Behavioral characteristics and renewal mechanism of deadman coke in the hearth under low-carbon ironmaking blast furnace conditions
Sai Meng , Kexin Jiao , Zhenxing Zhou , Jianliang Zhang , Yang Li , Yanbing Zong , Lei Zhang , Xuebin Wang
International Journal of Minerals, Metallurgy, and Materials ›› 2026, Vol. 33 ›› Issue (6) : 1938 -1950.
As the sole solid material in the lower part of a blast furnace (BF), the multiphase reaction behavior of coke within the dead-man region of the hearth is of significant theoretical and practical importance for carbon emission control and low-carbon production. The multidimensional characterization of the occurrence state, multiphase reaction behavior, and renewal mechanism of deadman coke in the hearth was performed through the dissection of a 3200-m3 BF, combining various methods such as rope-sawing residual iron removal, image processing techniques, microscopic analysis, and coke dissolution experiments. The results showed that the deadman root in the hearth exhibited a “curved” shape and a distinct ‘floating’ state, with the floating height at the center approximately 0.45 m, increasing toward the hearth edge. Vertically, the deadman was divided into three regions: the “slag–coke zone,” the “iron–coke zone,” and the “coke–free zone.” The average deadman voidage was calculated to be 54.75% (±0.85%), and the coke particle size was 21.47 mm (± 0.53 mm), based on image processing techniques. A “slag + CaS isolation layer” was identified on the outer surface of the deadman coke during the dissolution and erosion process of hot metal analysis of the “slag–iron–coke” three-phase microstructure indicated that this layer suppressed the carburization reaction and represented the most limiting factor for deadman coke renewal. A coke renewal formula was established from the coke dissolution experiments, and the renewal time was calculated to be 14.74 d. The renewal mechanism of deadman coke was elucidated through comprehensive analysis, and recommendations for low-carbon operation were proposed. These findings provide a scientific basis and theoretical guidance for low-carbon production and fuel optimization in ironmaking blast furnaces.
deadman / coke / blast furnace hearth / renewal mechanism / slag–iron–coke
| [1] |
|
| [2] |
X.Y. Meng, K.L. Pang, M.M. Sun, et al., Study on the characteristics of coke in the coupled reaction between iron ore and coke simulating the blast furnace environment, Fuel, 378(2024), art. No. 132715. |
| [3] |
J.L. Zhang, L.Y. Hao, S.J. Duan, R.S. Xu, K.J. Zhang, and Y.M. Wang, Review on the progress of hydrogen-rich gas injection into blast furnace, Metall. Res. Technol., 122(2025), No. 3, art. No. 308. |
| [4] |
S. Meng, K.X. Jiao, J.L. Zhang, et al., Analysis of the coke distribution characteristics in hearth based on blast furnace dissection, Fuel Process. Technol., 242(2023), art. No. 107650. |
| [5] |
K. Yao, Y. Deng, R. Liu, L. Liu, Y.J. Gao, and Y.T. Liu, Factors affecting the hearth activity of blast furnace and corresponding measures, Metall. Res. Technol., 122(2025), No. 2, art. No. 205. |
| [6] |
|
| [7] |
S. Meng, K.X. Jiao, J.L. Zhang, et al., Dissection study of the deadman in a commercial blast furnace hearth, Fuel Process. Technol., 221(2021), art. No. 106916. |
| [8] |
|
| [9] |
|
| [10] |
|
| [11] |
|
| [12] |
|
| [13] |
|
| [14] |
|
| [15] |
|
| [16] |
|
| [17] |
Committee on Reaction within Blast FurnaceJoint Society on Iron and Steel Basic ResearchThe Iron and Steel Institute of Japan. Blast Furnace Phenomena and Modelling, 1987, Amsterdam, Elsevier applied science publishers: 182 |
| [18] |
|
| [19] |
|
| [20] |
|
| [21] |
D.J. Lee, H.S. Yoon, A.R. Nair, and M.I. Kim, Multiphase flow and interface dynamics in a blast furnace hearth: Effects of slag viscosity and coke diameter, Int. J. Heat Mass Transfer, 246(2025), art. No. 127085. |
| [22] |
|
| [23] |
|
| [24] |
Y.J. Fan, Y.F. Chai, J.Y. Wu, et al., Behavior of coke in the blast furnace for smelting Bayan Obo Mine, Fuel, 309(2022), art. No. 122147. |
| [25] |
|
| [26] |
|
| [27] |
J. Wu, C.F. Mu, X.F. Zhou, Z. Jiang, S.B. Hou, and L.G. Zhang, Characteristics of the tuyere coke in a blast furnace, Metall. Res. Technol., 122(2025), No. 4, art. No. 415. |
| [28] |
Y. Deng, R. Liu, T. Li, K.X. Jiao, S. Meng, and Z.Y. Guo, The quantitative model of hearth activity based on data mining and characteristics of deadman, Metall. Res. Technol., 120(2023), No. 1, art. No. 110. |
| [29] |
|
| [30] |
|
| [31] |
|
| [32] |
|
| [33] |
Y. Deng, K. Yao, Y. Xu, R. Liu, and Z.H. Huang, The process and mechanism of coke gasification dissolution loss in hydrogen-rich blast furnace, Chem. Eng. J., 498(2024), art. No. 155860. |
| [34] |
|
| [35] |
|
| [36] |
Y. Deng, K. Yao, R. Liu, Y.J. Gao, and L.X. Wang, Interfacial reaction behavior in blast furnace and analysis of influence mechanism, Metall. Res. Technol., 121(2024), No. 5, art. No. 509. |
| [37] |
|
| [38] |
P.Z. Zhao, Y.B. Zong, J.L. Zhang, et al., Characteristics of CaS distribution and formation mechanism in blast furnace hearth, Fuel, 366(2024), art. No. 131301. |
| [39] |
|
| [40] |
|
| [41] |
F.J. Liu, X.J. Ning, J.L. Zhang, and K.X. Jiao, Study on effect of hot metal temperature on crucible made of carbon bricks by dynamic erosion, Angang Technol., (2019), No. 1, p. 17. |
University of Science and Technology Beijing
/
| 〈 |
|
〉 |