statistical Analysis

Reported data should be representative and reproducible. For original research articles, a sub-section entitled "Statistical Analysis" should be included at the end of the Experimental Section that fully describes the following:

1. Pre-processing of data (e.g., transformation, normalization, evaluation of outliers),

2. Data presentation (e.g., mean ± SD),
3. Sample size/number of replicates (n) for each statistical analysis,
4. Statistical methods used to assess significant differences (name of the statistical test including one- or two-sided testing, testing level (i.e., alpha value, Pvalue), if applicable post-hoc test or any alpha adjustment, validity of any assumptions made for the chosen test),
5. Software used for statistical analysis.

All relevant figure and table legends should contain information on sample size/number of replicates (n), probability (P) value, the specific statistical test for each experiment, data presentation, and the meaning of the significance symbol.

A more detailed checklist can be found here: The Road to Better Presentation of Data: The Do’s and Don’ts

Data Sharing and Data Availability

InfoMat encourages authors to share the data and other artefacts supporting the results in the paper by archiving it in an appropriate public repository. Authors may provide a data availability statement, including a link to the repository they have used, in order that this statement can be published in their paper. Shared data should be cited. All accepted manuscripts may elect to publish a data availability statement to confirm the presence or absence of shared data. If you have shared data, this statement will describe how the data can be accessed, and include a persistent identifier (e.g., a DOI for the data, or an accession number) from the repository where you shared the data. You may use the Standard Templates for Author Use or draft your own.

When data is available and linked, authors will need to provide a citation of the data in their reference list.

Data citation:

[dataset]Authors; Year; Dataset title; Data repository or archive; Version (if any); Persistent identifier (e.g., DOI)

The term [Dataset] will be removed before publication.

To help choose an appropriate data repository for your research, you may consider the following:

• Visit re3data.org or for extensive catalogues of registered and certified data repositories
• Some funders have designated archives set up for researchers to deposit their data. Check our Author Compliance Tool to see your funder’s data sharing policy.

Some example repositories are as follows:

Nucleotide sequence data can be submitted in electronic form to any of the three major collaborative databases: DNA Data Bank of Japan (DDBJ), EMBL Nucleotide Archive, or GenBank. It is only necessary to submit to one database as data are exchanged between DDBJ, EMBL, and GenBank on a daily basis

Proteins sequence data should be submitted to either of the following repositories: Protein Information Resource (PIR) or SWISS-PROT.

For manuscripts describing structural data, atomic coordinates and the associated experimental data should be deposited in the appropriate databank (see below). Data in databanks must be released, at the latest, upon publication of the article. Please ensure that atomic coordinates and experimental data are released on time.

• Organic, organometallic and inorganic compounds: Crystallographic data should not be sent as Supporting Information, but should be deposited with the joint Cambridge Crystallographic Data Centre (CCDC)/Fachinformationszentrum (FIZ) Karlsruhe online deposition service
• Proteins and nucleic acids: Protein Data Bank
• NMR spectroscopy data: BioMagResBank

For more information, check Wiley’s Data Sharing Policies and our Frequently Asked Questions page.

Data Citation

Please review Wiley’s Data Citation policy.

The acceptance criteria for all papers are the quality and originality of the research and its significance to our readership. Except where otherwise stated, manuscripts are single-blind peer reviewed. Papers will only be sent to review if the Editor-in-Chief determines that the paper meets the appropriate quality and relevance requirements.

Wiley's policy on confidentiality of the review process is available here.

Manuscripts are assigned sequentially to Associate Editors. An Associate Editor solicits reviewers (typically, two external reviews are sought). The reviewers’ evaluations and Associate Editor’s comments are compiled by the Editor-in-Chief for disposition and transmittal to the authors. The Associate Editor will advise authors whether a manuscript is accepted, should be revised or is rejected. Minor revisions are expected to be returned better within two weeks of decision; major revisions better within four weeks. Manuscripts not revised within the time periods of three months are subject to withdrawal from consideration for publication unless the authors can provide extenuating circumstances.

A number of manuscripts will have to be rejected on the grounds of priority and available space. A manuscript may be returned to the authors without outside review if the Editor-in-Chief and Associate Editor find it inappropriate for publication in the Journal. Similarly, the Editors may expedite the review process for manuscripts felt to be of high priority in order to reach a rapid decision. Such ‘fast-track decisions’ will normally occur within one week of receipt of the manuscript.

