Microstructures, mechanical properties and corrosion resistances of FCC CoCrFeNiTi high-entropy alloys prepared by pre-alloyed powder mixing and vacuum laser-directed energy deposition

Abstract

In this study, vacuum laser-engineered directed energy deposition (V-LDED) was employed to fabricate CoCrFeNiTi_x (x = 0.1, 0.2, 0.3) high-entropy alloys (HEAs) by strategically mixing equiatomic pre-alloyed CoCrFeNi and CoCrFeNiTi powders. With increasing Ti content, the lattice distortion of the HEAs intensified, grains were refined, and precipitate content increased; however, the face-centered cubic (FCC) structure remained the predominant structure. The strength and plasticity of the HEAs initially increased and then decreased with the addition of Ti. The CoCrFeNiTi_0.3 (Ti0.3) alloy exhibited the best mechanical properties, with a tensile yield strength (TYS) of 604 MPa, an ultimate tensile strength (UTS) of 882 MPa, and a plastic elongation of 13.5%. Compared to the Ti-free alloy, the TYS and UTS were increased by 124% and 83%, respectively. The CoCrFeNiTi_0.2 (Ti0.2) alloy showed the best corrosion resistance with the corrosion potential (E_corr), corrosion current density (I_corr), passivated film resistor (R_c), and charge transfer resistance (R_ct) values of −0.208 V, 4.889 × 10⁻⁷ A/cm², 7.03 × 10³ Ω/cm², and 8.50 × 10⁵ Ω/cm², respectively. The addition of Ti increased the Cr and Ti contents in the passive film, which are easily passivated elements. The multiple effects of Ti on the corrosion resistance were mainly attributed to the formation and composition of the passive film and density of the precipitates.

Keywords

vacuum laser-engineered directed energy deposition / CoCrFeNiTi alloys / microstructures / mechanical properties / corrosion resistance

References

[1] Yen H, Yeh AC, Yeh JW. Chakraborty T. High-entropy Alloys: An Overview on the Fundamentals, Development, and Future Perspective, 2024, Oxford, Academic Press: 647

[2] Korkmaz ME, Waqar S, Garcia-Collado A, et al. . A technical overview of metallic parts in hybrid additive manufacturing industry. J. Mater. Res. Technol., 2022, 18: 384

[3] P.P. Selvam, S. Prabhakaran, B. Vinod, et al., A review of energy efficiency and machine learning analysis for additive manufacturing of direct laser metal deposition, Mater. Today Proc., 2024. DOI: https://doi.org/10.1016/j.matpr.2024.03.034

[4] C.Y. Wang, X.Y. Liu, F. Xing, et al., Microstructure and mechanical properties of TiC/Ti6Al4V composite fabricated by concurrent wire-powder feeding laser-directed energy deposition, Opt. Laser Technol., 181(2025), art. No. 111836.

[5] Svetlizky D, Das M, Zheng BL, et al. . Directed energy deposition (DED) additive manufacturing: Physical characteristics, defects, challenges and applications. Mater. Today, 2021, 49: 271

[6] Z.Y. Rao, X. Wang, Q.J. Wang, et al., Microstructure, mechanical properties and oxidation behavior of Al_xCr_0.4CuFe_0.4MnNi high entropy alloys, Adv. Eng. Mater, 19(2017), No. 5, art. No. 1600726.

[7] Kao YF, Chen TJ, Chen SK, et al. . Microstructure and mechanical property of as-cast, homogenized, and -deformed Al_xCoCrFeNi (0 ≤ x ≤ 2) high-entropy alloys. J. Alloy. Compd., 2009, 488(1): 57

[8] Wang WR, Wang WL, Yeh JW. Phases, microstructure and mechanical properties of Al_xCoCrFeNi high-entropy alloys at elevated temperatures. J. Alloy. Compd., 2014, 589: 143

[9] Z.J. Sun, X.P. Tan, C.C. Wang, et al., Reducing hot tearing by grain boundary segregation engineering in additive manufacturing: Example of an Al_xCoCrFeNi high-entropy alloy, Acta Mater., 204(2021), art. No. 116505.

[10] Y.K. Zhao, K.B. Lau, W.H. Teh, et al., Compositionally graded CoCrFeNiTi_x high-entropy alloys manufactured by laser powder bed fusion: A combinatorial assessment, J. Alloy. Compd., 883(2021), art. No. 160825.

[11] Moghaddam AO, Shaburova NA, Samodurova MN, et al. . Additive manufacturing of high entropy alloys: A practical review. J. Mater. Sci. Technol., 2021, 77: 131

[12] Kong DC, Wang L, Zhu GL, et al. . Heat treatment effects on the metastable microstructure, mechanical property and corrosion behavior of Al-added CoCrFeMnNi alloys fabricated by laser powder bed fusion. J. Mater. Sci. Technol., 2023, 138: 171

[13] P.D. Niu, R.D. Li, Z.Q. Fan, et al., Inhibiting cracking and improving strength for additive manufactured Al_xCoCrFeNi high entropy alloy via changing crystal structure from BCC-to-FCC, Addit. Manuf., 71(2023), art. No. 103584.

[14] Shun TT, Chang LY, Shiu MH. Microstructures and mechanical properties of multiprincipal component CoCrFeNiTi_x alloys. Mater. Sci. Eng. A, 2012, 556: 170

[15] J.J. Li, D. Ouyang, Q.H. Wang, et al., Achieving superior tensile strength of CoCrFeNiTi_0.3 high-entropy alloy via in-situ laser powder bed fusion of CoCrFeNi and Ti, Mater. Sci. Eng. A, 886(2023), art. No. 145649.

[16] S.Y. Liu, C.M. Grohol, and Y.C. Shin, High throughput synthesis of CoCrFeNiTi high entropy alloys via directed energy deposition, J. Alloy. Compd., 916(2022), art. No. 165469.

[17] X.J. Zhu, G.C. Wang, X.B. Wang, et al., Microstructure and mechanical properties of Al_0.3FeCoCrNi high entropy alloy processed by laser powder bed fusion using FeCoCrNi and Al powder mixture, Mater. Sci. Eng. A, 848(2022), art. No. 143468.

[18] Shun TT, Hsieh CY, Hung WJ, et al. . Age heat treatment of the CoCrFeNiTi_0.3 high-entropy alloy. Mater. Trans., 2018, 59(5): 730

[19] Y.T. Ji, H.L. Suo, T.T. Chen, et al., The role of Goss-oriented texture for brass-type texture in nickel-based metals during cold rolling, Mater. Today Commun., 41(2024), art. No. 110823.

[20] J.X. Hou, J.W. Qiao, J.H. Lian, et al., Revealing the relationship between microstructures, textures, and mechanical behaviors of cold-rolled Al_0.1CoCrFeNi high-entropy alloys, Mater. Sci. Eng. A, 804(2021), art. No. 140752.

[21] Haase C, Barrales-Mora LA. Influence of deformation and annealing twinning on the microstructure and texture evolution of face-centered cubic high-entropy alloys. Acta Mater., 2018, 150: 88

[22] F. Shahriyari, M.H. Shaeri, A. Dashti, et al., Evolution of mechanical properties, microstructure and texture and of various brass alloys processed by multi-directional forging, Mater. Sci. Eng. A, 831(2022), art. No. 142149.

[23] Liu YN, Ding Y, Yang LJ, et al. . Research and progress of laser cladding on engineering alloys: A review. J. Manuf. Process., 2021, 66: 341

[24] H. Liu, T. Zhang, S.F. Sun, et al., Microstructure and dislocation density of AlCoCrFeNiSi_x high entropy alloy coatings by laser cladding, Mater. Lett., 283(2021), art. No. 128746.

[25] L. Xie, G.D. Wu, X.F. Fu, et al., Microstructure and hardness of CoNiCrFeTi_x high-entropy alloy coatings prepared by laser cladding: Combining experimental and molecular dynamics simulation, Mater. Today Commun., 40(2024), art. No. 109597.

[26] Calcagnotto M, Ponge D, Demir E, et al. . Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD. Mater. Sci. Eng. A, 2010, 527(10–11): 2738

[27] Nix WD, Gao HJ. Indentation size effects in crystalline materials: A law for strain gradient plasticity. J. Mech. Phys. Solids, 1998, 46(3): 411

[28] Han CS, Gao HJ, Huang YG, et al. . Mechanism-based strain gradient crystal plasticity—I. Theory. J. Mech. Phys. Solids, 2005, 53(5): 1188

[29] Ma XL, Huang CX, Moering J, et al. . Mechanical properties of copper/bronze laminates: Role of interfaces. Acta Mater., 2016, 116: 43

[30] Q.Z. Xu, D.W. Jiang, J. Zhou, et al., Enhanced corrosion resistance of laser additive manufactured 316L stainless steel by ultrasonic surface rolling process, Surf. Coat. Technol., 454(2023), art. No. 129187.

[31] D. Jiang, H.Z. Cui, X.F. Zhao, et al., Synergistic improvement of wear and corrosion resistance of CoCrNiMoCB coatings obtained by laser cladding: Role of Mo concentration, Mater. Des., 219(2022), art. No. 110751.

[32] Wei YK, Li YJ, Zhang Y, et al. . Corrosion resistant nickel coating with strong adhesion on AZ31B magnesium alloy prepared by an in-situ shot-peening-assisted cold spray. Corros. Sci., 2018, 138: 105

[33] X.H. Gu, X.R. Li, Q.H. Zhang, et al., Passive film and surface characterization of Al_x(CoCrFeNi)_100−x (x = 0, 5, 10, 15, 20) high entropy alloys, Intermetallics, 162(2023), art. No. 107994.

[34] X.Y. Wang, Q. Liu, Y.B. Huang, L. Xie, et al., Effect of Ti content on the microstructure and corrosion resistance of CoCrFeNiTi_x high entropy alloys prepared by laser cladding, Materials, 13(2020), No. 10, art. No. 2209.

[35] K.J. Lu, Z.R. Lei, S. Deng, et al., Synergistic effects of grain sizes on the corrosion behavior and mechanical properties in a metastable high-entropy alloy, Corros. Sci., 225(2023), art. No. 111588.

[36] J.G. Yang, D.C. Feng, Y.F. Liu, et al., Excellent corrosion resistance of electron beam welded joint and remelted layer of eutectic high-entropy alloy AlCoCrFeNi_2.1, Intermetallics, 154(2023), art. No. 107822.

RIGHTS & PERMISSIONS

University of Science and Technology Beijing