Even though the final decisions are made, authors may dispute a decision and can document good reasons why a manuscript should be reconsidered. A rebuttal process exists. In the first place, authors should write rebuttal letters to the Editor-in-Chief.

In-house submissions-Papers authored by Editors or Editorial Board members of the title, will be sent to Editors unaffiliated with the author or institution and monitored carefully to ensure there is no peer-review bias.

 

 

The journal requires that all authors disclose any potential sources of conflict of interest. Any interest or relationship, financial or otherwise that might be perceived as influencing an author's objectivity is considered a potential source of conflict of interest. These must be disclosed when directly relevant or directly related to the work that the authors describe in their manuscript. Potential sources of conflict of interest include, but are not limited to, patent or stock ownership, membership of a company board of directors, membership of an advisory board or committee for a company, and consultancy for or receipt of speaker's fees from a company. The existence of a conflict of interest does not preclude publication. If the authors have no conflict of interest to declare, they must also state this at submission. It is the responsibility of the corresponding author to review this policy with all authors and collectively to disclose with the submission ALL pertinent commercial and other relationships.

Authors should list all funding sources in the Acknowledgments section. Authors are responsible for the accuracy of their funder designation. If in doubt, please check the Open Funder Registry for the correct nomenclature.

The list of authors should accurately illustrate who contributed to the work and how. All those listed as authors should qualify for authorship according to the following criteria:

1. Have made substantial contributions to conception and design, or acquisition of data, or analysis and interpretation of data;
2. Been involved in drafting the manuscript or revising it critically for important intellectual content;
3. Given final approval of the version to be published. Each author should have participated sufficiently in the work to take public responsibility for appropriate portions of the content; and
4. Agreed to be accountable for all aspects of the work in ensuring that questions related to the accuracy or integrity of any part of the work are appropriately investigated and resolved.

Contributions from anyone who does not meet the criteria for authorship should be listed, with permission from the contributor, in an Acknowledgments section (for example, to recognize contributions from people who provided technical help, collation of data, writing assistance, acquisition of funding, or a department chairperson who provided general support). Prior to submitting the article all authors should agree on the order in which their names will be listed in the manuscript.

In the case of joint first or senior authorship, a footnote should be added to the author listing, e.g. ‘X and Y should be considered joint first author’ or ‘X and Y should be considered joint senior author.’

Author Name Change Policy
In cases where authors wish to change their name following publication, Wiley will update and republish the paper and redeliver the updated metadata to indexing services. Our editorial and production teams will use discretion in recognizing that name changes may be of a sensitive and private nature for various reasons including (but not limited to) alignment with gender identity, or as a result of marriage, divorce, or religious conversion. Accordingly, to protect the author’s privacy, we will not publish a correction notice to the paper, and we will not notify co-authors of the change. Authors should contact the journal’s Editorial Office with their name change request.

Correction to authorship
In accordance with Wiley’s Best Practice Guidelines on Research Integrity and Publishing Ethics and the Committee on Publication Ethics’ guidance, InfoMat will allow authors to correct authorship on a submitted, accepted, or published article if a valid reason exists to do so. All authors – including those to be added or removed – must agree to any proposed change. To request a change to the author list, please complete the Request for Changes to a Journal Article Author List Form and contact either the journal’s editorial or production office, depending on the status of the article. Authorship changes will not be considered without a fully completed Author Change form. [Correcting the authorship is different from changing an author’s name; the relevant policy for that can be found in Wiley’s Best Practice Guidelines under “Author name changes after publication.”]

ORCID
As part of our commitment to supporting authors at every step of the publishing process, InfoMat encourages the submitting author (only) to provide an ORCID iD when submitting a manuscript. This takes around 2 minutes to complete. Find more information.

Guidelines on Publishing and Research Ethics in Journal Articles
The journal is committed to high standards for professional conduct and ethical behavior in all published material. The Publishing Ethics Guidelines details the journal's position as a scientific publisher.

The journal requires that you include in the manuscript details IRB approvals, ethical treatment of human and animal research participants, and gathering of informed consent, as appropriate. You will be expected to declare all conflicts of interest, or none, on submission. Please review Wiley’s policies surrounding human studies, animal studies, clinical trial registration, biosecurity, and research reporting guidelines.

As the member of the Committee on Publication Ethics (COPE) the journal follows its core practices and handles cases of research and publication misconduct accordingly (https://publicationethics.org/core-practices).

This journal uses iThenticate’s CrossCheck software to detect instances of overlapping and similar text in submitted manuscripts. Read our Wiley’s Top 10 Publishing Ethics Tips for Authors and Wiley’s Publication Ethics Guidelines here.

Data Protection

By submitting a manuscript to or reviewing for this publication, your name, email address, and affiliation, and other contact details the publication might require, will be used for the regular operations of the publication. Please review Wiley’s Data Protection Policy to learn more.

All articles published by InfoMat are fully open access where they are immediately freely available to read, download and share. To cover the cost of publishing, InfoMat charges a publication fee when a submission is accepted for publication. There is no fee for initial submission for editorial/peer-review evaluation. Accepted papers will be published under CC BY - Creative Commons Attribution License. With Creative Commons licenses, the author retains copyright and the public is allowed to reuse the content. The author grants Wiley a license to publish the article and to identify as the original publisher. All authors will be directed to the Creative Commons Attribution license (CC BY) in accordance with funder mandates effective on 1 April 2013.

If your paper is accepted, the author identified as the formal corresponding author will receive an email prompting them to login into Author Services; where via the Wiley Author Licensing Service (WALS) they will be able to complete the license agreement on behalf of all authors on the paper.

To learn more about Creative Commons Licenses and to preview terms and conditions of the agreements, please click here. Note that certain funders mandate that a particular type of CC license has to be used; to check this, please click here.

Open Access fees: The Article Publication Charge (APC) is collected from July 26 2022 onwards. Agreement to pay the APC is given at manuscript submission, but will only be charged upon acceptance. For more information on this journal’s APCs, please see the Open Access page.

First Look
After your paper is accepted, your files will be assessed by the editorial office to ensure they are ready for production. You may be contacted if any updates or final files are required. Otherwise, your paper will be sent to the production team.

Wiley Author Services
When an accepted article is received by Wiley’s production team, the corresponding author will receive an email asking to login or register with Wiley Author Services. You will be asked to sign a publication license at this point as well as pay for any applicable APCs.

Proofs
Authors will receive an e-mail notification with a link and instructions for accessing HTML page proofs online/with their proofs included as a pdf. Authors should also make sure that any renumbered tables, figures, or references match text citations and that figure legends correspond with text citations and actual figures. Proofs must be returned within 48 hours of receipt of the email.

Please note that you are responsible for all statements made in your work, including changes made during the editorial process and thus you must check your proofs carefully.

The journal offers rapid publication via Wiley’s Early View service. Early View (Online Version of Record) articles are published on Wiley Online Library before inclusion in an issue. Note there may be a delay after corrections are received before your article appears online, as Editors also need to review proofs. Once your article is published on Early View no further changes to your article are possible. Your Early View article is fully citable and carries an online publication date and DOI for citations.

1. Concepts illustrated in graphical material must clearly fit with the research discussed in the accompanying text.
2. Images featuring depictions or representations of people must not contain any form of objectification, sexualization, stereotyping, or discrimination. We also ask authors to consider community diversity in images containing multiple depictions or representations of people.
3. Inappropriate use, representation, or depiction of religious figures or imagery, and iconography should be avoided.
4. Use of elements of mythology, legends, and folklore might be acceptable and will be decided on a case-by-case basis. However, these images must comply with the guidelines on human participants when they are present.
5. Generally, authors should consider any sensitivities when using images of objects that might have cultural significance or may be inappropriate in the context (for example, religious texts, historical events, and depictions of people).
6. Legal requirements: All necessary copyright permission for the reproduction of the graphical elements used in visuals must be obtained prior to publication. Clearance must be obtained from identifiable people before using their image on the cover or the like and such clearance must specify that it will be used on the cover. Use within text does not require such clearance unless it discloses sensitive personal information such as medical information. In all situations involving disclosure of such personal info, specific permission must be obtained. And images of individuals should not be used in a false manner.

Please review Wiley’s guidelines on sharing your research here. The submitted version of the manuscript, the accepted version, and the published version (Version of Record) can all be deposited on an institutional or other repository of the author's choice without embargo. 

When your article is published online:

• The author receives an email alert (if requested).
• The link to the published article can be shared through social media.
• The author will have free access to the paper (after accepting the Terms & Conditions of use, they can view the article).

Wiley Editing Services offers professional video, design, and writing services to create shareable video abstracts, infographics, conference posters, lay summaries, and research news stories for your research – so you can help your research get the attention it deserves.

InfoMat Editorial Office

Email: editorial@info-mat.org

University of Electronic Science and Technology of China (UESTC)
No. 4, Sec. 2, North Jianshe Road, Chengdu 610054, China.